Search found 18390 matches

by jhsa
Sat Nov 28, 2020 11:37 pm
Forum: FrSky Taranis radio
Topic: FrSky Enhanced Receiver Antenna
Replies: 8
Views: 7013

Re: FrSky Enhanced Receiver Antenna

Antennas inside the fuselage?
Any carbon parts around them?

João
by jhsa
Sat Nov 28, 2020 11:34 pm
Forum: Hardware
Topic: Turnigy 9x burned pad
Replies: 8
Views: 5788

Re: Turnigy 9x burned pad

What is RNT? :)
Picture of the pad please?

João
by jhsa
Sat Nov 28, 2020 11:32 pm
Forum: er9x
Topic: [SOLVED] Yet another help request: Trainer/trainee, two 9X's ...
Replies: 5
Views: 3670

Re: Yet another help request: Trainer/trainee, two 9X's ...

Please post a good picture of the trainer menu on the teacher radio.
Also, the student (Trainee) radio should not have the same model as the trainer radio. It should have just a default model with the main 4 mixes..

João
by jhsa
Tue Nov 17, 2020 3:35 pm
Forum: ersky9xr
Topic: csv.file
Replies: 16
Views: 10520

Re: csv.file

Thanks Mike. that is wonderful.. Does that mean Eepskye doesn't need eepe installed to run anymore?

João
by jhsa
Mon Nov 09, 2020 4:49 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Closing down SmartieParts. Get em while you can.
Replies: 3
Views: 20842

Re: Closing down SmartieParts. Get em while you can.

Thanks for all Steven. I wish all the luck. Hopefully we will see you again soon with some other cool projects.

João
by jhsa
Mon Nov 09, 2020 4:46 pm
Forum: er9x
Topic: [SOLVED] Help - stuck in HI rate + LOW EEPROM alert
Replies: 27
Views: 15411

Re: Help - stuck in HI rate + LOW EEPROM alert

Mike, what about the possibility of adding an External Eeprom module? I use a few on some of my projects, but they are i2c.
I believe there are also SPI Eeprom chips.. They shouldn't need many components also. Quite easy to connect, I would say.

João
by jhsa
Mon Nov 09, 2020 4:38 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Power Issue
Replies: 17
Views: 15022

Re: 9XR Pro Power Issue

Rad wrote: Mon Nov 09, 2020 5:13 am My main radio is that 9xtreme you already know, this one has little use, so I am surprised it failed so fast.
Sometimes that is the reason things fail faster :) :P

João
by jhsa
Thu Nov 05, 2020 8:29 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro Power Issue
Replies: 17
Views: 15022

Re: 9XR Pro Power Issue

Did you find a direct replacement?

João
by jhsa
Sun Oct 25, 2020 12:13 pm
Forum: er9x
Topic: Turnigy 9x processor upgrade
Replies: 24
Views: 15329

Re: Turnigy 9x processor upgrade

If you follow one of the links under all my posts, you will be able to donate to Mike.
The other link points to some Er9x / ErskyTX tutorial videos I have made a few years ago.

João
by jhsa
Tue Oct 20, 2020 4:08 pm
Forum: er9x
Topic: Solved, Flysky TH9X and Banggood 4 in 1 Module won't bind to Spektrum receiver
Replies: 17
Views: 13552

Re: Flysky TH9X and Banggood 4 in 1 Module won't bind to Spektrum receiver

It could be a broken or disconnected Antenna on the MPM.

João
by jhsa
Tue Oct 20, 2020 4:02 pm
Forum: openTx
Topic: A Simple Auto Launch System
Replies: 2
Views: 2235

Re: A Simple Auto Launch System

I remember doing something similar a few years ago, but on Er9x, not OpenTX. As far as I remember, I would hit a switch, then had to launch the model right after, then a couple seconds later the motor would turn ON, to the throttle position setting, not necessarily to full throttle.

João
by jhsa
Wed Oct 14, 2020 1:15 pm
Forum: Turnigy 9XR PRO radio
Topic: HELP PLEASE! Possible encoder issue, don't want to fry the new board...
Replies: 42
Views: 24320

Re: HELP PLEASE! Possible encoder issue, don't want to fry the new board...

As far as I know, all 9XR-PRO radios have a bootloader :) Even my pre-production radio ;)

João
by jhsa
Sat Oct 10, 2020 1:26 pm
Forum: Hardware
Topic: tr9xr pro power on NO MUDULE fitted???????
Replies: 2
Views: 2436

Re: tr9xr pro power on NO MUDULE fitted???????

But DO NOT insert or remove the module while the radio is ON. That could damage it.

João
by jhsa
Sat Oct 10, 2020 11:57 am
Forum: Turnigy 9XR PRO radio
Topic: HELP PLEASE! Possible encoder issue, don't want to fry the new board...
Replies: 42
Views: 24320

Re: HELP PLEASE! Possible encoder issue, don't want to fry the new board...

Mike, you could still use it to adjust a global variable, if you use it combined with a key to change screens..

João

EDIT: Hmmm, wait, I forgot that some of use do remove the navigational keys. :(
by jhsa
Thu Oct 08, 2020 2:34 pm
Forum: er9x
Topic: Turnigy 9XR (not PRO) + FRsky R9M HELP!
Replies: 22
Views: 9489

Re: Turnigy 9XR (not PRO) + FRsky R9M HELP!

