openrcforums

I have it configured in realflight rc7, and had no problem. In which port are you connecting?

My opinion is, go for ersky9x, much better, more complete, much more frequently updated. Opentx developers are betting on the taranis right now, go check the changelog. OpenTX is great, but only for Taranis. Hi all, Yesterday I installed OpenTX 2.0.13 on 9xr pro, where can I find manual for this ver...

In excellent condition. As good as new. 5€ each. Postage included. Please be advised that these gimbals's wires are cut so i could replace them with the taranis ones, but there's enough wire to solder to. No Frsky box included due to weight management. Box will have a fragile warning for good treatm...

I never say never, but im really not inclined to opening it again, unless its a malfunction.

And so my frsky taranis gimbals have arrived from hobbyking, non amplified and at least three of them had some sort of glue on the wires, as you can see, IMG1.jpg First i removed the wires from the plug and used those female plugs to insert the striped wire tip from the tx and soldered them. IMG2.jp...

jhsa wrote: Heli Setup - Respect for the Heli guys.. This is their mixer (I think)

And i have to thank you for this.
Obvoulsly this menu is very important for heli setup. thumbs up!

Hi everybody,
Can anyone tell me for sure if this version of opentx or opentx itself, at this point, is able to deal with the reversed taranis gimbals issue in a 9X?
For what i have searched in this forum, i havent found this info.
thx in advance.

Hi GajiraChongChong, If I remember correctly, the Pot failure began about a week or so after the upgrades. We were using these 9x Radios a lot and the first symptoms were the throttle dot would indicate being out of calibration. Also the throttle dot would float around by them selves. Recalibration...

Hi bob195558, Thx for info, perhaps i didnt explained myself the right way, but it was never my idea to swap the 9xr / 9xr-pro gimbals. My idea was to swap the 9x ones, since they s**k, even though they are similar to the 9xr / 9xr-pro ones. If they felt like the 9xr ones, perhaps i would never do t...

Ok João, thx for your reply, im getting to see more clearly now.

Hi GajiraChongChong, I think all the earlier amplified gimbals are gone now, if not I think both er9x and Open9x have in the firmware the ability to correct the direction of the Gimbals pots. Thx for the reply bob195558, Thats good to hear, because i ordered 4 gimbals from hobbyking and they are on...

Good Evening everyone, for what i have seen er9x can handle pretty well the taranis gimbals and for what i last saw opentx couldnt handle. My question is if at this time (2.1.13) it can handle? Ive also seen posted the matching connections (colors) for the amplified gimbals, what about for the non-a...

I'm guessing you are loading the firmware from the "ersky9xr test versions" post. Try a later version from this post: http://openrcforums.com/forum/viewtopic.php?f=7&t=4676#p65894 . I fixed a "model name editing bug" on the 15th Sep. Sorry for the confusion, I'll update the ...

So, under the model name you have "voice", right? Is this field you're trying to edit? João No man, when i try to edit the model name. So you highlight the model name and press menu so you can edit the name. When you press menu, is the sound "easystar" played? No, the letter sta...

jhsa wrote:So, under the model name you have "voice", right? Is this field you're trying to edit?

João

No man, when i try to edit the model name. So you highlight the model name and press menu so you can edit the name. When you press menu, is the sound "easystar" played?

wait a second, the model name or the sound file name? :o The sound file with the model name, so for example, when i press the menu key, easystar is played and the letter doesnt change. I press again, to attempt changing and again its played. So i can change the letters i have to keep pressing the m...

did you change the voice pack in the sd card? HK messed up the voice files.. here, try this one.. openrcforums.com/forum/download/file.php?id=8294 Easystar is the name of an example model.. it's file number 0260. from 260 on you have the model names.. Have a look at the .doc file that comes with th...

Hi, Im having trouble flashing the latest firmware in my 9XRpro. Also im having trouble restoring eprom, since somehow, after some failed flashes i lost the settings. So i decided to try the r212 test file, aparently everything went fine, only now, when i try to change a model name, when i press the...

im not that advanced user, but now i understand why, or at least theoretically i know the reason of the incompatibility.
thx Mike.

well, what do you know, its working like a charm.
many thx for your support.

Man, i have it already. i just mentioned frsky because i had tried it and obviously the same problem persisted. So right now i have the latest opentx with the latest telemetrez firmware and this happens. both switches highlited constantly.

yes, right now i have telemetrez option selected and installed, but still the same problem.
actually i have another question:
So you can use the frsky telemetry with opentx, you select telemetrez or frsky in firmware preferences?

Hi,
I have a turnigy 9x with the smartieparts board and TEZ (TEZ with r90 firmware), stock processor and when i install opentx 2.0.11 the THR and AIL switches keep highlited. I tried with er9x r813 and all worked fine, so there must be prob with opentx, i guess. A helping hand would be apreciated.
thx

jhsa wrote:It looks like you were flashing an html file then

João

No mate, i would go to the link and "right click, save link as".
An html file is identified by the browser, anyway something went wrong for sure.
Now solved.
A big Thx to Mike!

OK, back to r90 then. Please double check the file you have, as s_mack says, is the valid hex file and not the html file. You may well have it correct, but go to this page: http://code.google.com/p/9x-telemetrez/source/browse/trunk/src/telemetrEZ.hex , then right click on the "View raw file&qu...

If the flashing of the r90 for the TEZ is OK, then this should now work. I understand the switches did work when you had r86 on the TEZ and the TEZ > r89 option turned off. To check the flashing is working correctly, could you put r86 back on the TEZ and check to see if the switches then work (with...

Gotcha, thanks Mike. So then back to this guy's post: Hi guys, i have the latest er9x firmware version and the latest (v86) stable telemeteEZ firmware. The point is when i turn the TelemetrEZ to on, in hardware menu, the throttle and aileron switches get irresponsive. If i deselect it then everythi...

I have er9x-frsky r813 version (MOD: FRSKY NT), now with TEZ r90 and now, even if i deselect it in hardware menu, the switches keep staying highlited and irresponsive.

Hi guys, i have the latest er9x firmware version and the latest (v86) stable telemeteEZ firmware. The point is when i turn the TelemetrEZ to on, in hardware menu, the throttle and aileron switches get irresponsive. If i deselect it then everything stays well. Can anybody give me a hand?