openrcforums

Ok so from what I understand 650 is the upper value and -800 is the lower value. Above or below it becomes choppy or disconnect. Then the middle value is (650-800)/2=-75. Try to set the value to -75, then rebind your RX and test to see If you can reproduce the issue (I'm thinking you'll be able to)....

By the way, have you tried yet to change the fine tuning on CH15?

Pascal

Ok so it's not that easy to reproduce. I may try harder tomorrow
If you are able to reproduce the issue, could reload the protocol instead of power cycling the RX? Reload means for example to change RX_Num from 0->1->0 or change the protocol or...

Pascal

If you always look for AFHDS2A packets if AFHDS2A is the current protocol then can you OR option with 0x80 all the time and get rid of the T-Rate option leaving only Rate? I like to keep the value option open for other radios in Multi. Like I've said I don't think er9x can decode full telemetry fram...

The protocol supports 2 telemetry types based on the option 0x80 flag. If option has 0x80 set then multi forwards the full telemetry frame. That's the T-Rate on ersky9x (which is not ovious and even hard to look for). If option does not have 0x80 set then multi forwards FrSky Hub. That's the Rate on...

Oh I see what's going on... If you leave option as it is by default Rate 50, the module is sending data back (RSSI and others) using a FrSky telemetry style but I can't get the radio to display it. Even if I set Detect Telem to select and then try FrSky, FrHub or HubRaw nnothing seems to work. I had...

Ok, I've pushed on gihub the version 1.2.0.5 which includes the the A7105 frequency tuning on channel 15. You have to uncomment this line in _Config.h to enable it: #define USE_A7105_CH15_TUNING . Just affect P1 to Channel 15 (100%) and turn it around. When the pot is centered, ouput 0.0 on ersky9x ...

I'm still working on it... It's coming... I'm trying to do it right the first time... By the way FrSky V/D/X are using the CC2500 RF component and not the A7105 like the AFHDS2A protocol. So the test only validates that the module general operation works along with the CC2500 but does not show anyth...

Let me look have a look. Channel 15 is the best match for this since none of the A7105 protocol make use of it.

Pascal

You could also try to tune the A7105 frequency for your module and see if it helps. (AFHDS2A is using the A7105 RF component) In the latest multi code and in _config.h, locate the line #define A7105_FREQ_OFFSET 0 Change the offset value and see if it's better, sadly you need to reprogram the module ...

Hey, looking into the issue. First the problem with the afhds2a receivers is that they run different firmwares which makes it really difficult. (You can update the RX firmware from the orginal TX). The weird thing I see reported is that it does work/not work by just turning on/off the RX a couple of...

If the range is low, it can be that the PA/LNA pins are reversed on the orange module you have. To swap the pins, open the file "MultiOrange.cpp.orangetx" or "MultiOrange.cpp" and uncomment (remove the "//") from this line which is at the begining of the file: //#define...

Compilation should be fixed now. Please try the latest version from Github.

Pascal

I've posted a new version of Multi on GitHub which I hope will address the above FrSkyD telemetry issues. Can someone test?

Pascal

Quick post to share my experience on mounting Taranis sticks on a 9XR/9XR Pro. I've followed the post located here to get me starting: http://openrcforums.com/forum/viewtopic.php?f=122&p=99332#p99332 But once in the radio the sticks are not able to reach the corners anymore since they are touchi...

Just wanted to share my setup: https://lh3.googleusercontent.com/4lPYFXoAv9hb_x5Cwjq8bMwqPPFmpjqGzrlpR8EMK8oevMbmaHAE4CTqgburviQgx7Pye5esC7IxdfT5UIk5dLww_l6yTMeqaFM7EpOlXjQjoQZygngcnXyCiRNwYgg9lxIUGck6rFCbbJWO1M8NuSTHgFpoA9iWiYF9vmbbBQcNcSNql_BXovbLIJDYtWYjlHHJW8Y60EDRgzjlBBRGVp75XgmMq6AFgCHn-wp6U5D...

Ok my friend's TX was not using the latest voice pack so this is why...
Only the Master TX is giving the warning which is ok.
Sorry for the trouble.
Thanks, Pascal

I've got your latest voice pack installed and I'm not getting anything when I switch one or the other TX...

Hi,
Trainer is working over bluetooth between the 2 x 9XR Pro
I've used the bear HC-05 without the PCB since all the stuff provided by the PCB is uneeded anyway and it takes less space in the TX.
I'm wondering if I can add a voice alert on bluetooth link connection lost?
Thanks, Pascal

Hi Mike,
Will it be possible to get the model select menu to show up at boot if a button (or multiple) are pressed before a model is even loaded?
If you think this is possible, could you give me some pointers and I'll try to give it a go?
Thanks, Pascal

DIY Multiprotocol TX Module. Every details on this page: https://github.com/pascallanger/DIY-Mul ... -TX-Module . It's well integrated with er9X and ersky9x.

They work fine yes but the problem is that they introduced the 3G/6G mode on the latest models. So the old HT8 modules are not compatible...

@Gerhard
There are multiple versions of the HT8 and only the latest can send the 3/6 axis info on CH7... The version is written on the pcb if I remember correctly.
Otherwise you can always use the DIY-Multiprotocol-TX-Module for this
- Pascal

Hi, I'm looking at the ArduVoice module since I'm running out of models in my 9XR. I still have a lot of free EEPROM space but 16 models are just not enough... I have a couple of questions: 1. 9XR has a built in and working backlight function. Do I really need to connect the backlight on this module...

Mike, I've got no idea on how a sbus frame is formated but I'll have a look at the code. If you've got info somewhere I'm happy to get pointers :-) As you know, we need 3 bytes on top of the 16 channels to code the protocol selection and other stuff. I do like as well to get a CRC to be sure of what...

Hi, The Multi-protocol option which appeared in r818 is still a work in progress. Thanks for Mike for checking and including it. I'm working on this new option with Midelic. Since the r818 release, the menu has been extended with a lot of choices and configurations. The module supports currently 12 ...

Hi Mike, I've started to implement my changes. I don't really need a lot of more space but still a little more flash and memory... When I will have something working on my 9XR, I'll send it to you for review and test. At that stage you could confirm if it fits in both Flash and RAM for mega64/128 an...

Hi Mike, Ok the difference was nothing apart that my username was longer, subversion a bit shorter,... creating a shorter/longer code which is affecting the offsets. So nothing to worry about in fact... I'll compile the 128 as you suggested and upload it. Question for you: If I make changes to er9x ...

Thanks Mike for your quick reply. I'm now back to AVR-GCC 4.8.0. 1. Compiling with only PHASES=YES still does not give the same hex which sounds strange. In fact it's similar but some bytes have a value with + 0x20. I don't know if you ever seen this... 2. I tried to compile with CPU=128 PHASES=YES:...

Hi, I'm trying to compile er9x rev 817 under Windows found here: http://er9x.googlecode.com/svn/trunk/. After upgrading WinAVR with avr-gcc to 4.9.2, I've been able to build er9x with no parameters. I've not tested the hex file generated but it's not equal to the one available on the repository (eve...