openrcforums

Hi David. From oXs documentation Best results are provided by the MS5611 barometric sensor. Such a sensor is usually mount on a board (like the GY-63 or the GY-86) which have a 3.3 voltage regulator and a I2C level shifter. * Still it is possible to use a board with a BMP085 or BMP180 or a BMP280 se...

Keep on trying

Maybe this here helps ...
https://www.rcgroups.com/forums/showth ... Windows-10

Greetings to down under.

cu KH

Loaded and unpacked 'FreeLink_v3.3_20191010.rar' Have a 64 bit Win 7 here https://imgur.com/YThFR29l.png so I choose X64 and clicked Free Link.msi Creates this icon on desktop https://imgur.com/3aiUvmrl.png Clicking that icon ... https://imgur.com/hgTf6sjl.png Not working. So I start the compatibili...

Berkie, it took me around one hour, to get it running here.

Which Windows do you have? 7 or 10? 32 or 64 bit?

Did you pick the right package X64 or X86, X64 is for 64bit and X86 for 32bit ....

br KH

The thing seems to be a bit crappy.

Needs to be run in compatibility mode (Win XP service pack 3) under Win 7 and Win !0 here.

br KH

The 'files ' are Config.basic and config.advanced. The 'reader' is the application which is used to just read the content of the files and not work on them. It is here "Text" and not 'Arduino'. When I will work on it then I will open them in Arduino of course. I see no problem in that. Ne...

Billy60 wrote: ↑Wed May 27, 2020 6:21 am Perhaps it would be useful to mention that you can read the files only one by one

'files' What files??

Billy60 wrote: ↑Wed May 27, 2020 6:21 am I had to close the reader to get to see the next file after clicking on 'generate ...'.

'reader' What reader??

br KH

No problem here either with WIN 10 ...

Loaded the master,.zip and unpacked it.

the *.ino loads inside the Arduino IDE.

Starting the configurator.exe also works.

br KH

So PROBLEM SOLVED, at least for me

cu KH

BMP280_GPS29042020.ini.tar.gz

Jim, this is now your NOT WORKING BMP280 + GPS oXs ??

br KH

Understood Jim. Then please post the working baro oXs (oXs_config_basic.h and oXs_config_description.h or the complete *.zip or ...) and the working GPS oXs and the NOT working baro + GPS here. I (and maybe mstrens) will have a look. You could also try the #define DEBUG thing with the NOT working ba...

I have got each sensor working! (It appears I need to keep repeating this). But not with both together. You have got each sensor working with openXsensor ? Do I get that right, Jim? You had the baro values on your Taranis and you had the GPS data on your Taranis? And were are the pictures of that s...

Hello Jim. Especially for you. 1. Took an Uno and a BN-180, 3 jumper cables and a 10 k resistor 2. Wired as the diagram shows (but 5v, not 3.3V) https://imgur.com/Bcdz181l.png 3. Started Arduino IDE with oXs_v8.2.13 4. Deactivated in oXs_config_basic.h and oXs_config_advanced.h everything but GPS (N...

Jim, one remark on the circuit, you posted. My BMP 280 has a 662k voltage regulator on the shield, I run GPS and BMP on 5 V instead on 3.3V. And you know, that, when the GPS is connected to the Nano, you can NOT flash the oXs code to the Nano?! That is, because when flashing the oXs code to the Nano...

I have had the GPS working and sending accurate coords back to my Taranis X9D Plus. Does that clarify anything? Jim, so the BN-180 is ok, I assume?! But then I don't understand, what you are doing with I2C address and Adafruit library?? I2C address and Adafruit lib has nothing to do with oXs in thi...

There is a conflict around the respective 12C address's I am advised. I read instructions somewhere that the adafruit library for the BN-180 has to be downloaded and edited with the 12C address changed to xx76. The BN-180 communicates with TX RX, NOT over I2C bus! So why should you change an addres...

aranguren wrote: ↑Sun Apr 26, 2020 1:50 pm so if it doesnt connect what is the problem then?

Did you try another USB cable?

br KH

Bruchpiloten wrote: ↑Fri Apr 24, 2020 7:49 pm ... but I don't get any Data on the Horus X12 with FrOs.

Just curious.
My personal experience with oXs is on FrSky and MPX.
Could FrOs be a problem here?

br KH

Jim, if you can not upload 'blink' there is definitely something wrong. There are USB cables, which (from time to time and in conjunction with worn out USB connectors) can give trouble. Also avoid USB hubs. Get rid of those components. No use to keep them in the drawer. Why don't you have some Unos ...

Jim, you are aware of this here!?



And check/change your USB cable and use another USB port.

And if you see a problem like that, always try the 'blink' sketch in between to reassure.

br KH

PS. 'BMP280_GPS21042020.ini' compiles and uploads ok here ...

Jim, as always, you are very sparingly with information. :roll: What are you doing there? What components, what sketch? Just a rough guess (from oXs documentation) * You must avoid having both GPS and USB connected at the same time because while uploading a program in Arduino, there will be conflict...

ronron84 wrote: ↑Sat Apr 18, 2020 7:17 pm I'm trying to get temperature value from 5611 in openxsensor for frsky, do you know an easy way to do it?

I think, you should start a new thread.

br KH

Hi Jim. Good to see you back :D About your question. I keep it like that with all version of oXs over the years, I use it. This is a pic of the folder oXs 8.2 with the main program openXsensor.ino and the additional files. Bildschirmfoto_2020-04-07_07-29-58.png I made an additional folder inside thi...

Thank you Kilrah. Was just curious.

So default has been changed from 2.1 to 2.2.

br KH

I guess, this setting is hidden here ~/.config/OpenTX/Companion 2.2.conf in this part profile0\simulatorOptions=@Variant(\0\0\0\x7f\0\0\0\x11SimulatorOptions\0\0\x2\0\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\0\0\0\x32\x1\xd9\xd0\xcb\0\x2\0\0\0\0\x3'\0\0\0\xf5\0\0\x5\xfa\0\0\x3...

When I start the companion sim in 2.1.9, it shows me the right stick (throttle) in mid postition https://imgur.com/b3d8DVAl.png On 2.2.4 and 2.3.7 I see the throttle in down position https://imgur.com/x5p9DGGl.png Tried to find a setting in 2.2.4 and 2.3.7 simulator to have same mid position as in 2...

Hi João. Don't have a black pill, only blue pill and maple mini. But I see problems with bootloader mode (blue pill) when using the Arduino IDE under Linux: I don't see that under WIN 10. I guess, you are using Linux?! But better ask here https://stm32duinoforum.com/forum/index_php.html ;) br KH

You are using a FrSky D8R-II plus.

Mstrens 'oXs_config_basic.h' lists this line here
This is NOT working, must be FRSKY_HUB

Your Arduino IDE screen should look like this



In this screen you can adjust 'by editing' the two config file to your needs.

You can do that directly or use the CONFIGURATOR ...

After doing so, flash the Pro mini like you did with 'BLINK.ino'.

br KH

Soldering those 0402 requires the necessary equipment (soldering station with fine tips, tweezers, fine soldering wire - preferable lead wire, flux ...) and at lot of ROUTINE!! Before starting on the PCB, you should question yourself. If you have the slightest doubt, leave it and 'a new main board w...