openrcforums

Right at the bottom of the first little section there is donate button. Erazz does a great job, Donors get their names in the text notes at the end of the code.! or at least they used to....


http://code.google.com/p/er9x/

Can you do something with that??

The AMA safety code reads “I will not fly my model aircraft higher than approximately 400 feet above ground level, when within three (3) miles of an airport without notifying the airport operator. " The last thing I want to do is start an argument about safe flying. But not only do we have the ...

AETR, TEAR, ARET etc, which I suspect is also allocating the channel to the function? This is a function of the templates application. When you select select one of the templates on a blank model, it applies a set of pre-applied mixes based on which template you choose. This is a little confusing b...

the 3 way selector for flaps (?) seems to dictate when differential throttle is switched on or not , Luke, Gyro will and should comment, but I believe that was so you could still put flaps activation on id1 if you want. REMEMBER-- you dont HAVE to use any switch for any pre-labeled use, or pre-conc...

Sweet, did you try it on the model yet??

And in engineering, its called "benchmarking"....its a much nicer term.!

OK, thanks, would one then need a 2nd 6 or 8 ch receiver in the model? + power to it I assume. What about the 2nd radio? Could you hack power and ppm signal to a seperate module and just mount it to the main radio, or would the close proximity of the antennas be an issue?

Think of how many foamies either scratch or kit or rtf.... or even quads, or helis you can put in your hanger by not buying that $2k radio.! + lots of batteries for all of them.!

Note that there is also a variant of the “Sticky Throttle Kill” included in this program. With two independent motors, you need a kill mix for each. Got it, ..... nevermind. DUH i feel dumb. Luke when you simulate his sweet mix, you first need to hit the THR button on the left side... top. Make it ...

I should have simulated it first, I don't really know how it works, I mean his mix. But I was wrong. You can either copy what he did to include your 2 throttle channels, or load his and save it as that your seaplane model then add the ail and ele where you want them. Gyro, when i simulate this, sele...

Hi luke, first, did you use eepe to do the interface work and flash your radio?? If so, click on gyro's diff thrust eepe file and save it to a known location, then open it in eepe. Then, compare how and where YOUR stuff is as far as, well should be similar I think aetr ail ele, throttle, rudder 1234...

Love it, thanks for posting Ted, I changed all the slows to 4, I like it slower like that. Hopefully I willl get to try it soon.

Guys, great work, I think. First, sorry to bother you, but could you describe, in laymans terms please, what one might do with the extra channels.? Is this only for the big fullhouse sailplane guys? or I guess what I mean is, whats the real world simple term application for this particular "exp...

Ted, can I make a suggestion, post the eeprom file from eepe. The file that you save in your pc, you can post it as an attachment. The the guys can look at it , heck they can change it for you, then re-post it and show you how to do it. If it can be done.

Didn't try alot of other stuff, but I do know that the videos on rcgroups work fine.

OK updated flash, no luck. Her machine just displays a large blank window where you put that video in the audio update thread. So ??? no clue.

Thanks Rob, just checked with daughter, yup, she said when she clicks on a video in facebook it says flash needs updating.

I will try.

My daughters laptop win7 ie9 for some reason, videos are not displaying at all in the forum posts here. Could it be that its because this is the first time to this site from this machine?? any ideas??

ghost, glad to see you made it over here.

Pat

and alls this on the base firmware.

If they mean stock 9x firmware, that might be more difficult to figure out.

blank


Was there supposed to be something there rob??

Minimum 1000 piece order/??? did you source it from a retailer, or do you work there or what. I have multiple 9x;s butI don't need a 1000 pots.!

Thanks

Pat

ha..... ironically funny there.!

Thanks for the replies guys, I was looking for more of a response like leo's like theories as to why we are seeing more of these. I'm more than familiar with the difference in the pads, Great pic though crucial, thats a great reference for those that are unboxing their new hotness.! Leo, not really ...

It just seems odd to me that all of the sudden after a couple thousand units sold, that they should be showing up with newer delivery dates, as a different configuration. I wonder if Steven has considered a change (as costly as that would be I doubt it) in his design as a result of the rash of so-ca...

Is the v1 term being mis-used? I wonder can anyone say what the other, if any, changes were made between the v1 main board and the v2 main board?? Could it be that there is just a tolerance error in that center solder pad, or maybe there were, or are, two different suppliers and one does it a little...

Also, would it be possible to post a video or maybe a mp3 of what it sounds like???

Just the piezo circut thingy that was posted.(just the cap inline

Can you drag the instructions for that over here please?

Thanks

Pat

Leo, you guys have done some great work on the FW side. Do you think you could put together a compilation, guide for dummies on the HARDWARE side? which module one would use, how and where to make the wire connections??? switch or no switch??? etc. There is already a new person asking in the scratch...

Hi Dean, and welcome. Her is a start for reading.... I am going to request a compilation post because there is a lot of info and updates after this post. Good start here though. Basically, you just remove the module from one of those cheap toy looking remotes that you get with a rtf ______ product w...