openrcforums

Hi Mike and João, I do not know how I did it, ..... I was so careful too, ..... :oops: I had two sets of voice and user folders on my Taranis SD card. :lol: (laughing at myself) And of-course, I add the new test voice sounds into the wrong user folder. Add Edit: There also seem to be a problem with ...

Thank you Dave and João, I made some new voice sounds and placed two of them in the SD/voice/user folder of my Taranis and went looking for them. They are not showing up in the Name/Voice File. I shorten their file name to 8 characters and still they are not showing up. They are TSSI Sig, 93 KB wav....

Hi Mike, If the XJT RSSI alarm values can be improved, it will be a big help to have a more consistent RSSI alarm. When time permits, thank you Mike for looking into this. Add Edit: Renaming the SWR (return telemetry signal) to TSSI/SWR is OK with me too. The return telemetry signal is usually lost ...

Hi Mike,

Could the filtering on the RSSI value from the XJT Transmitter be changed to match the the DJT that is sending
its values more frequently ?

Bob B.

Hi Mike & João, Is what you maybe are saying is that TSSI and SWR are really the same, and the different is in the label name only ? Yes I am using the DJT module with my Taranis. With the XJT transmitter you have to guess when you need to be give attention to the RSSI alarm as FrSky says when i...

Hi, I need some new Voice Sounds (for the " user " named voices folder) and not sure where or how to create them. Air Brake ON Air Brake OFF Elevons ON Elevons OFF RSSI Signal TSSI Signal SWR Signal Motors Armed Motors Disarmed Motor Armed Motor Disarmed I did try to create them and have f...

Hi Mike, I was using eepSkye (test 410, Mar 28 2015) and in the " Editing mode l" screen tab " FrSky " (telemetry settings), for " Screen 1 " and " Screen 2 " display settings drop down list, dose not show SWR in it. SWR is in erSky9x-x9d (test erx9d-r215 V.12...

Hi Mike, May have found another bug between ersky9x (test erx9d-r215 V.1296 03-18-2015) and eepskye (test 410 03-28-2015). In the erSky9x index menu "Voice" at VAxx line: VA15 / Source: A2 and in eepskye: A1 is viewed. And in the erSky9x index menu " Voice " at VAxx line: VA16 / ...

Maybe a new SmartieParts board that combines the Programmer Board, TelemetrEZ board
and a sound voice board all together.
With cost of all three boards added together, maybe Steve could consider looking into it ?

Bob B.

Hi Mike, Thank you, that's it, I needed to split the 90% and use FULL. :D Mix with Delay Slow Up and Down.jpg There seem to be a bug between test V.1296/erx9d-r215, erSky9x-x9d and eePSkye. In eePSkye I used settings Full (-45%FULL Switch(SG-) Offset(-45%) Slow (U4:d4)) and then flashed to Taranis R...

Hi, I have been trying to create a Mix with Slow Up/Down. Have when switch SG^ to be normal Twin Rudders action, switch SG- to Slow Down/Up movement into Rudder Air Brakes. Studying and trying the examples in the new er9x manual also with other multi-mix combinations have had no working Slow Up/Down...

Hi Mike,
I tested it on the model and it seems to work.
Even though it changes to CH13, it seems to be the value for CH14.

I need to lower the Delay and Slow time from 10 to maybe 3 as it is to long and to slow.
I do not have this mixed correct yet, I need to study it some more.

Bob B.

Hi Mike. I may have found a bug in eePSkye Revision: 410 March 23 2015. Working on Multi-Mix setting for Rudder Air Brakes with Delay & Slow. CH04 CH14 error CH13.jpg When making the setting in the Mixes line CH04, for Source CH14, the Mixes line of CH04 is showing Source CH13 instead of Source ...

Bob B.

Picture of F-22 V2 foam plane, Bob B.

HI, I could use some advice to how should I use full length Flaps. With the Multi-Mixing, I have the Ailerons working with the Flaps mixing. Should I have this action, or is it improper to fly this way ? :?: See Photo: Multi-Mixing Ailerons with Flaps / Elevators as Elevons. Multi Mixing Ailerons as...

I have a FrSky Smart Port GPS Sensor and if this GPS could do this, I am interested in this too.

Bob B.

Hi Mike,
No hurry as of yet, I have what need for now.

Bob B.

Hi Mike,

I think I will be in the future, want this ability.

Bob B.

Hi,
Thank you Mike fixing eePSkye. Bob B.

No hurry Mike, I was just reporting it.
I have been writing the mixes in eepSkye and testing with the Taranis Radio to model.
Still winter here in New England, about 2 and a half feet of snow, high winds, almost to 0 degree F at night.
Bob B.

Hi Mike, In the eePSkye test revision: 406 Feb 27, 2015 the simulator is failing to show CH01/CH02 AIL travel with Replace mixes using switch SD-. I was trying to use switch SD- to use the ELE with the AIL to work as elevons and with the simulator failing to show it working, I kept trying different ...

Hi João,

I am slow to catch on.

I have been trying to put the cart before the horse.
I need to follow the diagram (How Er9x Works) and set my mixes up before setting Limits.

Bob B.

Hi Mike, João and Everyone, Setting up home-built model foam plane F-22 V2, I have 6 servos to there 6 control surfaces, spit Elevators, full Ailerons and twin Rudders. Using Taranis with ersky9x-x9d (test erx9d-r215) and eePSkye (test Rev. 406). F 22 V2 Foam plane b.jpg I am not proficient with pro...

New LIMITS menu for eepe / eePSkye and er9x / ersky9x Here is a suggestion for labeling the Limits menu. For the values labels of Min and Max dose not describe what these two columns are doing. Please consider an Arrow to the Left for Min and maybe <Left Stick. For the Max label change to an Arrow t...

I have two new X8R coming from Aloft Hobbies (USA) and I am hoping they are not EU firmware.
If they are EU firmware, I will have to flash them back.

Bob B.

Hi Mike,

Could the Sky9x Rev. 3 (board) Radio be able to have 3-POS switch ?
It has been limiting to have most of the switches to be only 2-POS switches.

Bob B.

Confirm, XJT module to D8R-II receiver works using both Dipswitches OFF/com1/PXX/D8. Taranis (erSky9x-x9d) telemetry using external transmitter modules XJT module to X8R receiver/S.Port telemetry works with both DipSW OFF/com1/PXX/D16. XJT module to D8R-II receiver/telemetry works with both DipSW OF...

Hi Mike, When using the external XJT module with the X8R for the S.port telemetry. I found I made an error when reading FrSky paper manual for the XJT module, with setting the DipSwitches. I was using, with both dipswitches to be ON (up) which is for without S.Port working. I needed to have dipswitc...

Hi Mike, There was no SWR value shown. I tried the External XJT module and set it to PXX and I had NO Telemetry. :o Because I had bind the D8R-II plus Receiver in PXX (with NO Telemetry), I change it to PPM (with the XJT module) and now it dose have Telemetry working. :D This seems to show that ther...