openrcforums

Mode 2. Only right gimbal has issues but if I’m gonna replace anything I would replace both of them and for something with better quality and easy to install. I guess it’s too much to ask :/


Enviado do meu iPhone usando Tapatalk

Ok, check if the case of the pot is moving on the gimbal.. It has happened and the fix is to somehow glue the pot case to the gimbal. then calibrate the sticks again. It might not be the issue, but its worth check. you could use hot glue for example, if that is the case.. João Please check this.. J...

By the way, if the pots are low quality can’t we just replace them for a better one instead of the whole thing ?


Enviado do meu iPhone usando Tapatalk

I’m not sure I was clear enough. My problem is not a software or electrical issue. It’s mechanical. I can see the right stick struggling to move back from top to center. I believe it’s either the spring (I suppose there’s one) or something is sticky.


Enviado do meu iPhone usando Tapatalk

Did you try calibrating your radio's gimbals? Please go to "Radio Setup / Calibration" select it, and follow the on screen instructions.. João Yes I did. But the right gimbal behaves differently in the upper and lower parts. Sometimes it sticks up and takes more time to center. Enviado do...

Well. I just spoke with hobbyking (livechat) they are sending me a new one. I dont even have to ship this one back to them!! woohoo. But I read that people put the aurora 9 gimbals in this thing. I will prolly end up doing that. I really like this radio. Couldn't ask for more. I have taken a vow to...

Ok, thanks again João I didn’t had to buy new accessories :) USB cable plugged in, radio calibrated, Aerofly RC7 bought from the Mac App Store. Only the sticks are working though, no buttons or pots. But that’s already a very good start. https://uploads.tapatalk-cdn.com/20180801/5cc2b5ca1ab9e7a4a3bd...

that's the only simulator I found for the mac:

https://www.ikarus.net/en/

Good, well done :) Updating the firmware shpuld be common sense, and people should not have to be reminded to do it :) Can’t agree more. But I believe it’s worth mentioning that 9XR Pro won’t work out of the box with X8R and telemetry. It can save a headache for many people. There aren't any manual...

Ok, FW updated to r221. PXX up and running, RX bound successfully, servos responding, telemetry working !

This definitely should be warned in the manuals. I can help with that.

Thanks guys.


Enviado do meu iPhone usando Tapatalk

are those manuals source code available anywhere ? I started reading them and I'd like to contribute back with updated information I am finding here in the forum.

hello there,

will this works with 9XR Pro and RealFlight/other simulator:

https://hobbyking.com/en_us/frsky-proto ... atior.html

?

If not, can someone please point me to the correct cable (i'm in trouble finding one) ?
Please note that I'm running a MacBook.

Thanks.

oh God I just realized I took the AVR cable idea from a regular 9XR video, not the PRO version. My bad.

Good thing the wait is over, I can update the FW immediately
I might even try the update with a SD card instead of USB.

best wishes.

jhsa wrote: ↑Tue Jul 31, 2018 9:58 am Please go to www.er9x.com, download the latest firmware and update your radio.. version 204 is way too old..

João, thanks for the info ! My AVR programming cable is on my way now.

By the way, if R204 is that old why they are still making radios with this firware ?

MikeB wrote:Change the protocol to XJT (PXX), remove the link from the Rx, then bind using the "Bind" option in the menu.

Mike.

When I choose PXX there is no such menu as bind. The line after protocol reads “1st CHAN”. FW r204. Any clue ?


Enviado do meu iPhone usando Tapatalk

hello there just bought my 9XR Pro with stock firmware. since all documentation here cover up to R204, what do you think is the best approach to get to know this radio. should I keep stock FW and read everything then update later or should I update it first and read docs with newest FW already in pl...