openrcforums

Yes you can ask it here, but i will add this to the SP board thread, because this gets ask after getting all working. You set this in the radio setup. Long press of the left button then scroll down for the backlight settings :) You can use a timer, a switch or any thing. I use a switch. There are en...

1st pic is almost perfect. No need to unplug the cable. O and i was actually asking rc to take the picks


Sent from my iPhone using Tapatalk

Now could you please post a nice closeup of the cable and how it should be plugged in. I ask this for two reasons, 1st I can not do it, my board is older with other connector, and 2nd you are not the first one to make this mistake, and surely wont be the last. If you can post the picture (or even a ...

Crash_Jim wrote:I'm new to this stuff. I just flashed my 9x and love what you have done so far. I have a question.. One of the other guys verions has added a SD card mod. Are you planning on doing that in the future?

Yes, actually already done sort of, check this topic for more info

Most certainly NOT. Never short the +5V to ground, that is why I said remove the clips, they can easily short out the supply. To test the BL Steven said that pin +5v and VDD should be linked, but before that test I would recommend we 1st see the usbasp show up in Windows.

wow expensive, but will test it to see

Tested and working, For info, add some one as friend before you can chat.

If i get a frsky telemetry module and rx out of the deal for testing and reviewing I have no problem with it. Would love to have one to see if I can get multiwii setup info displayed on my er9x via the serial link they have back from the rx :) We are so used to advertisements on the net that a small...

Ermmm .... Your images may only be up to 600 pixels wide.
And this when I wanted to edit a previous post of mine with pictures in it ...

Ok the video was not that helpful, because it is out of focus, but at least from here I can give you some advice. Those clips are not save at all, they will easily make a nice big fat short. So What I will sugest is the following. Remove the crocodile clips !!!! 1 disconnect the Back light from the ...

I personally do not believe in lots of rules and regulations, but just a few things to keep the forums nice and useful. (I hope Rob agrees on the below) This is not my Forum, but please note to keep every thing nice and in place, duble postings will be frowned upon and might be removed. Post not fit...

Post a picture of how you have in connected. no need for a new cable just yet.
You ma have the connections wrong, so if possible A picture showing the small usb board to the big board and how it is plugged in.

No, you can test the board before installing, Stevens guide is the one to follow, but you can only get to the point in eepe were you get the avrdude error like below ================================================================================= avrdude.exe: error: programm enable: target doesn't ...

And this was caused by RCG forum where you could not post the attached picture inline.... Well you could but not easily. Uploading the image in the forum is imho better than linking outside.

yes, I have added it now to the post, but by adding a .zip to it, see here

Stil the same thing, I get The extension dmg is not allowed. after 100% upload.

thanks :) I'm a bit ahead of you on that one. I tried using the device manager to install it but there is no .inf file in the driver download folder. I dl'd a couple more times to be sure. so i dl'd this... http://www.protostack.com/blog/2011/05/usbasp-driver-for-windows-7-and-windows-vista-x64/ I ...

I think there is still a small problem with the .dmg file ....they are fairly big, 2,8Mb on disk. Upload runs to 100% but does not attach to the post. could be size limit. You can test with the file from my site. (link is in the eepe topic)

PS are you aware of the current time ?

It was only copy paste for now .... will update it some time soon(ish)

Can you add strikeout in the forum (for editing of post it is very handy when someone can read wat was said before, not just see nothing)

It's a work in progress ...May things needs to be added still. Once it is all done I will most probably edit this post, or remove it completely :) Help is appreciated and if you think I have left out any thing feel free to post it here. Once the forums are running and most info is here we can go alo...

Reserved

Can you add .dmg also please (just for the mac precompiled eepe, then I don't have to link to my site)

So you have ordered a SmartieParts board from Steven, now to get it working. In most cases the installation goes without problems and is pretty straight forward. If however you don't get it working right away then this is where you will find the answers. Most problems is caused by driver installatio...

Reserved

Groot

Update New version is build and passed to erazz for uploading. This is now a installer, and will install eepe in Applications folder. Avrdude will also be installed. If you feel at any time the eepe build is old compared to Windowzzz feel free to PM or email me I have created a installer and it is ...

Tested and working. Hopefully now the anti spam will start to trust me

'it' is hard work and extra low pay
And if you think I make to many changes feel free to slap me over the fingers

I'm Here for what it's worth ...and willing to help

Merged some of the congrats and wel done post into here, think they belong here

Groot