openrcforums

I was attempting to flash the firmware but I am not know what firmware it was ,I do believe that I was in the Bootloader mode.With the Taranis connected to my laptop which it a MacBook Air and I was running OpenTX Companion.

I was checking for new firmware and now the taranis X9D radio will not turn on ie: the screen is blank also if I try to switch on in the boot loader mode I get the same blank screen!

OK thanks a lot!

My question is how do I back up the radio firmware to the SD card.

I was reading the Taranis Plus user manual for Open TX 2,1. On page 44 Backing up the Radio Firmware,Note:Many pilots place a copy of their firmware .bin file in the FIRMWARES folder of the SD card to guard against disaster when Companion is not available . My radio is a Taranis X9D and I am using C...

I have changed thread to 'Open TX'

OK openTX Then!

I have two McBook Air laptops ,I have dowloaded Companion 9x to both the icons Check for Updates & About (icons) are missing from the McBook Air that I downloaded Companion 9x second. Is this correct?

Problem overcome ,I have now got the models that are in my Taranis saved to my McBook air ,and they appear in Companion but I do not have any way of knowing how I managed to do this?

I am OpenTX Companion Firmware version 2.1.9
And my McBook air is on version masOS10.12.6.

When I open companion on my McBook air there are no models visible .The only way I can get the models that are on my Taranis to appear is to connect my Taranis to my Mac are then read the models from my radio, but when I try to save the models to Companion I get a massage telling that the file is re...

I have downloaded Companion9x to my McBook air successfully .
But when I try to save anything ,I can can not save it.I get a message that it is read only and it is not saved!

Thanks could you please tell me how to choose the right setting to allow all apps on my McBook air.
I am very new to apple so please be tell all the steps.

Has any one uploaded companion9x on to a McBook air?
I know there is a link to down load it on companion site.
When you try to do this download it well not download because you can only download to a McBook air or any apple computer from a apple app.

There is no apple app to down load it

As any one successfully downloaded opentx companion to a Apple MacBook air ?

I would like to do a Tx companion backup so I can roll back if required .
How do I do this Tx companion backup,is the backup done on my computer if so please can you tell me how to do it?

Thanks . Am I correct in my assumption that this 2.2 Firmwares can be used on my Taranis radio?

For Taranis radio is 2.2 better than 2.1 for a none plus Taranis radio ?

Is Open TX Companion 2.2.0 suitable to use with a Taranis X9D Transmitter ?

I do have a SD card reader socket on my PC ! But I still do not know how to do this way!

Thanks a lot! Could you please then tell me how do I Copy my SD card contents to PC,format,then put contents back.
I do not have a lot of computer knowledge. Is the Copying done with the SD card in Taranis through Open TX?

I see that sounds are on the SD card but the sounds are there as they should be most of the time , it is only the odd time that I turn on my radio that have no sounds!

I do not think it is anything to do with the SD card contents because sometimes times when I turn on my radio I have sounds and sometimes I do not have any sounds but if I try again I do have sounds!

On my Taranis original radio ,firmware version 2.1.9 variant 217. When I turn on my Taranis there be welcome sound and also an announcement telling me what position the switches that I have set are in ,also when I move the trim switches it tells me when the trims are in the centre position ,but some...

I have flashed my new start screen to my Taranis now!

I have created a new Taranis start screen in open tx,how do I transfer the start screen to become my start screen on my ordinal type Taranis radio?

When I connect the Taranis I only see one drive appear which is the TARANIS SD (F:) Sorry there is also a drive TARANIS (G:) when I connect the Taranis when I open this up there are 2 folders EEPROM BIN_FILE AND FIRMWARE BIN_FILE. When I click on the eeprom file and open it Open TX Companion opening...

Is this file on my radio ,within Open TX Companion or within my Computer? When I start up my Taranis and go to the SD -HC CARD screen (EEPROMS) I see all the eeproms I have saved! Could you please give me more information about what I have to do? If I hold the trims to the centre and switch on my Ta...

I have a original Taranis ,when I open tx companion and start my Taranis by pressing inwards on the horizontal trim levers while switching on the tx,and connecting the Taranis to my computer . Then I click read models and settings from radio. I get a blank document 2 eepe (FlySky Taranis) Screen , n...

Fixed