openrcforums

This is awesome! We now have online, printed and PDF options:)
If you're looking for an
Online Manual http://rcdiy.ca
Printed Manual https://alofthobbies.com

Reserved

Reserved

Reserved

Reserved

I added a write up on latency/delay when selecting a channel range of 1-8 vs. 1-16.
http://rcdiy.ca/opentx-transmitter-firm ... nnel_Range

Anyone else got ideas?
Maybe try the Aloft Hobbies forum. They are a FrSKY repair facility and they may have seen this before.

When you wrote the firmware did you have check compatibility selected?
Can you boot into boot loader mode? Off horizontal trims pulled to centre, on.

Please see
https://www.rcgroups.com/forums/showthr ... University

Updated this navigation diagram.

If you have memory problems use luac build option.
Run Lua Script in Companion simulator.
Take luac file created and run it on the transmitter.

Anyone know the actual precision sent to the RX? The XJT module handles the Tx Rx communications. Not OpenTX. While not directly answering your question this article is interesting and highlights the differences/non standard way the pulce widths are translated into physical movement. https://www.po...

https://github.com/opentx/opentx/blob/1 ... ntx.h#L262

/ RESX range is used for internal calculation; The menu says -100.0 to 100.0; internally it is -1024 to 1024 to allow some optimizations

thebriars0 wrote: ↑Tue Feb 06, 2018 7:43 pm

rcdiy wrote: ↑Thu Jan 25, 2018 5:17 pm On a MAC use Grab
On Windows use the Snipping Tool
Both apps supplied with operating system.

The snipping tool in Windows will not work with drop down menus, they disappear as soon as you select the snipping tool.

I use the delay feature.

Image updated
Current one here
http://rcdiy.ca/opentx-transmitter-firm ... avigation/

Added a new navigation and screen flow overview image

Wonder if it would be used more if printing the attached was easier to get to?

Oops... apologies:)

New video added to the manual.
Redundancy
https://youtu.be/DoQH2PCqhAY

On a MAC use Grab
On Windows use the Snipping Tool
Both apps supplied with operating system.

There is a new 2.2 thread
http://openrcforums.com/forum/viewtopic ... 45&t=10576

If one has an old boot loader then
- place firmeare on SD card (using a PC and card reader)
- sd card in tx
- use SD Card screen and browse to the file
- long press enter on the file
- select "Flash bootloader"

That page was last updated
Apr 19, 2017
@LapinFou LapinFou Update Tx-FlyskyTH9X.md

Since then OpenTX has added support...

BUT.... you are off-course 100% correct m128 does not have the build option in companion....
Apologies:)

Model setup screen
At the bottom
External RF
http://rcdiy.ca/opentx-guide/opentx-tra ... del-setup/

Fixed already for 2.2.2

The SxR (S6R & S8R) receivers provide stabilization, level, knife edge and hover flight modes. Setup instructions and tips for the SxR have been gathered from a number of different sources and put in a blog post. Check out the blog post and video. https://youtu.be/XIe9nsuOJtU http://rcdiy.ca/sxr...

Posted
https://github.com/opentx/opentx/issues/5630
I noticed this while writing the manual but was able to work around it...

Oops... apologies... you had it in the subject...

Transmitter?
Firmware version?

You may still want to ensure the bootloader is the same on both radios. Horizontal trims in, power on. See bootloader version on that screen.