openrcforums

OK; I use the PRO with R219 and eepeskye; and I understand the "BT" option is OK for S-Bus frame. I'm not sure about COM2, is that the Futaba connector on the top ?

Michel

There is something strange: when I click "send S-Bus" I assume Eepe send a S-Bus frame, but the Tx expect a PPM frame ? how can it work ? Why don't you use the USB link, it would be easier ; another strange thing: when I open the models file in Eepe 418 and click on the top "preferenc...

Well, I now understand Eepe act like a slave in the trainer mode; I downloaded 2.19 FW and in the BT menu how I set the BT Role, Master or Slave ? When my PC detect the HC-05 it give me two COM ports, one COM-IN and one COM-OUT, which one to select, if I choose the COM-OUT in the model sim the soft ...

Thanks Mike, I'm afraid the 217 FW don't give that option: the BT menu give only "on" & "off" for BT as trainer and the trainer menu don't allow to set the mode.
Do I need to update ?

Michel

Well, I tried the BT link with my PRO and 217 fw, I guess the link between the PC and the Tx is good since HC05 is recognised but I get nothing when I click on "send Usb"; it seems some parameters are wrong: baudrate, trainer ?

Michel

Do you think I could use the FrSky S-Bus/4ch. decoder ? just to give it a try.

Michel

Jeti telemetry would be great ...

The JR standard need the pins protrude by 1/2" from the back of the module case.

Maybe Futaba is just too expensive !!!

I guess you run OpenTx ?

I just discovered this thread and I'm not sure to understand if it allow to control the servos direct from my PC through the BT connection with some BT Rx linked to the servos ?

Any chance to work with the Jetmunt Ecu ?

I can't use the V2 range of Orange Rxs on my gliders because there is no altimeter sensor; do you think it is possible to mod the old -analog- FrSky sensor to link with the volt input of the Orange Rx ?

more sexy design than the Horus...

Hi Mike,

What about designing a new telemetry module for the V2 Orange Rxs with such a range of sensors, today the Orange range is very poor...

Michel

I had this issue on the Ail. stick; I had to dismantle the stick, of course the pot was moving slightly.

I would like to have a flashing dot on the screen to warn when the data record is on; like on my sat receiver...

I use the one purchased from Aloft which work nice.

I spoke about the new telemetry module, the one designed for the Pro and its inside antenna; I opened the case and I saw this is basically the same as the one you told me except there are no dip-swiches, it can be set only by software, but not implemented today in ER9XR. Well, that does not a matter...

The new Orange/telemetry module is told to be Walkera compatible, how I can ewitch to tis mode ? and would it be compatible with a 2403 Tx ?

Sorry if this not the right thread...there is no info on HK site...

MP

I had some issues with the aileron stick: the cursor on the screen moved randomly; I disassembled the stick and inserted a bit of cleaning spray inside the pot. and now it works without failure...

Sorry, which one is the right for the FrSky Rxs ?

Michel

It seems the X8R measures internally the Rx voltage and display on A1, in that way it is different of the X6R which offer the choice to measure the pack voltage with the external A1 connector; is that true ? The notice don't give any info about that connector, essentially the max voltage it can acce...

I just wait for the Orange/Turnigy DSMX/telemetry module !!!

Thanks Mike, I ordered the Lemon telemetry...

MP

Hi Mike B,

I read what you told on Lemon thread about the futue Orange module designed for the PRO, will it be soon available ?

Regards

Michel

Maybe I'm wrong but it would be able to run the S-port linked sensors ? the datas would go to the pin 5 of XJT module ?

OK, good new.

MP

Thanks Mike, I assume it will use thé Pro anten na connector and telemetry datas go to pin 5 ?

How many channels will it drive ?

MP

LemonRx just claimed the availability of a new Rx with Spektrum telemetry capability; do you know if the expected Orange module for the Pro will be soon available and OpenTx take advantage of it ?

MP