openrcforums

I really bought the Taranis to experiment on ..I changed the case and upgraded speaker and put M9 Gimbals in it..I was just wondering if I could unsolder the XJT module and install a internal module..No big deal as the external module will do what I need . I Use my pro as my main radio . ERSKY9X is...

Well,

thank you Daedalus for your offer to Mike. I am at least as happy as he is. Maybe more.

It seems that my arithmetic is out by a factor of 10. Not too bad, I have done worse than that.

Hi, Is it normal that nothing is heard if the Vario source value is less than 26 ? Let me check if I understand this: Vario source can vary from +1024 to -1024. +256 - 256 seems like a reasonable input for Vario source, since the increase of number or beeps per second stops at a value of 200, even i...

Hi, Since the Lemon Telemetry instructions points to this thread, and I have added some confusion :oops:, I want to clarify that setting up telemetry (in my case LM0052) with ersky9x is straightforward if you follow some simple rules; Use at least the release "ersky9xProvR222d3" found on t...

Hi guys, don't get me wrong. Please note that I am new to telemetry, and I was just surprised that nobody had raised the issue with the Vspd units, that where displayed as Vspd/10. That also made vario beeps quite strange, unless a scaler (Vspdx10) was used. That is solved now. Thanks again. In rela...

Thanks again,

It looks like the number of users of "non Frsky" telemetry with ersky9x is not very large.

Miguel

Telemetry protocol is now stored and displayed, thank you Mike. It is only now that I discover that Vario audio "Base Frequency", "Offset Frequency" and "Volume", are not being downloaded (and/or) displayed by eepsky, thats shows 0,0,Volume independent of the values ent...

Hi, this thread is a continuation of a discussion in the Lemon Telemetry thread, since it is not Lemon related. I think. I have been trying to nail the problem that I find with eepskye (Version 423, Aug 14 2018) that refuses to show telemetry protocols other then Frsky Auto or WingShadow How High. N...

Oopss, sorry I haven't mentioned, :oops: my display is upside down because my radio has the "brains" of a 9XR-pro (ARUni was no more available at the time.), but is in a different case with better sticks, and the wiring was considerably cleaner with the display upside down. I will follow y...

Still no luck with Revision: p423, aug 14 2018.

Miguel

Hi,

Downloaded from your link eepsky "Version p423, May 2018" but same results. (Windows 7)

Can you reproduce the problem? or is it on my side?

Miguel

Hi Mike, thanks again,

ticking the "DSM 'A' as RSSI" option on the telemetry menu did the trick. It shows a full bar and 100% Rx when close enough.

Miguel.

Hi, Thanks Mike for the R222d3 release. Vario numbers are now consistent. Max RSSI for this receiver is 31 in close proximity. Is there anyway to show the RX bar as 100% when this value is 31?. I understand that a scaler can be used to show the Rx RSSI number in a custom screen, but I do not know no...

Hi Joao,

I also had the same misbehaviour with my rotary encoder, and I thought I got a faulty unit.
The other day reading this thread I found your RC filter and installed it.
Now the encoder works as it should.

Thank you,
Miguel

Hi Mike,

So, decimal is just for display purposes. Easy to understand when explained, thank you.

Back to the Lemon Vario set up.

Miguel

Just to illustrate what I was trying to say, in relation with scalers and units, I have set up three scalers with source on variable Temp (T1=), because Vspd is a variable that has some noise and changes very fast, making photos of the display unclear. All three scalers have been set up with x1 mult...

That was it. No switch was selected. Now I can hear sounds with a scaler x10. Sorry for the fuss. May I suggest to use a "ON" default ?. I do not want to add more confusion, but it seems that changing the number of decimals on the scaler screen also changes the displayed value by a factor ...

I have set up a scaler SC2 with elevator stick as the source, divided by 5, no destination, no decimal places. Vario source is set to SC2(in fact it is set to SC2 name "ele"), volume is set at 23, and ele (SC2) is added to the custom telemetry screen. On the telemetry screen, SC2 varies wh...

I tried to use a scaler, but, If I use a multiplier x10 with one decimal selected, i get x100 numbers displayed for Cus1. Found that the decimal point is not shown, and that no decimal place selected on the scaler shows the right number. (only the integer part) Anyway, no vario noise is heard on the...

Fix for the Vspd logging will be in the next test version. Currently, if the display is 1.5 (m/s), the logged value is 150. Mike Hi Mike, thanks for coming. Please note that it is not the logged value that is wrong. The wrong value is the displayed one. Maybe that is why no vario tones are heard ? ...

Thanks Joao,

Tried the latest release ersky9xProvR222d2 (sounds like R2d2, should make vario noises ) , with the same results.
Very low numbers for Vspd on the display, much higher on the log (x*10 maybe ?).

Miguel

Hi, A friend of mine has asked me to test a Lemon LM0052 receiver telemetry. The receiver is sitting on my bench, telemetry is working, basic parameters (altitude, voltage, temp) look right, with the exception of Vspd (vario) that seems way out of range. If i raise the receiver by hand by (aprox) on...

I tried with c7 and everything works. I then downloaded a fresh copy of c8, just to discover that the file is of different size of my previously downloaded c8. Dooooohhhh. Corrupted file. Not too much, but enough to make you loose your time. Sorry for the hassle. Needless to say, with the good copy ...

Well, thank you guys,

It seems that I have something in my setup that is not working properly, and I'm a bit confused.

Knowing that the problem is on my side, I will investigate further and keep you posted.

Thanks again for your help,
Miguel

No other modules at hand, sorry.

Miguel

Yes, I did something wrong yesterday. Just checked, and the c8222 version does not have this problem. But, (unrelated, I suppose), I cannot bind anything with this release. When I press the BIND (Ver.1.2.0.0), the screen showing BINDING in the middle flashes (no haptic) and disappears within a secon...

Thanks Joao,

No luck. Just updated to ersky9x-pc8r222 dated 04.11.2018 and the problem is there.

Going back to ersky9x-pa7r222 30.05.2018 solves the issue. Somewhere in between a bug is born.

Miguel

Hi, I am currently using version ersky9x-pc2r222 stamped 19.9.2018 in a 9xPRO radio. I am trying to include a GVAR (already defined) in the Weight field in a mixer line, but no matter how loooong ( or how hard ) I press the MENU LONG key, the display will not switch from numbers to GV1. Same for the...

Hi, I suppose it is extremely difficult to write a manual about something that changes so fast as Ersky9x. If there is anyway that a non heli, multirotor or telemetry user can help, please le me know, I will be glad to contribute. Maybe a wiki ? Anyway, since with Ersky9x there are usually several w...

Hi, From what I read on your screen, your radio is waiting for you to put the sticks and pots on the center position and press "Menu". Once you do that, you will be asked to move the sticks (and pots) to the max and min position to set the travel. Have a look at page 3 of the manual "...