openrcforums

Have a look here...


http://code.google.com/p/companion9x/do ... x-1.39.dmg

Just few comments about the horus:

The three pots seem very near each other
The power switch as it is can be operated by mistake while blindly looking for pots using the finger.

algo wrote:The immediate -100 is a safety feature (think: throttle cut) so it can't be slow and it doesn't need to be. Increasing on the other hand always needs to be slow.

Oh well, I guess I shouldn't expect the firmware to be able to do anything.

Then just use slow up and not also slow down.

If you have a slow the it's supposed the parts need a given time to complete the movement, if you switch back fast, you are breaking this rule... Also consider the opposite... you are at 21 you switch back to -100 and then suddenly to 21 I prefer the servo to stay almost in place at 21 instead of mo...

First before anything else thanks for donations, About expo/dual rate settings, well channel order (order on the receiver outputs) should not be confused with stick order (here the mode is much more appropriate) And also in this screen we mimic the radio. So the answer for the moment is no, just to ...

There still is a very small bug about image greyscale the dialog for burning flash to TX:
It has been fixed too, but I will delay a little the next release.
Old c9x users are used to fast bug fix and several minor releases but new users maybe get confused...

i use gimp...
i will do a small document to explain

you need 4 seconds... the difference with your one is that you need to use and intermediate channel to get 0.2 sec between 10 and 21 I try to explain why it works better. Slow up and down apply to full channel range. so to the time ch9 takes from going from -100 to 100 we change ch9 instantaneously ...

Try now..

May we have a copy of the beeping model ?

With a 3 points curve, easy and with little mix.

It's not difficult...

you should try....

remove timer10.wav or wait next shortcoming version...

Is fixed in shortcoming release

you will get more contrast adjustment in next release...

For phoenix 2000 google is your friend.
http://www.amax-toys.com/producer/1/syd ... -3-550.jpg

but also this one

http://www.winning-models.com/images/Ae ... 2000ok.jpg

Maybe the first is better to get an artwork.

At the moment I'm only aware of a beta firmware, but main improvements are in latency and precision as with PXX the radio talks to the module in digital.
but in this field Mike is better than me.

Have a look if you like this one:

PXX is the digital way FrSky uses to control modules. (aka FrSky PCM)

Because DJT is for DJT modules upgraded to PXX.

depending in which folder you have copied them you may need to grant full control to everyone in the SD structure path.
Expecially if they are under C:\Program...\

Maybe we need to find the time to write/amend companion9x manual too...
It has a lot of automatic stuff that may confuse people...

Bertrand, Bezier curves will be awesome but: 1) they require floats, 2) editing a bezier on screen is not nice as each point requires a couple of point (the point itself and the control point) 3) beziers can be multivalued really a huge attention has to be done to the control points even if you just...

The simple reason is that when module is set to work in d8 mode you cannot use failsafe settings as the failsafe must be set in the receiver

Without the spreadsheet the idea wouldn't have came...
But this is the way this software grows: by means of good suggestions and highlighting of possible needs..

Really thanks to all of you.

I suppose it can be related with this fix that was done recently and still not published.

(it will be soon)

Scott, thanks for a great idea...

Just to add in FAI mode telemetry is not completely disabled you still have available (as per FAI rules) RSSI and A1/A2 (which normally are devoted to model batteries)

Confirmed there is a bug related to RUD channel group.
I will fix as soon as possible.

Fixed in SVN will not be present in next release

Tested right now in my wife PC (win xp),
I cannot reproduce