openrcforums

Hy, some problem with a 9XR-Pro with no ext Modul in the socket TX starts and stops with the Power switch allways ok with a Flysky-modul sometimes at switch ON it hangs at start and sometimes it hangs at swicht OFF at this situation the LCD ist not quit bright After 2 or 3 trials it starts well and ...

Hy Julez, here the calculation: Die Telemetrie Umrechnungen zum Anzeigewert laufen immer so: In Abhängigkeit ob und was man in Ratio einträgt gilt: Entweder Ratio ist "-" dann wird so gerechnet: (Wert geteilt durch 10) [( Telemtriewert / 10 ) ] + Offset = Anzeigewert Beispiel: [(1000/10) ]...

Hy,

it's a XJT and some X8R, X6R Receiver with a S-Port

how get to work Telemetry direct to X9RPro with a openTx V2.12

Hy, first: Same Problem XJT-Modul at 9XRPro but with openTx V2.12 how to get the XJT with Telemetry at LCD working with 9XRPro second: and I have Flysky HF-Mdule with PPM too Protokoll: 8 ch 22,5m 300us + so I need to select both Protokolls for XJT D16 D8 and for PPM but there are not both XJT and P...

Hy, at new Telemetry openTxV2.12 Calculate: Multiply Telemetryvalue * Fixvalue I need to calculate a Telemetryvalue with a fix Value Range should be from 1000 to 0,001 Because have a Telemetry-Value in cm but I need in m Example: Value is 12478,5 cm * 0,01 = 124,7m multiply is only with other teleme...

Hy Upper display is normally for a quick look at the flight. But outside at the sun you see absolut NOTHING at the upper Display. we need no blandish, its unreadable and its unusable! Did nobody from FrSky test it outside at the sun? Lower B/W LCD is fine at the sun. I fear same will happen with Hor...

Hy

have replaced the orignal Elko 100uF/63V with a 470uF/25V at the same Place, no problem.
Cut the wires of the original direct at the Elko, sold on there the new one

RTC Battery CR1220 had 3,08V so I did't change it

Hy,

now you have to "calculate" single cells

Hy, looks like there is a hardware bug round the RTC Battery and the charger of the flight battery the RTC battery is a CR1220 (its under the NiMH flight battery holder) if its new, it should be about 3,1 to 3,2V, should be changed if lower as 2.9V And there must be a 100uF / ??V it should be change...

Hy,

what's this at companion V2.11

Disable multi sensor Handling

akivate or not aktivate?

For two or more same sensors?

sorry,
no expo stet,
no dualrate set,
no diff set.

this cant run

programm expo and dualrate at inputs for ele and ail sticks
programm diff at mixers for both ail rudder
add at mixers the flightmode you need

Hy,

X9E
the upper Color Display ist unreadable outside
so its Nonsens, unusable, only a gimik
Change it to a B/W LCD if you need one

Hy,

X9E
Fader/Slider S1, S2 in the mid are to short
and at about 80% of the too short way they have their max Value

thats a big miss!

Compare with the fader at a Graupner that what we need as a Fader!

hy,

Thank you both,

Looks fine! will buy an external XJT-Modul too

Hy Kilrah,

Internal XJT has no Dip Switch, only per openTx Software OFF

I want to have the Telemetrydata from external XJT-Modul direct at Taranis

Is this possibel ?

Hy, question and Problem: openTx V2.017 and openTx V2.11 I have a X9D Taranis Plus with intern XJT Modul and an extern XJT-Modul intern XJT-Modul ist switched OFF (at openTx software) extern XJT-Modul is ON and aktiv (at Dipswitch) X8R with Telemetrie Sensoren, Bind to extern XJT-Modul Is it possibl...

Hy, dont forget to set the weight at the new heli swashplate menue! At openTx V2.017 you had to set it at mixers At openTx V2.11 now you have to set the weight direct at swashplate menu normal servo direction 0 to +100% reverse servo direction 0 to -100% for test set roll and nick to +/-71% thats al...

OpenTx V211 Date 29.07.2015 Tx Settings: Can select Bluetooth but now not longer serielle Port options, Please test it Cant select for S1, S2 a name and function All others, F1,F2,F3,F4, LS, RS are ok name and function setting possible, please test it english and german software tested, both the sam...

Hy,

X9E, 1 week old.
After 1-2 days Tx OFF the RTC Realtime clock lost Date and Time

I there a RTC Battery at the Board

were, how to test and change it

moved to openTx software for X9E

Hy Klirah, not a Problem with new Modells only at a modell transfer from X9D to X9E Mixer or Inputs changed from X9D topside S1, S2 to X9E Fader midside S1 S2 same Names but other Positions. Problem was coused from Frsky, not from openTx! Frsky have changend the names and the positions of Slider and...

Hy, what does Frsky here with the X9E? At X9D Taranis I have: Potis Topside S1,S2, S3 Side Slader LS, RS At the X9E I have: PotisTopside F1, F2, Side Slader LS, RS Mid Fader S1, S2 Spare F3, F4 When we transfer a ready running Modell (V217, openTX V211) from X9DTaranis to X9E Potis at Inputs and Mix...

Hy,

here it is.

http://downloads-21.open-tx.org/nightly ... n/?C=M;O=D

Hy, Stand 25.07. 2015 Rev 098 von open9x r2940 bis openTx V2.11 Update auf OpenTx V2.10 und Companion V2.10 Korrekturen, Details, Erweiterungen und Beispiel Alle neuen Funktionen der OpenTx V2.10 die neue Telemetrie der openTx V2 10 mit Beispielen der Maintenance Mode von Mike Blandfort der Pultsend...

hy,
Update your companion to V2.11
download openTX V2.11 for 9XE
copy this to the SD Card /FIRMWARES

start Bootloader and flash this file

Dont use simple divide or mulitply the cells pack
You can get real single cells direct , use calculated-funktion

Because 1 cell could be very bad and you don´t notice it.

Hy,,

the wizard is a LUA script

Hy, since ETSI V1.8.1. some People told me that they have problems with some flightcontrollers, with S-Bus to PWM Converters with S-Bus Servos not all channels work fine with S-Bus and with max RX- Range when they flash back to ETSI V1.7.1 all the Problems are gone what the hell did Frsky change at ...

Hy, you can calculate it exact use MAX as mixer source (MAX is +100%) us the 3 pos switch as Switch in the mixer to selcet one of 3 mixer lines calulation is simple Weight calculation: from -100% to 0% to +100% is 200% spann from 1000us to 1500us to 2000us is 1000us spann (exact 988µs to 2012µs) 100...

Hy, have found a solution with the new telemetry at openTx V2.1 take RSSI sensor, recalculate it from 0 - 100 to 0 - 20 because Vario has only a range from-17 to +17 recalculation factor is 50.0 (intern 100 is 1000 so 1000/50 = 20) take this RSSI a source for Vario aktivate this "vario" at...