openrcforums

Indeed it is golden. book marked.

willhac:
which version of ersky9x you are using? I was using the latest ersky9x test version Jan-02 (which has the software com1) and Multi 02-01(latest hex from github) and did not get any telemetry from Frsky either via com1(with built in rs232) or com2(without rs232 access pad).

Mike: on the A7105 Hubsan module, I get TmOK as '1' and get A1,rssi, tssi but voice alarm keeps coming up 'no telemetry' another question, on cc2500 module using Frsky protocol, the telemetry 'usrproto' should use Frsky or Frskyhub? Using today github Multi hex , I could not get any telemetry data f...

I think a missing dot CAN be a good indication. But, when starting a new model, the trim is dead center, you can't tell that at all whether T-trim is on or not. Ah, may be a different dot, like a triangle dot or just a flat '-' . As long as I know the dot is for what, that is fine with me. Move the ...

No I don't fly fuel engine, that missing dot certainly confused the hell out of this electric flyer.
May be a different style of trim bar for T-trim in ON, so it is clear it is different for fuel engine and know right away T-trim is ON.

wow, looks like both type will work, if the STAR can handle the extra weight.
my current 138mah that fit in the battery tray is 6.22 x 10.87, the thickness(6.22) can expand a little more if needed.
Great. PM sent.

Mike: could the Telemetry-> UsrProto has anything to do with the 'no telemetry' thing? There are 5 choices: Frsky,WSHhi,DSMx,Ardup,FrHub (I just noticed the newer Ardup FrHub from what I used to use) I set hubsan at Frsky. What is the difference of Frsky and FrHub? I have been using Frsky for both M...

jhsa: I think I misunderstood the 'T-trim', I thought it was 'instant Trim' on/off. most model I use instant trim, especially during testing phase. I automatically turn it on. but still that dot is working for every other trim including throttle trim without T-trim ON. It is confusing to me. May be ...

errrrh, where is TmOK telemetry value? I did not set any voice alarm for Hubsan , it is coming from the system. the only place I did is the radio setup-> alarm->alarm warning : ON. another question, where is the tx battery adjustment. I can't find it any more? Used to be 'up' button and there is a p...

Mike:' Just tried the new test version Jan 02. Yeah, the telemetry is coming through AR9X com1. :) I get telemetry data from Hubsan, A1, rssi, tssi(now steady and same as rssi, before tssi was off and on) from both com1 and com2-nonrs232 (I have a switch to change pin5 from com1-rs232 to com2-nonrs2...

Mike: I will use ch9 on ppm2 1st ch to try the multi again. I did use 'follow' cause I thought you changed that in r218j. And Hpnuts just recompiled a version of Multi code. I will try that with the ppm2 ch1 set to '9'. but the trim thing, I can only report what I see. uploading a video, may be you ...

Mike: with r218J v.3494 using AR9X board and Multi 16ch 30-12 I found a few things: 1. on Multi protocol 'Flysky" there used to be a type 'V9x9' (and may be others, can't remember for sure) now is missing, only type: Flysky there now. so my v959 light switch won't function with type: Flysky 2. ...

What is the thickness and width of the 100/130 mah hyperion measure? I want to be sure it can squeeze through the battery cage as shown in my pic.

Well, while watching the New Year's eve fireworks, I opened up this little bugger and try to replace the battery with replaceable lipo. It is doable. here are some pics: 20151231_222107.jpg 20151231_222309.jpg 20151231_222219.jpg 20151231_222924.jpg 20160101_002511.jpg 20160101_002553.jpg 20160101_0...

OK, good luck and Happy New Year!

You said your T9x is new. Does that have a m64 chip or m128 chip? I recently got a new T9x which comes with a m128 chip.

that is pretty darn good. I may get one when (and if) I get a XJT later. Don't know would spend the money on when I already have DHT and DJT. thx.

I think I read some time ago, similar situation. Have you tried to clean up the avrdue installation in your computer and reinstall clean'?
and check if the T9X functions with stock FW in it.

I use the FrSky, high resolution vario. It has a resolution of 0.1m (4 inches), and raising it off the bench I do see that sort of change in the reading. Mike. sorry Mike to fill the space with off topic question. I always have this question about the alt sensor. I have a oXs sensor which is also v...

I hope some one can tell me whch sensor they use to get a accurate ALT. the GPSalt is workable to have max/min.

thank you Mike. At least I now know for sure I am not crazy. :lol: Yes, I have used both model 33, 34 to test Multi hub protocol and change back to ppm to compare with DJT. There is no problem with my AR9X and DJT after all. ;) I guess you will put something in the FW in the future to make it automa...

I am making a new Multi module, I have two choices I can use: http://www.ebay.com/itm/291593792701?_trksid=p2057872.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT https://alofthobbies.com/250mm-receiver-antenna-frsky.html both have uFL connector directly to the module. and both are dipole antenna. I ...

Mike: I think we are getting something here. I set up a brand new model, and there is no issue with DJT binding and servo/ESC. But the other model still have the same problem. Now I remember these models are transferred from my skyboard Tx with eepskye r419. Maybe the eeprom conversion is the proble...

the ID^, ID-... is already in r218i test version.

this little bugger is using 80mah battery hard wired. I did not have a chance to replace with a removable one yet. but I 'think' the HK 100mah lipo which I have a few 'may' squeeze in there. (judging empirically with eye balling). I have to open it up to see. the little thing is so small, I don't ev...

Well, I wish I could say, ah ha, that stupid plastic. But no, I removed all the plastics around the pins, I even removed a little of the plastic riser for the back plate to move the pins just a hair out of the bay. Nope, either. I figure I will set up a model so both Flysky and DJT both can run ppm ...

Yes, I did. ;) Found that out right away when I 1st put that DJT in there. I did left about 1 mm not fully removed but the module is fully seated flush with module bay, won't go any further. I will remove all of it tonight. Also, I did some test during lunch break (sorry can't eat well when there is...

edit: It is a brand new T9x and brand new AR9X. I got this tx just for the aR9x. I was using the Tx with previous version of ersky9x without any problem. Only this is the 1st time I used DJT and new r218i with it. the quick test I did earlier before I left home with Flysky module is even more puzzli...

DJT telemetry is connected to com1. Multi telemetry is to com2 nonrs232. I will check the trainer and DJT without telemetry. If ppm is not working, Multi should not work either, but Multi is working fine, only telemetry is not right. edit: Just ran a quick test before I left for work by plug in a Fl...

Mike: just got home. to clarify everything, I redid the tests as follows (use the same DJT and D4R-II): DJT on my skyboard Tx with older version FW(v2788 r218), no issue, binds, telemetry, servo/ESC normal. protocol: ppm tx/rx wired through pin/pad directly to com1 Multi module on AR9X (218i test FW...