openrcforums

Sorry if I might asking in wrong topic.. I want to buy 4in1 multiprotocol module for my 9xrPro(s). Have any recommended version or something inportant what I have to give attention? I saw few brand but mostly looks all similar. One difference I recognised already, looks exist with or without Bind b...

MikeB wrote: ↑Mon May 11, 2020 8:58 am One other thing, please go to the SD Card menu and let me know what the number is at the right of the line that says "Present Yes". We would like to see 32.

Mike

Yes, that is what is there.

Fifth test version posted. I've even flashed the previous X10 test version to my X10S express and that doesn't generate the watchdog reboots you are seeing. This test version has a timer acting as the watchdog, so we get a high priority interrupt on watchdog timeout that saves 16 words from the sta...

MikeB wrote: ↑Sun May 10, 2020 3:06 pm The watchdog reset is not obviously coming from a specific interrupt. I'll need to add something to really try to pin down why/where the problem is.

Mike

OK thanks Mike I will wait for you to upload another test version.

I've posted another test version (Fourth). The X10 has the display mounted upside down compared to the X12. This requires the display driver code to turn everything upside down. It is possible I may have something wrong there that then causes something to be written to the wrong place in memory. I ...

MikeB wrote: ↑Sat May 09, 2020 2:52 pm Was that with the module disabled, the updated version, or both?

Mike

Both

MikeB wrote: ↑Sat May 09, 2020 1:41 pm Please try editing text with the internal module disabled.
I have posted an update.

Mike

It made no difference, The watchdog is < 0112.

Dave

eepskye doesn't read/write "EEPROM" on the X10/T16/X12 yet as they all use the SD card and it needs a different method to read/write the data, I'm working on it at present! Was there a particular button you pressed or operation you did when the watchdog happened? I'll post an update in a ...

eepskye doesn't read/write "EEPROM" on the X10/T16/X12 yet as they all use the SD card and it needs a different method to read/write the data, I'm working on it at present! Was there a particular button you pressed or operation you did when the watchdog happened? I'll post an update in a ...

I have put the erskyTx bootloader using the "maintenance mode", that was something that wasn't working on the first version. The text I am trying to edit was a model name and I got a watchdog < 98, then I attempted to add my name in the radio setup "general" menu and got a watchd...

I've posted a new test version. I found one thing that may be stopping the internal module from working. I assume when you attempt to bind the receivers do nothing? I've also enabled some code that tries to detect why a watchdog reset occurs. This usually happens when an interrupt routine never sto...

Hi Mike Some progress, the setting are being saved, I discovered that the SD card was not seating correctly and I am no longer getting the calibration screen when I power on the Tx. I have now calibrated the 6-pos switch. I cannot get any Rx to bind, I have tried a RX8R a S8R using XJT and a D8 usin...

Do you always get the calibration screen and battery charged screen at power on? Yes The system and model data are stored on the SD card, I assume you are operating with this in the Tx! Yes With the Rx, what RxNum are you using? Try using RxNum 0, and/or changing the RxNum to 0 after bind. When bin...

I have installed the version posted. I was unable to load erskytx via the bootloader menu so I did it using eepskye, the boot loader found the file on the SD card but when I highlighted it it would not load the firmware. The first item I noticed after powering on the radio is that the system display...

Mike, Some restrictions have been lifted here, and we are able to fly again, so I will be able to test this version as soon as you ready to build it for me. What effect will upgrading the iXJT firmware to 2.1 have on your build as I am considering upgrading all my equipment to this new version, as t...

I don't use linux other than to run a build of eepe/eepskye on lubuntu in a virtualbox, so I need a few hints. I've managed to get mint linux (18) installed in another virtualbox, so I can use that to test installing. I think I know what to do about it looking for qt4 files when it should be lookin...

That was the first error, after I installed the qt4 file the next error is in the attached file.

Dave

OK, I've posted a .deb file that might work! I don't use Linux normally, just have a copy of lubuntu that runs in a virtual box for me to do the builds with. Since I'm moving from QT4 to QT5, I had to work out how to make the build use QT5, it kept defaulting to QT4! Mike That is my problem with th...

On the erskyTx test versions thread I've just posted an update for eepskye for Linux. This should fix those two bugs. I've only posted the main executable, just unzip the file and replace the executable you already have. Let me know if you need the full installation. I have a build for the X10 OK. ...

I have not used eepskye for quite some time, and the version I was using is 422 with a date of 25th February 2018. It had a couple of minor problems with resizing windows but all the other functions I needed operated ok including the new model wizard which at some time prior to this version it did n...

Mike, I should have the X10S in my hands sometime this week so I will be able to start testing when you have a chance to build a version for it. There is no hurry for it, I know you have a lot of competing tasks on the go, and we are under a no flying regime for the foreseeable future. I have just m...

I would certainly be willing to test it for you. I have a multi module that I am using on my Q X7 so I could use that in the meantime. I will make him an offer for X10s as soon as he returns home. He is in isolation at the moment and is not due to come out for the next week or so. I will be in touch...

Is there a version of erskyTx that will run on the older X10s available. A friend has one that he no longer needs as he has upgraded his radio, and he has offered to sell me this radio. It currently has OpenTx on it and have no desire to learn to use it as I would rather stay using erskyTx. I notice...

Thanks Mike that would be great, just one less thing to not have to remember.

Thanks Mike, that was the problem, I had forgotten about the "Battery" menu. I have reminded him to reset this when he recharges the Tx battery.

I have just been asked to solve a low battery alarm on a 9xrPro. The Tx has a 3 cell LiPo battery and the voltage is showing 12.1V on the display and the low voltage alarm is set at 11.1V, but the low voltage warning is going continuously. How do I fix this.

Another cool feature that many of you might have missed. and I find it really helpful. Go to Radio Setup / General, and scroll down to "Mix Menu Details", and check it. IMG_20191027_182430.jpg Now go to your mixer menu and have a look :) You will now have most of the hidden information on...

Please read the title of this thread, he needs "Eepe" not "Eepskye" :) João Sent from my BLN-L21 using Tapatalk I read the title of the thread and in my first response to him I said that I had a copy of eepskye if that was of any use to him. As he responded that he would try it ...

You do not need to be root to start the program, you run it under your own user account account. I have attached a screen shot of the terminal output when I start the program. I cannot offer any information about the message you are getting as I have no idea how your system is configured, all I can ...

I am not sure what you are trying to do. What programmer are you referring too, you do not need to use any other device with eepskye other than your transmitter. If you copy the extracted program file to /usr/local/bin, you need to be root to do this, then you just run the program from the command l...