Are you using companion to flash Er9x?
I think you should use Eepe instead. Get it here:

www.er9x.com

João
by jhsa
Wed Oct 07, 2020 2:10 pm
Forum: ersky9xr
Topic: csv.file
Replies: 16
Views: 10520

Re: csv.file

That would be cool Mike, thank you.

João
by jhsa
Tue Oct 06, 2020 8:58 pm
Forum: Turnigy 9XR PRO radio
Topic: HELP PLEASE! Possible encoder issue, don't want to fry the new board...
Replies: 42
Views: 24320

Re: HELP PLEASE! Possible encoder issue, don't want to fry the new board...

The cheap encoder I installed on my 9XR-PRO didn't work very well until I did this:
circuit-schematic-v2.jpg
João
by jhsa
Tue Oct 06, 2020 8:37 pm
Forum: er9x
Topic: Green processor issues.
Replies: 7
Views: 4671

Re: Green processor issues.

Well, I don't have any radio with that processor, and if I did, first thing I would do would be replacing it :) So, I have no experience with it. But I think other users did flash it successfully with Er9x. I am not sure, but I think Mike made a special version for it. I think it might be one of the...
by jhsa
Sun Oct 04, 2020 10:34 pm
Forum: er9x
Topic: Green processor issues.
Replies: 7
Views: 4671

Re: Green processor issues.

First of all, did you try to flash the radio? If so, and if it didn't work, what error is being displayed?
We need to know exactly what you are doing so we can help you. Don't forget that we cannot see your stuff :)

João
by jhsa
Sun Oct 04, 2020 11:23 am
Forum: ersky9xr
Topic: twin turbine RPM
Replies: 15
Views: 9351

Re: twin turbine RPM

In passing, I see I've been working on er9x/erskyTx for over 9.5 years! At present, I'm having a bit of a break from "wall-to-wall" programming, just doing a few fixes and some things that interest me. I'll probably get back to doing more in a while! Mike Wow, Have I been using Er9x that ...
by jhsa
Sun Sep 27, 2020 9:02 pm
Forum: openTx
Topic: Turnigy 9XR-Pro
Replies: 4
Views: 4461

Re: Turnigy 9XR-Pro

Why? Only because you can't get OpenTX on it? :)
As I suggested, try ErskyTX. You might get a good surprise. Maybe you like it. :) Well, I do. It is the firmware I use on all my radios.

João
by jhsa
Sat Sep 26, 2020 11:36 am
Forum: openTx
Topic: Turnigy 9XR-Pro
Replies: 4
Views: 4461

Re: Turnigy 9XR-Pro

OpenTX, as far as I know, doesn't develop for that radio anymore. I believe there are even some bugs / problems that were never fixed. I think your best option is to flash ErskytX. It is still being developed for all supported radios, and the Pro is one of them. It is also an excellent firmware with...
by jhsa
Tue Sep 22, 2020 11:02 pm
Forum: ersky9xr
Topic: twin turbine RPM
Replies: 15
Views: 9351

Re: twin turbine RPM

This is cool Mike, thanks. Would it also work with 2 openXsensors reading the cells of 2 different 3s batteries?

João
by jhsa
Mon Sep 21, 2020 12:33 pm
Forum: Turnigy 9XR PRO radio
Topic: Did I erase my radio/chip? Or just fry a regulator?
Replies: 21
Views: 14195

Re: Did I erase my radio/chip? Or just fry a regulator?

You could also have voice on your 9x radio. But you would have to build a board for it yourself.
I have a 9x radio with stock board that has both voice and an encoder. I did upgrade the processor to an Atmega2561 though.

João
by jhsa
Sat Sep 19, 2020 9:06 am
Forum: openTx
Topic: How to transfer model settings between 2 radio without companion?
Replies: 5
Views: 4887

Re: How to transfer model settings between 2 radio without companion?

They are script files for ErskyTx. Actually I think that since a while there is only one that does both transmitting and receiving.

João
by jhsa
Wed Sep 16, 2020 1:41 pm
Forum: openTx
Topic: How to transfer model settings between 2 radio without companion?
Replies: 5
Views: 4887

Re: How to transfer model settings between 2 radio without companion?

I can, but I use another firmware..
:)
With ErskyTX I can transfer models and other files between transmitters via bluetooth :) Your radios must have Bluetooth of course :) Here is a video I made..

João

https://youtu.be/xG194ryw38Q
by jhsa
Wed Sep 16, 2020 1:30 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Any chance to add the Pro Micro Board to OSX in the near future ?
Replies: 14
Views: 7464

Re: RE: Re: Any chance to add the Pro Micro Board to OSX in the near future ?

kalle123 wrote:Yes, but the Nano is bigger, just like the blue pill ...

AND I DON'T HAVE THAT MUCH SPACE :roll:

br KH
I didn't say it shouldn't be ported to the Pro-Micro.. I just said I would like to see it on the Blue Pill also. :) If ported to both, even better. ;) It gives more possibilities. :)

João
by jhsa
Tue Sep 15, 2020 2:09 pm
Forum: ersky9xr
Topic: twin turbine RPM
Replies: 15
Views: 9351

Re: twin turbine RPM

Custom telemetry field? Option to rename it? ;)

João
by jhsa
Mon Sep 14, 2020 2:48 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Any chance to add the Pro Micro Board to OSX in the near future ?
Replies: 14
Views: 7464

Re: Any chance to add the Pro Micro Board to OSX in the near future ?

Funny, I have projects using 98% of the 128K flash memory and they work well.

But I have also encontered a couple.chips that do not work on these same projects.
I thought it was because of fake chips, not defective ones :)

João

Go to advanced search