openrcforums

jhsa wrote: ↑Tue Jul 17, 2018 4:01 pm After reassembling. Didn't need to desolder anything. Just took the switch apart.

João

It was kept open for quite a few days. It had gathered a lot of dust over it. So, dust is the result of the broken switch?

jhsa wrote: ↑Tue Jul 17, 2018 12:23 pm The power switch is broken..
I also had that problem. Couldn't find replacements. I had to take the switch apart and clean the contacts with alcohol and a tooth brush.. Then had to assemble it again..

João

Did it work after resoldering?

When I switch my 9XR Pro on, it shows SHUTTING DOWN followed by POWER OFF and the message stays on screen until I switch it off. If I move the power button a bit, it brings me back to the normal screen. I tried reflashing but when I hold the trim buttons inwards followed by the power button, I get a...

That was a calibration issue. I was only setting the midpoints and not moving the sticks after that. Problem solved. Thank you everyone for your help.

jhsa wrote: ↑Thu May 31, 2018 2:56 pm Nope, video can't be seen on my computer or smartphone..

What is the title of the video so we can search?

João

I am sorry. The video was set as private. Should work now.

Video seems to be unavailable João Works okay for me. Try this http://redirect.viglink.com/?format=go&jsonp=vglnk_152777662997114&key=76563c4d2e1e0340ce7f6d67b106dab9&libId=jhumqi1s01002ns2000DAqb3q2tms&loc=http%3A%2F%2Fopenrcforums.com%2Fforum%2Fviewtopic.php%3Ff%3D122%26t%3D5575&a...

ER9X Calibration issues

I am facing this issue with ER9X. OpenTX works just fine. How do I calibrate it properly?

Hey, I recently got a 9XR Pro with OpenTX installed. I wish to flash back to er9x but when I loaded the firmware on SD Card and tried flashing in the bootloader menu by holding down the menu key, I see nothing happens on the screen. I tried flashing back using eepskye but when I run this program, it...