openrcforums

Did you already delete your logical switch?
Beside that, I wouldn't know what to change.

Can you take pictures of the choices you have in this tiker menu. Maybe take pictures of the pull down menu options?

I don't know FrOs but in OpenTx its a timer setting. You can choose different trighers for the timer, one being thr and one thr%. No need to set up a logic switch.

Next to that, would it also ve possible to forward telemetry data to this second transmitter?

Does anyone have pictures to show where to find this port?

Hello all, I am trying to set up a teacher / trainer system between a Horus and a Taranis X9D. Is it possible to use a XM+ and bind it to the Taranis and then plug the XM+ into the Horus. I found in the OpenTx menu it gives the trainer options: Master Plug, Master Serial and Master Bluetooth. Where ...

If you press and hold the enter key for a while you get a menu. In this menu you select reset telemetry. Then it resets the high to zero.

Does anyone have a picture of where these additional inputs are?

Great tip!!
Used the tool that was already in the sd card with OpenTx 2.2.4

It worked like a charm.
Thanks !

I downloaded this Lua script from the FrSky website.

I will try the one from the OpenTx sd card folder then.

I have recently bought a FrSky Neuron 60 ESC. Now I want to change the BEC voltage because I used HV servos in my glider so I want to set the voltage to 7 Volt. I do not have this Airlink device so I am trying to use the lua script on my Horus X10. I have already updated to OpenTx 2.2.4 to get the b...

Sorry, I didn't fully understand the opening post. If you set up both transmitters in Companion, then I think you can drag and drop a model from one radio to the next in Companion

That will not work as far as I know. To copy models from one transmitter to the next, you need to use Companion.

Companion will convert the data for the format used in the X10s to the format for the X7

Yes check out OpenXsensor.
An Arduino code package to create all different kind of Telemetry modules. Include:
Current
Voltage total and per cell
Altitude
Vertical speed
GPS location
RPM
Acceleration sensors

You can select D8 in the radio setting menu in Companion I think.

I would say stick calibration is only needed when you receive a new Transmitter, or when updating firmware.

I would choose to expand the number of channels. For the price of a receiver or if posdible an Sbus converter you cab hardly make any mechanical changes

Verstuurd vanaf mijn SM-G973F met Tapatalk

Most important in regards to the switch is that when connected to a receiver, even if you try to switch of the transmitter asks for confirmation before even switching off. So no big risk here I think.

Verstuurd vanaf mijn SM-G973F met Tapatalk

It has just been introduced on a new transmitter, no info on updating current transmitters yet. We have to be patient i guess

Verstuurd vanaf mijn SM-G973F met Tapatalk

I found that on my reservoir it does not change much with changing angle

Cool, i did a simular test. Got to the point where I could trigger a led but no connection to FrSky telemetry. Is there a place where I can find your code?

Update time is great now. Very happy with the results.

Have changed the code today.

Update time was very poor.
Around once a second. Now with chanced code its more then 15 times a second.

Will do testflight tomorrow

So you suggest using a compact SBUS receiver connected to the Master transmitter and bound to the Student Transmitter?

I have only tried binding, not used it yet for flying, so no, i haven't noticed any lag

I just tried last weekend.

Used two Horus X10S transmitters.

Set the master to Bluetooth trainer master and then switch off and restart.

Set the second to Bluetooth student. Also switch of end switch back on.

Then in the model menu also check trainer settings

First inflight test with no flight zone warning

https://youtu.be/kybwabBwatA

Thanks for all the help.

I have my first Widget working. There are still some small issues but it works!!!

https://youtu.be/rxGZqBGFMuc

Maybe you need to change the telemetry ID for the vfas value. Perhaps the receiver and the OpenXSensor use the same ID?

I am trying to create the following. I want to display a map of our field on the screen of my FrSky Horus. On top of this image I want to have an Icon of an Airplane showing my location on this map based on GPS data from my plane. So far I managed to get the map image displayed and I can draw lines ...