Search found 198 matches

by skylark
Wed Apr 24, 2013 4:00 pm
Forum: erskyTx (was ersky9x)
Topic: Spontaneous reboot while flying and hanging shutdown issues
Replies: 214
Views: 87733

Re: Spontaneous reboot while flying and hanging shutdown iss

Skylark...is your RTC enabled on your B version board? How long have you been using the rev3 board with co processor 04 on it? I was having the same issues with the seconds not going past 59. It looks like Friday I will be able to fly, I'll keep it running untill then. Yes the rtc is working perfec...
by skylark
Wed Apr 24, 2013 3:52 pm
Forum: erskyTx (was ersky9x)
Topic: Spontaneous reboot while flying and hanging shutdown issues
Replies: 214
Views: 87733

Re: Spontaneous reboot while flying and hanging shutdown iss

Yes When trying to reset the time. I always set the hours and minutes then reset the seconds to zero aka "00". As it is now I cannot reset seconds to zero. It stops on "59". Try as I may I cannot change it. I have actually wrestled with the problem and watch for that dodgy re-boo...
by skylark
Wed Apr 24, 2013 2:44 pm
Forum: erskyTx (was ersky9x)
Topic: Spontaneous reboot while flying and hanging shutdown issues
Replies: 214
Views: 87733

Re: Spontaneous reboot while flying and hanging shutdown iss

Mike, I don't know if this is significant. I am on rev3 board, running ersky9x r-165, co-prp 04, rtc keeps freezing. Tried re-setting. Can change digits but cannot re-set time absolute. One thing I noticed, I can change, hour, minutes but cannot change seconds beyond 59. In other words cannot reset ...
by skylark
Fri Apr 19, 2013 2:48 pm
Forum: eepSKYe
Topic: eepSKYe
Replies: 711
Views: 378517

Re: eepSKYe

I'm not sure how curve/differential is supposed to work. When I edit a mix in eepSkye, it defaults to curve (). This seems to do strange things to the mix. Also I could set curve(curve10) but when hit OK. The mix shows curve. And nothing more. Curve (curve9) worked as expected. I can't seem to use ...
by skylark
Mon Mar 25, 2013 1:28 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

[quote="Reacher10"]I could not figure out how to get 9 thru 16 to show up on th ain screen.

Hi, Here is the link.

http://ersky9x.googlecode.com/svn/trunk/ersky9x_rom.bin

If that fails here is the file downloaded with eePskye. Flashed in my radio OK. Good luck.
by skylark
Sun Mar 24, 2013 12:01 am
Forum: erskyTx (was ersky9x)
Topic: Sam-ba_2.12 on Windows 8 ?
Replies: 3
Views: 3966

Sam-ba_2.12 on Windows 8 ?

Hi Guys !, Has anyone got sam-ba_2.12 working on windows 8. It works well with C9x and also with (eePskye/eepe) combination on windows 7 giving good results. I think it would be nice to get it working for real on windows 8. It reads 95% of eeprom then exits on code 1 error. Any ideas please.
by skylark
Thu Mar 21, 2013 11:32 pm
Forum: erskyTx (was ersky9x)
Topic: Sam-ba: Problems, problems, problems.
Replies: 5
Views: 4571

Re: Sam-ba: Problems, problems, problems.

Are you doing that? http://www.fotoclubinc.com/blog/how-to-disable-driver-signature-enforcement-to-allow-installation-of-windows-7-printer-drivers-on-windows-8/ Yes I did that, but to my shame I was missing a vital step. Thanks for pushing me in the right direction. Finally got sam-ba_2.11 working....
by skylark
Thu Mar 21, 2013 8:19 pm
Forum: erskyTx (was ersky9x)
Topic: Sam-ba: Problems, problems, problems.
Replies: 5
Views: 4571

Re: Sam-ba: Problems, problems, problems.

Kilrah wrote:If the driver is unsigned you need to boot in the special mode that allows installing unsigned drivers... PITA.
Kilrah, Must be a problem with my install cannot seem to invoke that mode. Any other suggestions ? (saving me having to re-install Windows), again. Stan.
by skylark
Thu Mar 21, 2013 7:13 pm
Forum: erskyTx (was ersky9x)
Topic: Sam-ba: Problems, problems, problems.
Replies: 5
Views: 4571

Re: Sam-ba: Problems, problems, problems.

