Search found 1584 matches
- Fri Aug 24, 2018 12:57 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly
You do if you only want to read the "unread" posts.. João I'm not sure if I understand you correctly. Do you say, it is normal to get logged off when you only read the "unread posts" ? :?: If yes, then No, it's not normal. Short time ago, I was at Munich and for a week and I nev...
- Fri Aug 24, 2018 10:12 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
I get logged off for nearly every post that I want to read.
If there are 5 unread postings, I probably have to sign in 4 or 5 times to read them.
And it's even worse when I try to post a comment to a posting. I'm normally logged out 3 or 4 times before the post is on the forum.
Reinhard
If there are 5 unread postings, I probably have to sign in 4 or 5 times to read them.
And it's even worse when I try to post a comment to a posting. I'm normally logged out 3 or 4 times before the post is on the forum.
Reinhard
- Sat Aug 11, 2018 6:13 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
I'm still running on Win XP
Reinhard
But had the problems also on Win10 64 bit
neede two extra log ins to write this post
Reinhard
But had the problems also on Win10 64 bit
neede two extra log ins to write this post
- Sun Aug 05, 2018 10:29 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
I have these problems in the north east of Bavaria, but I had no problems in Munich
Reinhard
3rd try to submit the posting
Reinhard
3rd try to submit the posting
- Sun Aug 05, 2018 11:37 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
even with another notebook (never used before with this forum) with Win10 and Edge browser
Reinhard
Reinhard
- Sat Aug 04, 2018 9:14 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
Still having same problem.
Today, to read 9 new posts, I had to sign in 8 times.
But last week when I was at a distant location, I had no single problem when I was logged on to the forum, no single unintended sign off.
Reinhard
Today, to read 9 new posts, I had to sign in 8 times.
But last week when I was at a distant location, I had no single problem when I was logged on to the forum, no single unintended sign off.
Reinhard
- Fri Jul 20, 2018 9:12 am
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
Glad, that I'm not the only one with that problem.
Today, to read 9 'unread posts' I had to log in seven times.
and one more time to write this post
Reinhard
Today, to read 9 'unread posts' I had to log in seven times.
and one more time to write this post
Reinhard
- Thu Jul 12, 2018 6:12 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
Re: Problem with forum. Repeatedly "signed off"
Thanks for the response, but that doesn't seem to help.
And the problem occurs on two different pcs, one with winXP and Firefox and one with win10 and microsoft edge
Reinhard
And the problem occurs on two different pcs, one with winXP and Firefox and one with win10 and microsoft edge
Reinhard
- Thu Jul 12, 2018 12:56 pm
- Forum: General Information & Rules
- Topic: [Solved] Problem with forum. Repeatedly "signed off"
- Replies: 52
- Views: 49614
[Solved] Problem with forum. Repeatedly "signed off"
Since some days I'm getting signed off repeatedly while reading the forum.
Nearly every time when I try to select the next unread thread or even when I try to get the first unread post of a thread.
I click the "first unread post" and I'm no longer signed in.
Reinhard
Nearly every time when I try to select the next unread thread or even when I try to get the first unread post of a thread.
I click the "first unread post" and I'm no longer signed in.
Reinhard
- Mon Jul 02, 2018 8:15 am
- Forum: ersky9xr
- Topic: Switch arm with DJI Naza M lite
- Replies: 11
- Views: 9614
Re: Switch arm with DJI Naza M lite
Change the logic switch to "v<val"
Reinhard
Reinhard
- Wed May 16, 2018 11:00 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Voice setup for APM 6 Modes with Ail D/R and Aux3 Way Switch
- Replies: 45
- Views: 27081
Re: Voice setup for APM 6 Modes with Ail D/R and Aux3 Way Switch
I verified, that it is working. And it is a really simple setup. Even though I had some problems to get it working. But only due to my faults. You need only one single entry in the "Voice Alert" menu. You only set the Switch field to "Fmd", the Trigger field to "All" an...
