openrcforums

First I do apologize, because I got a false report in my previous post. I copied to both SD card the new r222d1 FW, but I was too much focusing on "voice mute" and actually I just flashed one of my radio, so when I tested this boot trouble I checked on the r222c8. Now I checked again and I...

I just tried this function first time now (on 222d1 FW), but until I hold those buttons just the backlite coming up and screen stay empty. After I released the buttons then boot screen coming up and transmitter start same loud than normally... To be honest I was happy to find this option, because so...

I followed this videos: https://youtu.be/w6aEq6qAXLs https://youtu.be/Qwi01ZlkJOc My hardware settings in the menu same as yours. Did you soldered the r22 ? I did the mod in my newest 9XR Pro and the resistor was fitted already, but my another 2 are probably older ( I bought them second hand) and th...

Yeah I know that. Anyway because in the U.K. that frequency used by another purposes, over of the legal/illegal reason our signal could be interfered and we can loose control of the model. So better buy a power meter and measuring the signal or just believe the power levels are exactly same..

Hi Mike, So I just did the quick check and looks working all function what we expected. The main results: 1. Frequency synchronizing between TX and RX : When select another frequency in the menu (example change from 915MHz to 868MHz) , than should "rebinding" the TX/RX, because that's how ...

Thank you Mike. I just going to home after 9pm, but will flash that and try.

J2-2 dont need resistor. That is a digital input.

I have 3pcs 9XR Pro and I'm happy to testing. Thank you Mike.

That's very good news. Thank you Mike.

Thank you Mike. I'll check tomorrow and later that bt scripts too, but my HC-05 modules should arrive before.

Update: I checked and working. Thanks.

hi budavaril I'm using the latest EU firmware on the TX/RX but telemetry is only on 25mw regards Hans Yeah. Unfortunately in latest EU firmware have this limit, but luckily there is the solution already: the "flex firmware" from Frsky website. They putted separate from the "normal&qu...

Hi Mike Just doing a bit more testing on the R9M and R9MM RX with the 9Xtreme (r222c2). I have found that with XJT protocol, I can get 16 channels at all power settings (unexpected ) but telemetry only at 25mw when bind is set to chans 1-8. Also I am able to select power levels of 200 and 500 in th...

Hi Mike, Is it normal behavior in c6-c7 if I have no SD card inserted and switch on the radio, the radio looks working, on the LCD screen I see the last telemetry layout, but can not go in to the menu because no response for any buttons? Before (r222b6) if SD wasn't inserted, I just lost the voice a...

MikeB wrote:Bug fixed in r222C6, now posted.

Mike

Thank you.

I made a voice pack today geared towards what I wanted. I wanted to share it. I used Cereproc.com Voices sound fantastic! I used Heather(english,Scottland). Any way here it is I have tested it on the radio everything works that I have been able to use so far. Ok I have to shorten some file names. I...

The possible solution is using R9M 868MHz or 915MHz. Different frequency bands, no interference. Finally can using bluetooth or WiFi without that limits before..(Example controlling remotely my GoPro using by it's own bult in hotspot or using ESP8266 WiFi telemetry on pixhawk or pixracer etc.) I thi...

Thank you Mike.

I just updated my 9xr pro from b6r222 to c5r222 and now when I switch off the transmitter, before shutting down I give that RX still on warning message. Even if no JR modul in the transmitter. With b6 I got this message just if my RX was connected and really forgot powered on. Sent from my SM-G920F ...

Thanks Mike. To be honest I'm confused a bit about how it works, because I see in Open TX coming up the new option "WORK BAND" in the menu, so we can choosing 868MHz or 915MHz from the software menu. https://www.youtube.com/watch?v=a-SESdu-qQM But how the RX follow that? If I change the fr...

I just received my R9M with EU FW. I see now exist the "flex" FW and supports to use the telemetry on all power levels (include the 100mW-1W auto) and can using EU or AU frequencies (868MHz or 915MHz) Shall I flash it ? Will it working with b226 b6 both frequency and power selection in the...

Same here. I have to copy my messages before hit the Submit button, sign in and paste-Submit quickly..

UK.London Win10 64bit Chrome.

Done. I worked 2 days on it, but now successful. The "X-loud" was much better, but still less volume than original (factory) files. I found on that website another "dynamic compressor" effect (drc) and that was a bit more understandable, but similar loud than "X-loud". ...

Wow... That's working. Thanks.
This way make sense to play with another SSML functions to try to make the best result for this "not really the best" speaker..
Thank you.

(Before ad After)

That's good news.. And a little bad news.. I checked that, but I'm afraid those things are very "advanced" to me... :roll: Unfortunately my limit much lower level than find how I can using this options in your software. I can modify text based config files (like config a Samba or Apache se...

First I have to say BIG Thanks about this tool to Caffeine. After nearly 3 years I found the right information here in the forums and on Youtube (thanks João) and finally I was able to change the firmware on my 9XR Pro. (Until now I used with r212 because I misunderstood and thought the 3position sw...