Kilrah wrote:If the driver is unsigned you need to boot in the special mode that allows installing unsigned drivers... PITA.

Thanks Kilrah, I will try that now. Cheers Stan.
by skylark
Thu Mar 21, 2013 7:04 pm
Forum: erskyTx (was ersky9x)
Topic: Sam-ba: Problems, problems, problems.
Replies: 5
Views: 4571

Sam-ba: Problems, problems, problems.

Hi Guys, System crash, had to do a fresh install on Windows 8. now I cannot install Sam-ba driver however much I try. H E L P. I have tried both Sam-ba_2.11 and 2.12. Is there a patch or applet I am missing? . Thanks in advance. Stan.
by skylark
Wed Mar 06, 2013 7:09 pm
Forum: eepSKYe
Topic: eepSKYe
Replies: 711
Views: 378517

Re: eepSKYe

Hi Mike, I installed eepe and paste eepskye. I am sing sam-ba_2.11. my existing models files seem to be mirrored in the simulator. Maybe I am doing something wrong. I have posted my models files below. I know you are quite busy, so Could you have a look at them when you have some spare time. Thanks ...
by skylark
Sat Feb 16, 2013 11:49 pm
Forum: erskyTx (was ersky9x)
Topic: USB Connection Failing between Sky9x board and Win7 computer
Replies: 21
Views: 15025

Re: USB Connection Failing between Sky9x board and Win7 comp

I will have to check out this Install tcl_lib file . I am not sure I saw this part. I remember reading some thing some where about it, I think. But may have not been clear and where one would find it. I do not know what this file is and why. I will have to check out. Thank You for the info. Hey, tr...
by skylark
Sat Feb 16, 2013 8:28 pm
Forum: erskyTx (was ersky9x)
Topic: USB Connection Failing between Sky9x board and Win7 computer
Replies: 21
Views: 15025

Re: USB Connection Failing between Sky9x board and Win7 comp

Hi bob195558, I am using win7 with sam-ba_2.12. try this. (1) Download and install samba_2.12. (2) Instll the patch. (3) Install tcl_lib file. (4) Connect your radio to the computer, Switch on radio, then run sam-ba. (5) Now select your board (At91sam 3s4-9x) from within the dropdown panel in sam-ba...
by skylark
Mon Feb 04, 2013 11:54 pm
Forum: companion9x
Topic: Invalid binary EEPROM File
Replies: 30
Views: 14702

Re: Invalid binary EEPROM File

Cannot read TX Eeprom file. I get the following: Invalid binary EEPROM File C:/Users/Dean/AppData/Local/Temp/temp.bin and other errors, see attached. Running Windows 8 with driver sig off mode. Drive info is not digitally signed to work in Windows 8 in normal mode. Running Companion9x Ver. 1692 Ple...
by skylark
Sun Feb 03, 2013 10:58 pm
Forum: companion9x
Topic: Companion9x v1.14
Replies: 33
Views: 14816

Re: Companion9x v1.14

Bertrand, Great update/revision. There is only one word for it "Marvellous". I tried it on both Rev B and Rev 3 boards. Great so far. I also took a dive in at the deep end and boldly installed sam-ba_2.12 and it all came together, working fine: flashing, saving, reading and editing both ne...
by skylark
Mon Jan 28, 2013 12:19 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

OK Guys, Back on track. Finally got r149 flashed. Thanks Mike and Kaos.
Stan.
by skylark
Sun Jan 27, 2013 9:30 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

Skylark: I just download and updated to r149 without problem. I am also using win7 64 bit. what I do is down load through C9x to a folder. then upload to tx also through c9x 'without' backup/rewrite eeprom. I found this will consistent do it correctly. Make sure you back up your models with samba. ...
by skylark
Sun Jan 27, 2013 7:51 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

I can only ask, are you absolutly sure you are flashing the correct file? If necessary, try downloading the file by hand, flashing it. Mike. I did mannualy download the file as well and tried it. I got it from here:- http://ersky9x.googlecode.com/svn/trunk/ersky9x_rom.bin I will try later with a an...
by skylark
Sun Jan 27, 2013 7:10 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

As far as I can see it is there OK. I've just gone through that process, using C9X V1.13, and it updated fine. I only fixed a minor bug to do with moving models in the modelselect screen. Mike. Yes, it is there alright. I am also using c9x V1.13 and it does go through the normal motion of flashing ...
by skylark
Sun Jan 27, 2013 3:38 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

