It depends on where you found the bug (opent tx or companion):
https://code.google.com/p/opentx/issues/list
https://code.google.com/p/companion9x/issues/list
Sent from my GT-P3110 using Tapatalk 2
Search found 110 matches
- Mon Aug 05, 2013 6:58 pm
- Forum: General help (FrSky Taranis radio)
- Topic: Bug Reporting
- Replies: 2
- Views: 3281
- Mon Aug 05, 2013 6:44 pm
- Forum: FrSky Taranis radio
- Topic: STM32 F2 prozessor ADC with 10, 11 or 12 bit
- Replies: 24
- Views: 15934
Re: STM32 F2 prozessor ADC with 10, 11 or 12 bit
They should have produced the taranis with hall sensors.. they are not that expensive, and the gimbals would be much more accurate.. João I dont think so, in fact the issue with Taranis gimbals is due to being the potis not firmly postioned inside the gimbals mechanichs. If this is true, any sensor...
- Mon Aug 05, 2013 6:35 pm
- Forum: FrSky Taranis radio
- Topic: STM32 F2 prozessor ADC with 10, 11 or 12 bit
- Replies: 24
- Views: 15934
Re: STM32 F2 prozessor ADC with 10, 11 or 12 bit
Helle, Incorrect. Jeti DOES use Hall effect sensors, but reads the output of those using an ADC same as if normal pots were used. The advantage of the Hall effect sensors is that there is no (wiper and shaft) sensor drag and no wear, so the usage life is ....... Did you know this for sure ? I am ve...
- Sun Aug 04, 2013 7:15 pm
- Forum: openTx model setup
- Topic: Standard Glider Templates
- Replies: 42
- Views: 37840
Re: Standard Glider Templates
SR71 get 1.43 as soon will be available (short time) Romolo, just upgraded Companion to 1.43, but, after loading a fresh copy of Rob eepe file, I still get a strange value in "Ail L" channel offsets: -509% instead of GV1. I am running Companion on WinXP SP3. and if you edit that try and e...
- Sat Aug 03, 2013 2:09 pm
- Forum: openTx model setup
- Topic: Standard Glider Templates
- Replies: 42
- Views: 37840
Re: Standard Glider Templates
Romolo,Romolo wrote:SR71 get 1.43 as soon will be available (short time)
just upgraded Companion to 1.43, but, after loading a fresh copy of Rob eepe file, I still get a strange value in "Ail L" channel offsets: -509% instead of GV1.
I am running Companion on WinXP SP3.
- Fri Aug 02, 2013 6:52 pm
- Forum: FrSky Taranis radio
- Topic: STM32 F2 prozessor ADC with 10, 11 or 12 bit
- Replies: 24
- Views: 15934
Re: STM32 F2 prozessor ADC with 10, 11 or 12 bit
Helle,
The Jeti ds-16 doesn't have any ADC and analog potis either, because it uses an absolute encoder based on Hall effect sensor.
Sent from my GT-P3110 using Tapatalk 2
The Jeti ds-16 doesn't have any ADC and analog potis either, because it uses an absolute encoder based on Hall effect sensor.
Sent from my GT-P3110 using Tapatalk 2
- Tue Jul 30, 2013 6:22 pm
- Forum: openTx model setup
- Topic: Standard Glider Templates
- Replies: 42
- Views: 37840
Re: Standard Glider Templates
Ok, I see on Gcode that Linux releases are already available, alas I have to wait the 1.43 W$ build.Romolo wrote:SR71 get 1.43
- Tue Jul 30, 2013 6:05 pm
- Forum: openTx model setup
- Topic: Standard Glider Templates
- Replies: 42
- Views: 37840
Re: Standard Glider Templates
Rob,
opening your file with the last Companion release available (1.42 rev 2180), I get strange Offset values for Aileron mixer in both models.
Which release did you use to create the file ?
opening your file with the last Companion release available (1.42 rev 2180), I get strange Offset values for Aileron mixer in both models.
Which release did you use to create the file ?
- Mon May 06, 2013 10:24 pm
- Forum: openTx
- Topic: Offset moving while in flight
- Replies: 17
- Views: 6717
Re: Offset moving while in flight
I can confirm: with sky9x the only extension available is .bin.Flaps 30 wrote: Maybe it is different for Sky boards?