- Fri Apr 06, 2018 8:56 am
- Forum: Hardware
- Topic: Replacing Atmega64 with 128
- Replies: 14
- Views: 8511
Re: Replacing Atmega64 with 128
Have a look thereI have searched the forum and didn't find any topic about this,
viewtopic.php?f=95&t=9160&p=118619&hili ... ck#p118619
Reinhard
- Mon Apr 02, 2018 10:41 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Keep breaking XJT modules
- Replies: 10
- Views: 8704
- Mon Apr 02, 2018 8:20 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Keep breaking XJT modules
- Replies: 10
- Views: 8704
Re: Keep breaking XJT modules
This is, what it looked like on my radio.
The picture is a bit misleading as the pins extended 2 mm in reality
Reinhard
The picture is a bit misleading as the pins extended 2 mm in reality
Reinhard
- Sat Mar 31, 2018 10:46 pm
- Forum: Turnigy 9XR PRO radio
- Topic: Keep breaking XJT modules
- Replies: 10
- Views: 8704
Re: Keep breaking XJT modules
Thanks, João
that reminded me to check my radio also (new and not flown up to now), and the contacts extended only about 2 mm.
I resolderd them and pushed them out about 2.5mm more.
Reinhard
that reminded me to check my radio also (new and not flown up to now), and the contacts extended only about 2 mm.
I resolderd them and pushed them out about 2.5mm more.
Reinhard
- Tue Mar 27, 2018 2:36 pm
- Forum: OpenXVario - an open source vario supported by the open source firmwares!!
- Topic: GPS lost communication with Arduino
- Replies: 13
- Views: 10368
Re: GPS lost communication with Arduino
Richard, have a look here in this description of how I did set up a gps module. It shows something about NMEA mode and SIRF mode of a GPS module. http://openrcforums.com/wiki/index.php/Using_a_GPS_mouse_to_get_GPS_data_onto_your_TX_display#Configuring_the_GPS_mouse From there go to Step 8.2 Reinhard
- Sat Mar 24, 2018 9:46 am
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR-Pro Radios from HobbyKing on Sale
- Replies: 29
- Views: 24612
Re: 9XR-Pro Radios from HobbyKing on Sale
I believe, part of the setup problems for beginners could be solved by either, some more available templates or more sample model configurations, available for download into eepe or ersky. And all these models with a detailed description what the mixes do and where to connect which servos / ESCs Rei...
- Thu Mar 22, 2018 3:13 pm
- Forum: Turnigy 9XR PRO radio
- Topic: 9XR-Pro Radios from HobbyKing on Sale
- Replies: 29
- Views: 24612
Re: 9XR-Pro Radios from HobbyKing on Sale
I never found it on Hobbyking at this price (though following the link in their emails). I always get the "out of stock" pages with a price of over 50 or 60 $
Reinhard
It's doable. I did it two weeks ago.I believe it is hard to change Gimbals to Mode 2.
Reinhard
- Mon Mar 05, 2018 7:09 pm
- Forum: Software
- Topic: Unable to check for updates Ubuntu 16.04
- Replies: 19
- Views: 12673
Re: Unable to check for updates Ubuntu 16.04
I had a similar problem some days ago with windows XP where I have an older version of Firefox running. This is the computer I have used up to last week to download the er9x/Ersky9x sourcecode from Github, so I can modify and compile it by myself. All of a sudden, "Github clone" ended with...
- Wed Feb 28, 2018 9:57 pm
- Forum: Hardware
- Topic: TH9X/Turnigy 9x bricked after flashing
- Replies: 30
- Views: 15574
Re: TH9X/Turnigy 9x bricked after flashing
The resistor pulls the level of the reset pin high, charging the capacitor as well (high = no reset condition). To do a reset, the programmer now must pull down the reset pin(20), discharging the capacitor as well. The program checks the reset pin level after a short time. When the programmer is not...
- Wed Feb 28, 2018 9:47 am
- Forum: Hardware
- Topic: TH9X/Turnigy 9x bricked after flashing
- Replies: 30
- Views: 15574
Re: TH9X/Turnigy 9x bricked after flashing
IIRC, a problem with the reset is possible, when the output of the programmer is weak and can not pull down (or up??) the resetpin within a given period of time. Desoldering the capacitor on the reset pin of the processor can help. Try with an even lower communication speed, e.g. parameter -B 9600 (...
