openrcforums

https://helihack.co.uk/poles

Have a look in that code here.

https://github.com/openXsensor/openXsen ... penXsensor

Specially in the files oXs_gps.cpp and oXs_gps.h

Might help

br KH

Hi, I am using openTX on Taranis X9D and X9D+. This is a demonstrator for testing the functionality of arduplane with Matek F405-STD, https://imgur.com/nqWzgcwl.png but for my planes I use CC3D revolution mini, because they are smaller and come with a MS5611 baro and a magnetometer on board and have...

Hi Mike, ENGEL is Premier Dealer Germany and runs that support forum. oXs ist NOT FrSky, so there is not much there about oXs in conjunction with FrSky. But the question come up in that forum and 6 users answered, no issue experienced with Archer RX. Personally I can not say anything about the quest...

There is a thread in a German FrSky forum about this.
https://frsky-forum.de/index.php?threa ... C3%A4nger/
And it seems, there are no issues.

br KH

Forgot about the common ground, in my prototype, I used the 5V from the USB to power the Arduino and a receiver battery in the receiver. with the actual build, the receiver battery (6V) will power the Arduino. I didn't think the configurator worked with the newer versions of oXs, also I assume it i...

Had a short look at 'oXs setup.jpg' Where is the common ground cable between arduino and MPX RX? Only see a single signal cable to arduino pin 4. By the way, for such simple things like a vario, it is easier to use the oXs configurator. :mrgreen: Generates in your case oXs_config_basic.h #ifndef OXS...

1. Maybe a pic, what you are soldering together, would be helpful. 2. Check the Uno R3 + BMP 280 combination with a simple sketch https://www.google.com/search?q=arduino+bmp280+i2c+example&source=hp&ei=QP-hYMOiIeqK9u8PyrmJyAY&iflsig=AINFCbYAAAAAYKINUGqpUoZCPz7NXtpVQ7jL6y06ctqK&oq=ard...

I have Multiplex voltage sensors, do you know if I can connect the oXs Vario and the Multiplex voltage sensor at the same time? That are 2 oXs working together ... https://imgur.com/bC68BXCl.png I await the arrival of the BMP280 then I will build a prototype with an Arduino UNO to test things out b...

#1 you need this here https://www.arduino.cc/en/Main/Software& And there are many tutorials on the net, how to install and use the IDE. Get accustomed to Arduino and do some small projects like a blinking LED etc. When you are done with that and still feel happy #2 download the code from here ht...

Maybe he lost interest in oXs, maybe for him oXs is finished?



br KH

I would make a test with splitting the sensors up on two Arduinos. Bildschirmfoto_2021-03-26_08-22-26.jpg The upper oXs has current and voltage and the lower one vario and gps. Right side is the connector. So I was flexible with the sensors. Could fly with only a vario, could plug in the gps or only...

You could use google ;) https://www.google.com/search?client=firefox-b-e&ei=oDxGYLaOMou-UvL_vNgL&q=hmc5883l-magnetometer-calibration&oq=hmc5883l-magnetometer-calibration&gs_lcp=Cgdnd3Mtd2l6EAMyBAgAEB46BwgAEEcQsAM6BAgAEAo6CggAELEDEIMBEApQkdINWP3iDWCi6Q1oAnACeAKAAcABiAHjBZIBAzEuNZgBAKA...

Tell us, which openTX version is now installed and we can answer your question.

br KH

Nesan, the general oXs files from here

https://github.com/openXsensor/openXsensor

and the two configuration files from here

https://openrcforums.com/forum/viewtopi ... 73#p152928

cu KH

Simply I don't know how ...

GY-86 works here and I did not read about issues in other forums about oXs and GY-86.

And here is also nothing to be found.

https://github.com/openXsensor/openXsensor/issues.

cu KH

Seen this thread?

https://openrcforums.com/forum/viewtopi ... 86&t=12169

cu KH

kalle123 wrote: ↑Sat Jan 23, 2021 7:38 am By the way. why not use GY-63 in combination with GY-521?

I am waiting with you

br KH

"MPU6050_raw" and "MPU6050_DMP6" sketches Link to those sketches please. "MPU6050_raw" doesn't say anything to me and "MPU6050_DMP6", I find something, but is that the sketch, you are using? By the way. why not use GY-63 in combination with GY-521? Has the ad...

Nesan, to my knowledge Arduino IDE and oXs ships with all the necessary files. (I am using Arduino IDE1.8.13 and oXs 8.2.15, but it also worked with earlier versions ....) About your GY-86. I don't have it on the table here, so don't ask me. The GY-86 is available locally here in Germany (~20€) and ...

Nesan, so, made a short test here. ;) https://imgur.com/UD8JoRGl.png GY-86 to Arduino Uno. I skiped the 'voltage things' in your configuration. You have VOLTAGE YES // ***** 6.2 - Voltage parameters ***** see oXs_config_advanced.h for additionnal parameters when YES #define ARDUINO_MEASURES_VOLTAGES...

Have a look at

https://ardupilot.org/copter/docs/commo ... -us42.html

Ardupilot is using this device and the code is open ...

cu KH

You should also post both config files as attachment ...

oXs_config_basic.h and oXs_config_advanced.h

br KH

Hi. This here shows a bit of my 'standard' oXs. IMG_20210116_193421.jpg RX, oXs with MS5611 and an ACS712-20A current sensor., placed between battery and controller. There is a distance between current sensor and oXs, so I can place the oXs with the baro in a more 'quieter' place. There are 4 wires ...

Good to hear, it is OK now

I tested cell voltage years ago, but never used it in real.

https://openrcforums.com/forum/viewtopi ... 603#p91691

Total voltage is sufficient for me.

br KH

Loaded the two config files from your first post.

Inserted those here, flashed the code to an Arduino uno, activated 'debug' and that is, what I see



That looks ok.

cu KH

OK.

Attach both config files here and I will try....

cu KH

Sorry, my fault. The manual says **** 2.1 FrSKY protocol (SPORT and HUB ) ************************************************************************************ * Measurements being automatically transmitted are : * - Relative altitude(cm), main vertical Speed(cm/sec) (when at least first baro sensor ...

#define USE_INTERNAL_REFERENCE // uncomment this line if you use 1.1 volt internal reference instead of Vcc ([b][u]voltage divider must be used to reduce voltages to 1.1 volt max[/u][/b]) You think, it is wise to measure voltages up to 4.25V with the 1.1V ref set on Arduino analog ports A0 - A3? Do...

At least Galileo shows up in oXs_gps.cpp // Here the code to activate galileo sat. (This has not yet been tested and is based on I-NAV code) 0xB5,0x62,0x06,0x3E, 0x3C, 0x00, // GNSS + number of bytes= 60 dec = 003C in HEx 0x00, 0x00, 0x20, 0x07, // GNSS / min / max / enable 0x00, 0x08, 0x10, 0x00, 0...