openrcforums

Thanks for answering the way you did. Had no idea there were that many hours in it. Great info, being a novice at this, it's good to know about the top end stuff too. Not that I will ever use it, but , that whole last part is common sense based compelling argument against half of the people that giv...

I'm ummmm speechless.... wow thats a lot of receivers and batteries.!

Where is your posts again for the dsm stuff, I got some soldering to do, no way I'm payin that.! wow

Some sniffers out there who knows what i´m talking about Yup, I'm one of those sniffers I guess, that know what your talking about,,,I compiled a list of links for someone a while ago, all from the rcgroups site of custom cases for the 9x inards... some of them were what we call "tray" ty...

Can you post a link leo?

wasn't interested in the Turnigy stuff until he heard it supports the BNF models? OK, here's the potential problem for that, its in the quote. B...N....F now I can see those that have tinkered for a while, and just want a quick little yard flyer, and know how to mod. BUT a majoritiy of the BNF mark...

Wow, ok I'm gonna save all the Thank You's and just get straight to the point. Erazz, and others, have done alot of really brilliant work, for the love of the hobby, and the continuation of others enjoyment. Click the link below and send him a couple bucks! I would'nt ask if I didnt already do it.! ...

Dean, big salute for playing with eepe while you wait for the radio.... your gonna be miles ahead of others that don't.

AND I'm glad you asked that question.... I can't wait for the answer. I've been wondering the same thing.


Pat

Actually that s the Detroit Red Wings logo , the NHL hockey team Mojo, Ha, of course he knew that, we are neighbors after all, we can both feel sympathy for him because he is a leafs fan. I do know his pain though, just check the early 80's wings record. Use to be fans with bags on their heads in t...

awesome plane, and manuverability.!

Do we need to buy you some velcro for your cam to put it on a hat for you or what??? Duct tape will work.

JK


Really cool plane.

Pat

Yes, I just grabbed and loaded 677 last night.... Noticed the new line, wasnt sure what it was,,,, so I left it alone, with the knob scrolling enabled, I can get the cursor over to the R and it blinks, but cant get anything to change or select.

SP board on board.

Leo, thanks alot. As goofy and immature as it sounds... my pals are gonna love this.

Pat

Fitting a Spektrum DM9 module to the 9x poses some problems because the pins on the 9x a re slightly shorter than those on a real JR transmitter Hi Nigel, I got the impression they were not refering to the plastic snap in part of the module... just hacking the PCB or brain from inside the module an...

http://www.rcsoaringdigest.com/pdfs/RCSD-2011/RCSD-2011-0708.pdf I don't know if you saw this when I posted it a while back.... or it was originally from the rcg thread. I cant take credit, I copied it from there. Great article author written as a first time modifier of the 9x to flash it with er9x....

Receivers are affordable.

Hi erazz, Pmac just came up with a great idea, after helping us out with an eepe question. How difficult would it be to change the color of the output sliders based on how they are moving, as real channel or virtual? Galand had a mix on 7 or 8 and only had 6ch on the output set up on the model setup...

virtual..... of course.! Wow different color, erazz should get on that......whats the over/under on how many people will ask why there a different color if he doesnt provide a key.!

I think it can be selected becuase certain setups, it allows for spacing between channels, if you need to run some channel travel over 100%. Some one else can explain that better probably.

Rob do you know why the protocol options allow for a number of channels?

Pat

sweet I'm changing my signature now to :

Even a blind pig gets an accorn every now and then.!

Glad that worked.

Maybe as erazz about that issue in eepe. I think consistency there would be good.

Pat

+1 thanks.

10 lines down on the model menu screen 2/10, there is a selection for how many channels. Is that at 8 on that model, or is it only set to 6 or 4 for some reason? Would that do it??

As you might already know. The 9958 already has a flysky based receiver board. Go to the 9958 site http://www.rcgroups.com/forums/showthread.php?t=1536792 to see directions for binding your 9x to it. The other models, if I'm not mistaken have a different 2.4 protocol which has not been developed yet...

I have a stock turnigy 9x V2 and cant figure out how to use it on Clearview, Please help

Do you have a mono phono plug to usb? or serial for connection to your pc?? And did you try it with the module unplugged from the back of the radio??

I have a stock turnigy 9x V2 and cant figure out how to use it on Clearview, Please help

If you still have stock firmware, maybe they can help you with better advise here. Give it a try.

http://www.rcgroups.com/forums/showthre ... 5&page=496

I'm a little surprised there are only 233 memebers here. Does that sound about right? Alot of the discussion is pretty heavy on the technical side, but I really thought given stevens number in about a year he sold about 1000 solderless prog. boards? Do you think that means that a majority of 9x user...

Can you explain what you mean by cogging? is this a regional term? Do you mean they flucuate rapidly or twitch??

Thanks.

Pat

Thank you very much. Hope you feel better.

GO WINGS!!

pat

I guess if you have time, do you think you could black and white the winged wheel, and Post it back up. I can convert it to the bmp. Thanks.

Pat

Show, very sorry to hear, that. Been there a couple times, nice to visit, but I don't think I could get used to living there. I could easily see why the ceiling is a problem. I sure would like to see them look up that law though (its really just the law of "those who have the guns and badges ma...

see what you can do with this. If it come back as a maple leaf, I call shinanigans.!

Leo, is there a simple way to convert a red and white image into a black and white one? what about a regular photo. I have an old version of photoshp elements, but its on a desk top that is older than your slow machine... so I really don't want to wait 20 minutes for photo shop to load.! Thanks. You...