- Mon Feb 26, 2018 11:27 am
- Forum: 9Xtreme upgrade board
- Topic: My 9Xtreme Installation
- Replies: 212
- Views: 163500
Re: My 9Xtreme Installation
Thanks for your opinion.
So nothing really against it.
So, yes, I know that this radio is short of, but I saw one seller with a rather good price.
Reinhard
So nothing really against it.
So, yes, I know that this radio is short of, but I saw one seller with a rather good price.
Reinhard
- Mon Feb 26, 2018 8:41 am
- Forum: 9Xtreme upgrade board
- Topic: My 9Xtreme Installation
- Replies: 212
- Views: 163500
Re: My 9Xtreme Installation
Just because here is a discussion about the different tx's, what about the 9xr Pro ? I'm thinking of getting a 9xR Pro because I like Ersky more than ER9x, due to it's expanded capabilities. And Ar9x(uni) is no more available. But I do not really like the look of this tx. Can I convert a mode 2 into...
- Sat Jan 27, 2018 3:46 pm
- Forum: erskyTx (was ersky9x)
- Topic: Ersky9x Bug Reporting
- Replies: 416
- Views: 344038
Re: Ersky9x Bug Reporting
Thanks
Reinhard
Reinhard
- Sat Jan 27, 2018 10:10 am
- Forum: erskyTx (was ersky9x)
- Topic: Ersky9x Bug Reporting
- Replies: 416
- Views: 344038
Re: Ersky9x Bug Reporting
There is a small flaw in the "Edit Mix" menu. While all field names are displayed in mixed case, the name for the flight modes is displayed in upper case as "MODES" (Er9x as well) The call in menuProcMixOne contains a literal string "MODES" instead of the defined 'varia...
- Sun Jan 21, 2018 10:35 pm
- Forum: Hardware Mods
- Topic: Another two modules thread. 2.0
- Replies: 83
- Views: 53011
Re: Another two modules thread. 2.0
collect2.exe: error: ld returned 1 exit status exit status 1 I had the same problem that occurred by simply adding or removing a line of code or even a comment. There obviously is a well known, but never resolved problem in the linker in, at least, arduino 1.8.0 . You may try the following (it did ...
- Sat Jan 20, 2018 10:06 am
- Forum: Feedback
- Topic: DDOS filtering
- Replies: 20
- Views: 23671
Re: DDOS filtering
Problems came back short time after. Three PCs had same symptoms, one over wireless LAN and the other two via wired LAN. All of a sudden, I couldn't even send or receive emails. Internet provider found out, that (without any informations to the users) they had shut off some protocols, mainly used by...
- Thu Jan 18, 2018 4:00 pm
- Forum: openTx
- Topic: Custom Build Taranis X7 help
- Replies: 15
- Views: 7357
Re: Custom Build Taranis X7 help
On my pc (Win XP) python is installed in c:\python27 and is included in the path variable as very first entries.
PATH=C:\Python27;C:\Python27\Lib\site-packages\PyQt4;
Reinhard
PATH=C:\Python27;C:\Python27\Lib\site-packages\PyQt4;
Reinhard
- Sat Jan 13, 2018 5:44 pm
- Forum: Feedback
- Topic: DDOS filtering
- Replies: 20
- Views: 23671
Re: DDOS filtering
Thanks Kilrah,
that seems to have cured my problem.
Reinhard
that seems to have cured my problem.
Reinhard
- Sat Jan 13, 2018 10:02 am
- Forum: Feedback
- Topic: DDOS filtering
- Replies: 20
- Views: 23671
Re: DDOS filtering
Since a few days, I frequently have to sign in again when, from "Quicklinks" - "unread posts" - via selecting a thread (and sometimes when I click on the "first unread post") because my signed in status with my name displayed in the upper right corner suddenly changes t...