Hi Mike, I think I've missed the plot. Was r144 the last valid release of ersky9x ?. Kaos reported downloading and flashing r148 successfully. It did not work for me. I thought then it was that old stamp problem again so I let it ride. However last niht r149 appeared. I downloaded it companion9x wen...
by skylark
Thu Jan 24, 2013 8:39 am
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4092
Views: 1622815

Re: Audio (voice) - Stock 9X PCB

Congratulations Pino. You've made it at last. Well done.
Stan.
by skylark
Sat Jan 19, 2013 11:05 am
Forum: companion9x
Topic: Companion 9x vs Sam-ba 2.12
Replies: 6
Views: 5846

Re: Companion 9x vs Sam-ba 2.12

Ok i have got some time to check sam-ba 2.12 issue. The problem is sam-ba related, despite not showing any apparent error, it terminate execution with error code 1. I have committed a "dirty fix" and it will work in next companion release. Romolo, Thanks and welcome back from a well earne...
by skylark
Thu Jan 17, 2013 2:10 pm
Forum: companion9x
Topic: Companion 9x vs Sam-ba 2.12
Replies: 6
Views: 5846

Re: Companion 9x vs Sam-ba 2.12

I'm sorry, but yes real life is taking me very busy, and furthermore i received the v3 board only yesterday, so now i suppose I will have some work. I hope to come back with some answer in the weekend. Hi, Yeah, real life always get in the way of things. I hope you enjoy your new board. Have fun. r...
by skylark
Thu Jan 17, 2013 1:04 pm
Forum: companion9x
Topic: Companion 9x vs Sam-ba 2.12
Replies: 6
Views: 5846

Re: Companion 9x vs Sam-ba 2.12

Hello everyone, I've been following for a while, and hoped to get things going on my own. But now I'm asking for some help. Please be patient. I've just completed the hardware part of my ersky ver. 3 upgrade. Everything works great. I installed Sam-ba 2.12 with patch, and after a bit of a struggle,...
by skylark
Mon Jan 14, 2013 8:13 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

MikeB wrote:Odd, r144 is there, I just fetched it down myself to test it was there.

Mike
Mike, i just re-installed 9x, Downloaded r144. All OK now. Thanks.
Stan.
by skylark
Mon Jan 14, 2013 12:51 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

MikeB wrote:Yes, it's ready.

Mike.
Just tried but it will not download. It is also showing last download as R143, in efdfect the last download I made was R130. Very odd.
by skylark
Mon Jan 14, 2013 12:18 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4539
Views: 1961242

Re: ERSKY9X Coding

RTC code looks OK, you must have a slightly slow crystal for the clock. It will take a while to design a fix, and implement it. It will need a co-processor code revision I think. r144 of Ersky9x is now released. The Pilot name editing bug is fixed. Slow and Delay now may go to 25 seconds, and the r...
by skylark
Sat Jan 12, 2013 11:55 am
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4092
Views: 1622815

Re: Audio (voice) - Stock 9X PCB

Hey, It's always good to have good news when we wake up.. ;) and I just did. CONGRATULATIONS Pino. Well done.. One battle is won. :D Now, you just need to win the war :mrgreen: :mrgreen: YEAH , I second that. Well done Pino. This must be a great confidence booster. I told you you would triumph in t...
by skylark
Wed Jan 09, 2013 2:10 pm
Forum: er9x
Topic: Audio (voice) - Stock 9X PCB
Replies: 4092
Views: 1622815

Re: Audio (voice) - Stock 9X PCB

Hello to all! Tigar! You NEED to desolder beeper and transistor! And "BEEPER" pad on my board is input pad, not output. You need to connect it with "base" of desoldered transistor. Then the beeps will sound via speaker. Please, find my last posts with photos. I have not time now...
by skylark
Wed Jan 09, 2013 12:10 pm
Forum: companion9x
Topic: C9x Sim Batt display Error ?
Replies: 8
Views: 5569

Re: C9x Sim Batt display Error ?

Romolo wrote:I will try to sort out all issues in the next days, vacation first, and stopping smoking later, have took me away from c9x too long...

Hi Romolo, Welcome back. I hope you enjoyed that well earned break. Good luck on the stop smoking issue. A wise move.

Go to advanced search