- Fri May 03, 2013 7:17 pm
- Forum: General RC Electronic Projects and Discussion
- Topic: PIPO ISU - stabilization board
- Replies: 160
- Views: 79182
Re: PIPO ISU - stabilization board
I am going to update my PiPO ISU with the most recent software, as found on Google code.
However, none of my many programmers (HK USBASP et similia) seems fit well with PiPO ISU's pin layout, at least using the 'standard' cable.
Have I to setup a special purpose cable ?
However, none of my many programmers (HK USBASP et similia) seems fit well with PiPO ISU's pin layout, at least using the 'standard' cable.
Have I to setup a special purpose cable ?
- Mon Apr 29, 2013 9:36 pm
- Forum: companion9x
- Topic: er9x support in Companion
- Replies: 24
- Views: 10328
Re: er9x support in Companion
External checkout are supported since subversion 1.6.MikeB wrote: I'm using a command line version of svn, not sure where I got it from originally, got it a long time ago.
What does
svn --version
report ?
- Sat Apr 27, 2013 9:08 pm
- Forum: er9x
- Topic: 9x, Frsky, and a Frsky Voltage Sensor
- Replies: 30
- Views: 16295
Re: 9x, Frsky, and a Frsky Voltage Sensor
The voltage sensor in the receiver has a range from 0 to 3.3 volt. To measure 11 volt with that the battery voltage needs to be divided to a voltage lore enough. The default ratio is 4:1. What you set up there is effectively that ratio, just that it uses different terms. Calculate 3.3*4 :-) Really,...
- Sun Apr 21, 2013 12:33 pm
- Forum: erskyTx (was ersky9x)
- Topic: Spontaneous reboot while flying and hanging shutdown issues
- Replies: 214
- Views: 87929
Re: Spontaneous reboot while flying and hanging shutdown iss
Heard any one using Sky9x board with Open9x using either either 2S or 3S power source report any reboot event? I am using open9x on a Sky9x board (the one with the discrete voltage regulator and big heath sink): no issues to be reported. I have a LiFe battery, standard RF module (no FrSky) and no S...
- Fri Apr 12, 2013 6:48 pm
- Forum: FrSky Taranis radio
- Topic: A nice blog to follow..
- Replies: 8
- Views: 5636
Re: A nice blog to follow..
The only comparison that makes sense ? ( that with the
Multiplex 4000)
- Sun Apr 07, 2013 9:43 pm
- Forum: openTx for FrSky radios
- Topic: openTx for FrSky Taranis manual
- Replies: 26
- Views: 56044
Re: openTx for FrSky Taranis manual
Reserved just in case Hi Kilrah, first off, many thanks for the manual, it is very useful even for us with the good old TH9, especially the "Model Setup" chapter. Just a small suggestion; when feasible, would be very useful to add in the Servos section the following diagram https://open9x...
- Sat Apr 06, 2013 1:27 pm
- Forum: openTx
- Topic: Im searching for...
- Replies: 5
- Views: 4044
- Sat Apr 06, 2013 7:43 am
- Forum: FrSky Taranis radio
- Topic: FrSky officially X9D announcement
- Replies: 170
- Views: 81262
Re: FrSky officially X9D announcement
The Standard Kit: $175 Taranis Transmitter Aluminum Travel Case Battery Charger Adapter Neck Strap The Combo Kit: $199 Taranis Transmitter Aluminum Travel Case X8R - 8/16 channel Full Duplex Telemetry Receiver Battery Charger Adapter Neck Strap As announced in http://www.rcgroups.com/forums/showpost...
Re: openX9D
ehm....Rob Thomson wrote: Easy to use?
I find it very difficult to read. MHO.
Re: openX9D
Please, no xml, anything but not xml, pleaseRob Thomson wrote: Maybe the script language should be xml?
- Sun Mar 24, 2013 9:33 am
- Forum: Hardware
- Topic: People willing to help with modifications
- Replies: 52
- Views: 77027
Re: People willing to help with modifications
I can help in Rome (S.Paolo), Italy. Three TH9 successfully modded. Contact me via PM.
- Tue Mar 19, 2013 12:09 am
- Forum: General Information & Rules
- Topic: Another forum name change
- Replies: 18
- Views: 13623
Re: Another forum name change
Whew ! I was thinking my Firefox was going to nuts ....
