openrcforums

Hi mstrens, thanx. Now it is finish for today.

I'll go through your advises tomorrow morning and for sure there will be more of my stupid question.

Thinking of connection a current sensor. Somewhere her in my mess there should be a 5A and a 20A sensor. Should do for a demonstration ...

br KH

M-Link support in v3 looks really good! Disconnected my frsky rx and connected m-link rx. Put my hand on the oXs_config.h and got this result. 5.jpg #3,#4 and #8,#9and #10 make sense. MS 5611 lying on my desk here, 3S lipo is on storage. But #7 is showing nothing. It is for sure my mistake. Using th...

@mstrens. We will have M-Link supported in the next GUI?

Hi João. As I can not understand, that there is not much response in German rc forums about openXsensor, I started a thread in rcline. http://www.rclineforum.de/forum/board49-zubeh%C3%B6r-elektronik-usw/board50-fernsteuerungen-und-telemetrie/311808-openxsenor/index2.html Hoping to get more people in...

Hi mstrens.

THAT EXPLAINS IT!!

Thanx a lot - KH

... if your Arduino is correctly powered (>5V), I recommend you use VCC reference, it should be more accurate... and you can omit the divider for the 1st cell ... Klaus Hi Klaus. That is not the point. The issue is, that the Conf GUI ist telling me, it generated a new config file (time stamp), but ...

Try to be a big more specific :) I have a preset file vario_volt1.ser.zip in openXsensor Configurator 2.1. The oXs_config.h in openXsensor_v2.5 with time stamp 17.jpg has those values #define OFFSET_1 117 // offset in mV #define MVOLT_PER_STEP_1 4.58 #define OFFSET_2 252 // offset in mV #define MVOL...

@davx.

Could it be, that I found a small issue with OpenXsensor Configurator 2.1 in combination with openXsensor_v2.5?

OFFSET was changed, but NOT DIVIDER ... Not a big thing, can do it manually.
br KH

João, I did clear up the area of the photo, but you don't see what is right or left of the pic ...

br

I seem to forget to do things as I age :lol: :lol: Same here John ... :mrgreen: Got my spare SD card from ebay. Those "small" SD cards are not around anymore. br from Germany - KH PS. About SD card size. Found that http://www.rcgroups.com/forums/showthread.php?t=1913902 -> posting #11 and...

So, just plugged things together here. MS 5611 sensor, arduino uno and a MPX RX-7 M-Link. Used your last code. Did not make any adjustments. Looks good :) Values on address 3, 5 and 6 Value on address 6 changes, when raising and lowering the MS 5611. TX beeps. DSCF3685.JPG DSCF3684.JPG br KH - Have ...

John, might be a good idea to use the sd formatter.

http://open-txu.org/sd-formatter-4-0-for-sdsdhcsdxc/

br KH

John, my mistake, you are right. ^M is NOT the reason. Put your unaltered txt file here in the sim. It's OK so ... sorry. Was guessing and did not do that test before. 8.jpg Besides, we have a German Taranis manual and it says SD card 1 - 2 GB. (Mine came with a 1 GB card and I have a spare 2 GB.) 9...

Try this one

Hello John.

Loaded your text file from rcgroups and unpacked it.

Put it on my linux machine and displayed it with midnight commander.
Then I took one of my text files from my Taranis and here you can see it
Spot the difference?

br

That is the result. A 3S Lipo in storage condition. DSCF3607.JPG How do I calculate the divider factor on the voltage screen in Configurator? From oXs_config_description.h * If this seems too complex, just use 2 voltages as different as possible (but in the range of the normal values you want to mea...

aduncan wrote:I have spent hours on this forum, but can't find a definitive answer. Is it possible to get the voltage from a 3 cell lipo, and send it to a Taranis.

My settings VARIO and 3S Lipo

Worked last year and should work now.

br

Have, at the moment, 4 small item separately on the way somewhere between China and Germany.

Lets hope the best ....

Meanwhile we learn, that there are people around here in Europe, who keep a Kalashnikov in the cupboard

Elthi wrote: So do Taranis manual may be useful for 9XR pro?

A lot of things are the nearly identical ...

Go through the settings of your Taranis and check all basic settings according to that lesson on opentx university.

http://open-txu.org/home/undergraduate- ... dio-setup/

Meanwhile you could use earplugs

br

Hi all, Yesterday I installed OpenTX 2.0.13 on 9xr pro, where can I find manual for this version? Thanks A manual for that version? That is a real big wish. Man, this is open source! What is available is a list of the changes in specific releases https://github.com/opentx/opentx/releases If you can...

Someone at customs had a bad day.

Tough luck!

br KH

It seems that the boatloader is corrupt.... Andy. There are TWO bootloaders! Take a deep breath and start reading. -> opentx university. AND DON'T MISS THAT PAGE!! http://open-txu.org/home/special-interests/curing-a-bricked-taranis/ And you might put your Taranis away for a while. It is not a good ...

Only an information João

I am not buying it either! But take a look here https://www.youtube.com/watch?v=CbnAPfpfCA8

~8:30 - the display and the menu. Just amazing!

br KH

It is available now in the European warehouse.

http://www.hobbyking.com/hobbyking/stor ... de_1_.html

Kilrah, thank you very much. I'll do my best

Flashing utility for the *.dfu file is here -> http://www.frsky-rc.com/download/view.p ... anis%20X9D

As long as IT can be flashed, it's OK .....

Mike, and what would you describe that here (Taranis Plus Official Firmware)

http://www.frsky-rc.com/download/view.p ... X9D%20Plus

br KH

http://lmgtfy.com/?q=taranis+wrong+firmware

There is a lot of information around ....

http://open-txu.org/home/special-intere ... d-taranis/