openrcforums

Getting closer - verified that the image displayed just now after the restart in this comment below, did nothing else except a power-cycle from the Custom Telemetry display page (the one you see during flying) and did a power-cycle. The plane image was gone when I re-started from cold, replaced by '...

After my last restart due to the 'snow', the image box had lost the image and had 'No Image' back again. I re-selected the image name (already in the setup page) and the image returned. I'll keep trying to nail it down.

While scrolling fast through a list of .wav files, I notice that (and it seems to be more prevalent the faster I scroll the wheel), there is a cursor (underscore line) flashing at various places all over the screen. Then, I eventually get a video 'snow' job - see attached.

Sorry - I retract this comment - it was probably me, trying to get started using the delay I had learned while there was a delay issue. The STARTING is fine now, as fast as normal. I guess you returned it to the way of earlier this week. P.S. Still tricky to get started:( Will try a few 'moving arou...

I just now got a video restart while scrolling quickly through a list of model audio file names - I checked the BOOT REASON screen -- WATCHDOG!

I was scrolling through a list of model name .wav files and my screen got the 'snow lines' effect - see attached photo. A restart of the radio is required to remove it. Still trying to replicate 'lost image' effect and/or video restart. Will try a few 'moving around things now, trying to be observan...

P.S. Still tricky to get started:(

ozphoenix wrote: ↑Fri Mar 01, 2019 10:53 pm Will try a few 'moving around things now, trying to be observant, and get back to you in the next 30 minutes or less.

MikeB wrote: ↑Fri Mar 01, 2019 10:35 pm Just edited my post above!

Mike

Will try a few 'moving around things now, trying to be observant, and get back to you in the next 30 minutes or less.

MikeB wrote: ↑Fri Mar 01, 2019 10:35 pm Just edited my post above!

Mike

Cluster size is 32. SD card is new this week, 32GB SANDISK ULTRA HC1 Class 10 high-speed. What is your "cluster size" on the SD card? I'll investigate the image problem, mine stays present all the time. It is supposed to be read in memory and put on the display image in memory once, then o...

Just a quick note: 1. I still get a video restart if I am scrolling a list with the thumbwheel. 2. The model image does not persist, even though the image file name is still in the correct position on the menu page - it disappears when I move between menu pages ('No Image' words are re-inserted) and...

Got it - thanks - will work with it this morning and report back.
regards,
ozphoenix

MikeB wrote: ↑Fri Mar 01, 2019 7:16 pm I've posted an update with a couple of fixes/changes in.

Mike

Ok, thanks for those tips. All packed away for today, already - will look first thing in the morning.
Regards,
Ozphoenix

Mike, This happened again several times today - I think it was exclusively when I was using the scroll wheel to run down a list of files (for example, such things as model selection choices on Model Select page) but the screen I was on and the field I was selecting for varied (several different ones...

Hi Mike, In the latest test version of eepskye, I cannot explicitly select the X12S in the 'Version to Download' dropdown. Which version of eepskye supports X12S? Is there an alternative selection to use in that list? EDIT: Think I just saw the answer in one of your recent posts - still to get a ver...

My chip and spare arrived yesterday - hopefully, I can pass them along to my clubmate to make the change in the next week. Will give feedback on the success or failure, once that is done. Found some chips (locally in Oz -1 week by post), found a local clubmate who can do the work - will see how it t...

Ok, thanks, Mike - must be getting late there - if you post an interim version, I can continue to make some observations during the day(night for you). But, I think it might be too late already for that. If it's already getting too late, I can continue with the current test version and just work aro...

Hi Mike, On my X12S radio, r222d4 - any model, go to Model Setup, General, go to Thr. Default, press PgUp (Menu) 3 times, look at the Model Image box on the display - flickering like crazy. Second time you do that sequence, image box disappears completely. Also, after each third PgUp, there is a fli...

No prob - back online now but figured it was getting late there - will look forward to any progress in your next session - for now, I can work with it as it is (software selected volume knob is working), get on with other things and see where it goes from here. As for the starting up issue, if I per...

Hi Mike, Firstly, some general feedback from yesterday (not just related to the 'audio' test version) - the model image file display is not consistent across a power-cycle - sometimes the selected image will re-appear correctly in the image box after a power-cycle, sometimes not (says 'No Image' ins...

Hmm, interesting - I wonder what they also do differently in OpenTX to prevent the 'hiss'(?!?!) Yes, of course, happy to test whatever you offer :) My hearing is gradually getting worse, from years of sticky my head in the back of large-scale computer racks, but this hiss I can hear (or not, if you ...

Thanks, Mike - agreed, that image now works. Strange, because I believe that I used Paint3D to create the original .bmp file, but maybe I didn't. Anyway, thanks again - now, I'm on to other things. regards, ozphoenix The image file showed it was of type "BMS" internally. I loaded it into &...

Thanks, Mike - everything put away for the night now - will look at these again early tomorrow. Regards, ozphoenix The image file showed it was of type "BMS" internally. I loaded it into "Paint 3D" and re-saved it as type "BMP", now it displays OK. Here is the modified ...

Mike, 1. I'd agree, but for completeness and clarity, including it might be worthwhile(??) and simple(?) 2. ok 3. ok 4. Software Vol. is already ticked in the Hardware menu :o next idea? 5. yes, please - I re-confirmed it with a re-flash to Ersky9x - still hissing (softly, but definitely there and n...

Mike, I created a .bmp (attached as smalltig.zip, but actually it is smalltig.bmp) that I think meets the specs (not sure if it complies with the 24 bit colour requirement). It is a picture of a Tiger Moth, 'centred' in the 128x64 pix box. On the display, the image is 'wrapped' off to the right by a...

Mike, Correction to Item 4, above - I do get a switch warning screen if the 'F' switch is in the 'enabled' (forward) position, but only if the 'arrow' for 'F' in the rectangular box is shown as default forward, which is wrong. And, the detection of the switch's position is still reversed (but only t...

Mike, Just a couple of updates. Regarding item 5, above - I re-flashed to OpenTX and rebooted - there is no hiss coming from the speakers when using OpenTX. Something in Ersky9x, quite possibly related to the screen updates, is causing a static/hiss from the speakers. Also, on one occasion today, th...

Mike, Just some early feedback on r222d4 for X12S (not wish list enhancements, just feedback): 1. On the Model Setup, General screen - you only show 7 switches, the X12S has 8 2. On the Model Setup, General screen - for switch test positions (in the rectangular box) most of the switch positions 'sen...

Hi Mike, Ok, thanks for this feedback - have now downloaded d4 - I have to be out and about for a few hours this morning, so will not get to try it until later today (our time), but I'll do that and post feedback. Also, given that I don't see many people commenting on X12S in this thread yet, I'm ha...

Hi Mike, That got it! Using my QX7 SD card for folder structure and dfu to re-flash, I now have the brightness up, screen displaying - but, the image is very small and compressed and produces the normal Ersky9x info in the top half of the screen - the bottom half is black except for a box in the upp...

Hi Mike, Re: X12S with Ersky9x r222d3 Well, one step forward but two steps back (kind of). 1. I got a new SD, formatted it, downloaded Zadig and DFU, got the STM32 BOOTLOADER driver working. 2. See the attached .pdf file for a copy of my PC screen during the following: a. Ran dfu (as below) to read ...