Just another name change instead..
Just another name change instead..
- Sat Mar 16, 2013 7:50 pm
- Forum: er9x
- Topic: DSM2/X and "Chinese Roulette"
- Replies: 31
- Views: 15105
Re: DSM2/X and "Chinese Roulette"
Correct link isHelle wrote:hy my friends,
here the link for the open source for the orange DSM2/DSMX software
http://code.google.com/p/orange-tx-m...mx/source/list
its for a ATmega with new features
Helle
http://code.google.com/p/orange-tx-modu ... ource/list
- Sat Mar 16, 2013 11:02 am
- Forum: General Information & Rules
- Topic: Forum Name Change
- Replies: 39
- Views: 25091
Re: Forum Name Change
GRRRRRRRRRRRR!!!!!! Every bookmark broken .... GRRRRRRRRRRR!!!! Not good! You need 301 redirects in place as all your Google results are broken. Can be done with your .htaccess if you have one. It seems to me that has been fixed. BTW, the name change is a good idea, I would add to the list even the...
- Sun Mar 10, 2013 9:24 am
- Forum: The Pickled Gnu (The Pub)
- Topic: X525 quad: how to wire multiple ESC-BEC to controller
- Replies: 1
- Views: 2232
X525 quad: how to wire multiple ESC-BEC to controller
I am in the process to set up my X525 quad. I found several references for what concerns the mechanical and setup, but all I found left me still with a doubt. When I connect the four ESC-BEC to the controller, have I to connect as well ALL the +5 leads or have I to leave out three of four ? Connecti...
- Sun Mar 03, 2013 9:11 pm
- Forum: openTx
- Topic: Is ATX MEGA 256 A3 supported in Open9x ?
- Replies: 1
- Views: 1749
Is ATX MEGA 256 A3 supported in Open9x ?
I discovered an ATXMEGA256A3 in one of my drawer: Is it good enough for improve a TH9X stock board ?
- Tue Feb 26, 2013 9:44 pm
- Forum: openTx
- Topic: How to get open9x simulation under Linux
- Replies: 24
- Views: 9735
Re: How to get open9x simulation under Linux
Too much space between + + ?Helle wrote: sudo apt-get install subversion gcc-avr avr-libc-qt4 python g+ +
sudo apt-get install libfox-1.6-0 libfox-1.6-dev
Code: Select all
sudo apt-get install subversion gcc-avr avr-libc-qt4 python g++
sudo apt-get install libfox-1.6-0 libfox-1.6-dev
- Sun Feb 24, 2013 12:24 am
- Forum: er9x
- Topic: Need programming to beep when THR is at 20% and 40%
- Replies: 3
- Views: 2767
Re: Need programming to beep when THR is at 20% and 40%
Try thatOzzy wrote:What programming would I need to do the following function?
Beep when THR = 20%
Beep when THR = 40%
No beep anywhere else (no beep in between, basically beep when crossing 20% and 40% THR).
it works in Companion9x (no radio at hand just now).
- Mon Feb 11, 2013 10:54 pm
- Forum: openTx
- Topic: open9x 1855 on sky9x board: Optrex display with no backlight
- Replies: 9
- Views: 4928
Re: open9x 1855 on sky9x board: Optrex display with no backl
Issue #134 created.bertrand35 wrote:Right, would you open an issue on the companion9x project?
- Mon Feb 11, 2013 7:27 pm
- Forum: openTx
- Topic: open9x 1855 on sky9x board: Optrex display with no backlight
- Replies: 9
- Views: 4928
Re: open9x 1855 on sky9x board: Optrex display with no backl
That is:bertrand35 wrote:You are showing the Preferences dialog, this is not the Settings inside the Tx!
https://www.box.com/s/83e2qjlk69pajopbnhnt
- Mon Feb 11, 2013 1:25 pm
- Forum: openTx
- Topic: open9x 1855 on sky9x board: Optrex display with no backlight
- Replies: 9
- Views: 4928
Re: open9x 1855 on sky9x board: Optrex display with no backl
You are right, of course: I uploaded the wrong URLbertrand35 wrote:You are showing the Preferences dialog, this is not the Settings inside the Tx!
Later this evening I wil change the URL to the correct one.