openrcforums

Perfect, thank you Brent.

Hi, I can imagine that software developers should have a schematic for this radio board protected by a NDA, but, now that this radio has been (officially ?) discontinued, is there a (legal and agreed with the owners) way to post it here? That will make the maintenance of those radios much easier. Or...

............................. Thirty minutes later and I've tried to install eepskye and eepe on my Linux Mint 18.3 machine. Both failed due to missing dependencies, specifically libqt4-gui. A few minutes with Google told me this package has been deprecated, and replaced with a bunch of other qt4 p...

Your speaker does not seem to be the culprit. If you hear some hum and not a lot, your wiring is presumably good too. Your radio failed indoor, so cold should not be the problem. Probably not the issue, but what software are you running? Sometimes, weird things disappear with a simple software updat...

Thank you Mike,

eepskye 422 now installs and works flawlessly.

Just a cosmetic minor detail, the Debian installer continues to present eepskye as 417-1. Doesn't bother at all.
Miguel

Help/About shows:
Revision: 421, Feb 18 2018

Miguel

The Linux version of eepskye 422 does not seem to install from the link in er9x.com in a Debian based Linux Mint Instead, 421 is re-installed. (417-1 announced on the Details tab of the installer screen (?)) When run, it informs about the existence of the new release 422. Am I missing something, or,...

Headphones output works ?

Miguel

Hi

Latest versions from g5 on, are not under "ersky9x >ersky9x and eepskye test versions" link.

go to:

er9x.com >Ersky9x Test Versions (zipped)
r221g5
r221g6

Miguel

No need to compile at home, find the builds for test versions here:

http://web.openrcforums.com/forum/viewt ... 3ac59c010d

Miguel

Hi,

Courtesy of MikeB, this feature is already implemented and working.

Dowload the latest release of eepskye from here:

http://web.openrcforums.com/forum/viewt ... de8c86df7d

Hi gents,

That was fast, thank you. Just downloaded and installed, working perfectly.

The installer says that the version is already installed, but shows a re-install button that makes it work.

Thanks again
Miguel

Hi Mike,

It is only today that I realize that eepsky is being updated on the test version thread, so, better late than never, thank You so much for the mod, works a treat and helps a lot in understanding mixes on "complex" models.

Keep up the good work,
Miguel

Thanks Joao, I'm new to eepskye. I will follow your recommendation, but, even if I have a machine running Windows, I try to avoid it if I can. Do you know if eepskye for Linux has been updated of discontinued? Miguel Edited to add: Just downloaded the last version for Windows that works perfectly. T...

Hi, I am finding a problem with the protocol settings in the import of eeprom to file. For all models, the protocol is multi, but the files read with eepskye (In both Linux and Windows) show different results. Am I doing something wrong ? Radio is a 9XR-PRO running ersky9x-pf 4r 221 (05-11-2017) MOD...

Hi, I checked on eepskye and all goes as expected. I also have recovered the file to my radio, overwriting the previous model, and the problem has stopped. I cannot reproduce it anymore. Go figure. :roll: Thanks for your time and empathy. Miguel PS, the maiden flight of the model went like a breeze.

Hi, There you are, thanks for your help. Model is an electro ASW 28, with four servos wing. Will be flown tomorrow for the first time if wind allows. Please note that in the attached file, I have already changed offset on CH2 to 7, because that is what seems to work. Also "Use Output" is c...

Hi, The second line is not selected in the "Normal" mode. It is not shown in bold in the picture, and is not selected directly by a switch, but by a flight mode. Anyway, the curve takes care of reducing crow up to the middle position of the throttle stick, and start throttle from center up...

Hi Joao, Agreed that it should, but for some reason it does not. Trims are centered. On the last photo, throttle is full down. Channel order is AETR. Source for CH2 is taken from CH3, since the throttle stick behaves differently in normal mode and landing (crow) mode, but that should not affect the ...

Hi, I'm setting up a model that requires elevator compensation when throttle is applied. If I set a value of weight of 5, and an offset of 5, the output value varies from -2 to 8 instead of 0 to 10 (?) For having no compensation when throttle value is -100, I need to set a weight of 5 and a offset o...

Hi Mike, Yes, and maybe only for lines that have modes (and not all) selected. In this way, simple models stay simple and easy to understand and complex models have a valuable info. Understanding that asking is way easier than writing code, mode names will be even better. CH5: +100% P2 +5%Rud FM(LAU...

Hi,

I think it will be useful to see fligh modes on the mixer screen, to show in each line what modes are affected.

That will make modes easier to program and understand.

If possible.

Best,
Miguel

Thanks Mike,

Anyway, the hardware option (flip the radio) is always available, and easy enough.

Good night, I have fitted the parts of a 9XR-PRO in a different box, and needed to select the option "Rotate screen". Everything works, but the Bootloader screen and the label "Hardware menu Enabled" seem to have a mind of its own. Wonderful piece of software by the way. IMG_2017...

I just realized that the option that I use for total flight time is THt, (not available on ersky9x) and not THs, that, as you posted, has a similar behaviour on both softs.

Hi Mike, On another radio with an ATMega2560, I am using OpenAVRc, https://github.com/Ingwie/OpenAVRc_Dev ,forked from Opentx, and thought that the operation was the same, sorry for the misinformation. If I understand right, I can have timer1 more closely related to actual power consumption using TH...

Thanks Joäo for the explanation and the workaround. I understand that THs gives the total time that the throttle has not been full down, but I miss to understand the interest of the number. TH% seems to give a better explanation of the throttle usage. When I fly electric thermal gliders, I like to h...

Hi all, I am starting to set up a 9XR-PRO with ersky9x-r220, and I find that using THs as triggerA and "---" as triggerB, starts the timer when the throttle stick is pushed from -100% as expected, but stops when throttle is moved down to -100%. Then it resumes counting when again the stick...

Hi all, First things first, many thanks to Caffeine for this very useful tool. Just to let you know that even if the English version of Ivona has stopped to work, the Spanish version (and maybe other languages) is still running. I will appreciate (unless it costs you $ or burden), if you maintain Iv...

Good morning, Just in case somebody finds the same problem, I found the solution. avrdude version 6.0 and 6.1 does not seem to work on my system Linux 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08) x86_64 GNU/Linux I have installed avrdude: Version 5.11.1, compiled on Oct 30 2011 and every...