openrcforums

There is some sort of configuration I need to get correct for the current measurement. I'm using a couple of power resistors to provide a current load. At one point I did have a current measurement that was just over double the actual current. I added a load of 1.9A and it changed to 4.3A, returnin...

Unfortunately, I have had no success with my Funduino Pro Mini 328/16 http://img.dxcdn.com/productimages/sku_244969_2.jpg http://img.dxcdn.com/productimages/sku_244969_3.jpg or Arduino Nano 328/16 http://buzzhobbies.com.au/image/data/Airbot/Bearhug%2018a/20150415_145223.jpg I connected the APM -> Ar...

I just posted the .hex I compiled and tested this morning (erksy9x test versions thread). The values being sent by the Arduino over SPort currently are: TEMP1 = APM mode ALTITUDE GPS COURSE VFAS = main battery voltage *BASEMODE TEMP2 == # satellites CURRENT RPM = engine speed *VCC *CPULOAD *HOME_DI...

However, I did test the Teensy code with your latest ersky9X Code. The compass works... some of the data is reporting... If I could map out which screen variable was which data point... I could re-arrange that for you for a flavour with Teensy? Then we can have a flavour for Arduino as I recall you ...

Mike, have you attached a compiled version of the Hex yet for APM_Mavlink_to_FrSky?
Could you just grab it from your compiled directory?
I also have a problem with compiling your folder and .ino file.

Thanks Mike, I guess the size of the code doesn't really matter much as long as it all works
Appreciate you working on this...

great print quality... nice job!

Awesome! Thanks, I am having memory lapses... I know we discussed this.

Sorry Joao, don't mean to post it like this... just wanted to offer it up as he is waiting for them... @9XTremist I have 2x Taranis Gimbals in the box(Brand New) if your interested. https://dl.dropboxusercontent.com/u/58223709/_WEB/9x%20Radio/Gimbals.jpeg I have had them for a while and never got ar...

Hi Mike, I was thinking last night... and I am sure we started to discuss this but just to reiterate.. I think the best solution would be both of these use cases... and I will just throw it out there as ideas... 1) Some people don't use FrSky. Some use oLRS and would like to have the ability to just...

No problem. Away on business for a few days. I can use arduino too if needed.


Sent from my iPhone using Tapatalk

UPDATE: After crossing the wires on the inside, I was able to get some data sent over... https://dl.dropboxusercontent.com/u/58223709/_WEB/Mavlink_Support/IMG_1552.JPG RPM changes with Throttle from 0 to 3000 units https://dl.dropboxusercontent.com/u/58223709/_WEB/Mavlink_Support/IMG_1553.JPG The N ...

@Brodziek, looks really good... @Mike, tested the first go with baud at 57 in APM Setup is : Proto to ArduP X8R --> Teensy on SPort --> APM Telmetry 9x with XJT Module Data flowing by connection to Tower App on Android Tablet. Able to arm, takeoff, etc... (The APM will still do this even if its not ...

Thank you!
Was there just the one screen?
Also, did you get good voice commands setup for this interface?
Would love to see them.

Cheers!

ShowMaster wrote:Ok, got a spool of chipQuick .020 63/37 solder.
I'm good

Thats the good stuff..

Happy to report some progress.... I couldn't wait on getting a FrSky Lite Converter from HK or other so I found an diagram on the WWW for SPort/XJT Signal Inverter. http://sizz.name/wp-content/uploads/2014/01/sheme.jpg Credit to.... After building it... I used a NPN 2N2222A instead of the BC337-40 (...

ah, thanks... amazing..

Thanks Kilrah/Mike, appreciate the information. I guess then, If I want Telemetry, which I do... and really all I want is my 9x to utilize all the wonderful information from APM/ArduPilot. I am running er9x(mavlink flavour) or openTx(mavlink). The problem is that I can't any flavour of something wor...

Thanks Mike, regarding the one cable... if this radio were to be used with Mavlink or Ardupiolot, would the same be true?
Would I require inverter or straight through is right?
Say I setup the XJT in D Mode. Then I would use the Tx/Rx side (rs232?)

Hello my fellow 9x'rs... I have been experiencing some problems and would like a sanity check if possible if someone could go over the setup here. I have been following this image... http://api.ning.com/files/J*zMYSkl7KYm5ZPPbfqzXlIaNRMmB0hhONrOudhjDZPxn*iarLmLXUCmck6*7x1Q9Xwi3wGQc4dB1HbJRVrWZg__/Fr...

JayC wrote:

Great Mod, very clean...

just curious as to what you have going on on the top right with resistor and transistor i think?

Thanks

Those telemetry screens look significantly different from what I see with ersky9x Is that intentional? Or can I get them to look similarly? For example is it possible to show the armed status and the GPS orientation graphic? Edit: my mistake, I just realized that this was a mod of er9x for mavlink....

Hello tomari, thanks again for posting.. finally something 9x specific... not that it should matter...but still comforting.. -standard telemetry mod? -straight connection of 9x radio TX to RX and RX to TX? -you power your 3dr radio with 9x... so GND is connected too? or is this just consumption with...

What were you running on the 9x?
Opentx with Mavlink Option?

This is the only thread i have been able to find with someone doing anything with 9x. not the 9xr or 9xrpro.
All i have is 9x's and really want to get Mavlink going on it.

Thanks for posting.

So your Hex files is for the Arduino?

Hello all, has anyone printed out the boards and have any extra for sell?
Pls PM if you do.

Thanks.

No fix as of yet on the 9Xtreme Hissing Noise...?
Did anyone try the new speaker yet? Did it do the trick?

@flybabo, thats awesome.. can't wait to see/read this.
Thanks for affirming the Rhetorical NoWay...

Thanks, please don't forget about poor old er9x if possible. (just saying... or should those radios be retired?)
I have a few of those radios too... like many others...

Mike, this project here is the "shizzle' when it comes to get APM data on the er9x. Is it possible to make this part of your release for m128-er9x? or ersky9x? It currently uses older Rx's sending data on the Digital side... would it be feasible to make work on SPort on X8R for sending data bac...

Does anyone having this setup working on 9x... all i see is 9xr and i really don't know what the difference is other than a slight change in Motherboard...

but should be same....
if you upgrade to m128 that is and solder in the ISP Programmer wires.