openrcforums

I've just had a look and I'm seeing a message #166 called "Radio" that also has RSSI in it. I'm not clear that message #109 (in your post) exists still. Anyone know which message (or if both) carry the RSSI value? Mike. found this http://diydrones.com/forum/topics/mavlink-packet see at th...

Hmm, a scope would be really helpful now to follow the audio signal :( Do you have a little audio amp? If you take a piece of audio cable (with one wire and a sleeve), make some kind of probe with a BBQ skewer and a needle, you could follow the audio signal. The wires that come from the headphone j...

MikeB wrote:Yes, it should help, I've just had too many other things to do thatI haven't got around to looking at this.
I take it you are using openlrs, so not the Arduino over FrSky.

Mike.

no worry mike i imagine that you should have a lot of work. yes i use openlrs and it work perfecltly with mavlink proto.

Can you find which MavLink message the RSSI value is in please? Mike. I found this, http://uploads.tapatalk-cdn.com/20160823/3387a7819e938a44c34914f8f48646c9.jpg http://uploads.tapatalk-cdn.com/20160823/b192c02c7b7f4b145e87cc06c0a729c5.jpg http://uploads.tapatalk-cdn.com/20160823/ab01bd7a3029c5f1a6...

Thanks for your help. I will try to make a prob after work and see it. The audio has made a loud sound till no sound when i was making some setting on a model. It appened befor i installed the bluetooth. Do you have a PCB wiring that i can follow the audio signal? Envoyé de mon GT-I8190 en utilisant...

Yes between L1 and L4 5v. The only mod i have is a bluetooth module

Envoyé de mon GT-I8190 en utilisant Tapatalk

I see exactly 5v

Envoyé de mon GT-I8190 en utilisant Tapatalk

Already done. Same very little sound. No i don't have an oscilloscope

Envoyé de mon GT-I8190 en utilisant Tapatalk

If i plug some headphones i only hear a very very light sound and i set volume to maximum. I tried many sd card.

Envoyé de mon GT-I8190 en utilisant Tapatalk

i still have checked the speaker and work fine

I'm more and more convinced it is a hardware problem :( We will have to start looking for voltages and making some other measurements.. it is difficult to help not having the radio in front of us :( but we try. Are you prepared for it? How good are you with a soldering iron? When making measurement...

Can you find which MavLink message the RSSI value is in please? Mike. I found this, http://uploads.tapatalk-cdn.com/20160823/3387a7819e938a44c34914f8f48646c9.jpg http://uploads.tapatalk-cdn.com/20160823/b192c02c7b7f4b145e87cc06c0a729c5.jpg http://uploads.tapatalk-cdn.com/20160823/ab01bd7a3029c5f1a6...

Probably not. Where does the RSSI signal come from? If you are using "mavlink over FrSky" with an arduino doing the conversion, then the RSSI is coming from the FrSky receiver. I have no idea where any RSSI value originates when using openlrsng. When you use mavlink as the "Usr Proto...

Good news for me, i will try this on evening. Thanks jhsa

Envoyé de mon GT-I8190 en utilisant Tapatalk

in openlrsng configurator i can select the protocole to use for telemetry, frsky or mavlink (transparent). If i select frsky the rssi comes from the receiver corectly but if i select mavlink (transparent) no rssi comes from the receiver. i beleive that is due to the openlrsng firmware...

hi mike, i would like to know if the rssi is outputed on the last mavlink firmware (mavlink proto)? as i'm using gitsly branch of openlrsng i have no rssi signal with Mavlink proto, but if i use Frsky proto, RSSI is ok.
thanx a lot
sam

Hello. Does anyone knows why rssi won't work with gitsly branch of openlrsng. It works perfectly with the master branch but not with gitsly.

Envoyé de mon GT-I8190 en utilisant Tapatalk

ok i'm done. My bluetooth receiver was damaged lol. Telemetry is ok but i think there is some error with the flightmodes. For example when i set in FBWA mode on apm it display LOITER. Or maybe this is because i use arduplane and not arducopter peraps.

I believe my bluetooth doesnt work over 9600. I managed to connect with TOWER on android and i have all flight data and parameters. Bit still nothing on the pro with all com ports.

Envoyé de mon GT-I8190 en utilisant Tapatalk

I 've looked to the debug menu i have corectly 4F4B in the first line. I managed to connect to MP with bluetooth only at 19200 but needed to set the apm, MP, the hc-06, and the bluetooth receiver on the computer at 19200. However i have the flight data but can't have the parameters. Envoyé de mon GT...

first of all i tried to use a hc-06 bluetooth module in the pro also, connected to com3 with apm connected to the pro in first (no response with MP) and directly to tx/rx of apm then, but still no response of MP. Is there a specified baudrate for bluetooth?

hi mike, i tried to test this new firmware but there is no data received for me. i tried both com1 and 2, inverted and non inverted, differents baudrate in the apm and in the paramater menu of telemetry, and also differents protocole in MP for the seial data of the apm, tried to connect the apm dire...

I will test this update as soon as possible. Congratulation for this awesome work mike.

Envoyé de mon GT-I8190 en utilisant Tapatalk

Hi mike, i can test your last release if you want.

Envoyé de mon GT-I8190 en utilisant Tapatalk

Maybe this site can help you too:
http://marc.merlins.org/mirrors/flyingf ... n-lrs.html

At the moment ersky9x doesn't support native MavLink telemetry data. I've just added support for MavLink over FrSky, by using an Arduino to convert between them. From that Arduino code I will be adding native Mavlink support to ersky9x. Mike. Ok thank you for your support but can you tell me if i c...

MikeB wrote:What telemetry data are you sending over the orange open lrs datalink?

Mike.

Hi mike. I send mavlink data with my apm

Envoyé de mon GT-I8190 en utilisant Tapatalk

hi everyone. my name is sam and i would like to knwo if someone can explain me how to make working telemetry with my 9xr pro and orangerx open lrs TX and RX please? i'm searching since many months but i think maybe forget or don't understand something lol. i still have ersky9x firmware on my 9xr pro...