openrcforums

Mike, SPLASH SCREEN TICK BOX! If you remove the splash screen, the model image disappears on power-cycle! checked and confirmed. somehow connected to the Splash Screen. regards, ozphoenix Mike, I just turned the Splash Screen and the Splash Name and the Welcome Type to System and it appears that the...

Mike, I just turned the Splash Screen and the Splash Name and the Welcome Type to System and it appears that the image remains across the power-cycle! Give me 5 minutes to do some more testing and I will confirm that, to be sure, and will try to determine which one is related to the disappearing ima...

I have the flash screen and flash name and Welcome type turned off at the moment. But, when I do have either of them turned on, I do not have any custom stuff, just what comes with the Ersky9x default. I did have the default brightness set to 0% rather than 100%, I just tested it, so I have now fixe...

Mike,
Just FYI and as a reminder re: lost model image - moving around between models (changing to another model and going back to the first model) doesn't seem to lose the image - it's just disappearing across a power-cycle, it seems.

Edit: I may have the default brightness wrong, hence the black screen when you tried with "blank" SD cards. The "fiddle" to set the brightness may have worked! When I had the cards with only the two folders on them, I tried using the button-press sequence you gave me to adjust t...

Good Morning, Mike, Power the radio on in bootloader mode, then press EXIT (PgDn) long to restart. Does the model image now appear? Tried this - no, the model image (which was present before I powered the radio off) is missing once the radio starts, using this method. Regards, ozphoenix Thank you fo...

Good Morning Mike! I have managed to get the following: 1GB micro-SD (used) - removed all files, did a quick format, copied existing 2 folders of models & images from a saved image of my QX7 Esrky9x micro-SD 4GB micro-SD (removed from my working 9XRPro) - removed all files, copied existing 2 fol...

Mike,
Working with a range of micro-SD cards- will post results shortly.
Regards,
ozphoenix

Go to bed, you workaholic! It can wait

MikeB wrote: ↑Mon Mar 04, 2019 1:37 am I'll try to add some more debug (later today, it's 01:34!), it read 59 of the 64 lines of the image.

I have changing the text colour pretty well working.

Mike

Aaargh! Wrong chip package size - time to start again in the search :( My chip and spare arrived yesterday - hopefully, I can pass them along to my clubmate to make the change in the next week. Will give feedback on the success or failure, once that is done. Found some chips (locally in Oz -1 week b...

I duplicated the error with the last but one version and the error messages are as originally posted but the BOOT REASON number is now 98, not 96 - not sure if that means anything. The Cluster size shows '0'. The DEBUG values are: 0001 0002 0009 0000 0005 2000 4588 0001 2000 4588 0001 Slightly diffe...

Ok, will be home in about 45 minutes and can test the new version and post results asap. That debug is odd, it indicates an error code of 9 occurring when there are 9 lines of the image left to read! But the debug showing why the error code is 9 suggests there is no error. I've posted a new test ver...

Duplicate post, thanks to phone app - deleted.

Hi Mike, Got it. SD Card Status when image failed to load showed Cluster Size 32 this time. Debug page info: 0001 0002 0009 0000 0009 2000 4588 0001 2000 4588 0001 (yes, same info again) On scrolling, got WATCHDOG restart (image had also disappeared again, after being re-inserted). Last BOOT REASON ...

No, sorry - searched high and low - only 32GB in other devices (even found one 'bad' micro-SD in one old device - will have to get a new one for that!). Found several 4GB standard size SD cards (not micro-SD). I'll have to get my 9XRPro back on Tuesday (it'll be repaired tomorrow sometime) or buy a ...

I'll keep digging around to find a spare SD tonight, but I don't think I have one. Just for info, I took the 32GB SD from my QX7, which has been in use now for about 12 months and has the same image files and models on it and has been working flawlessly in the QX7, and put it in the X12S and scrolle...

Good Morning, Mike! Understood, on the '6' and '60'. Do you mean that you have actually had the restart happen to you? Having it happen, however, has enabled me to locate a small bug elsewhere. I have only the internal RF at present, so I've turned that off. Still got the file list scroll restart. T...

As I mentioned earlier, I don't want to detract from the main purpose (getting ESky9x stable on the X12S) but this part is relevant now, I think -- I have to stress that I do not prefer 'form' over 'function' and I strongly believe that the technical merits of ErSky9x should be considered paramount ...

Mike, 1. A digit '6' appears in the Default Sw. line after the letter 'G' and the number '60' now appears at the end of the switch position row in the 'H' position -- intentional? 2. The Tiggie image still disappears across a power-cycle - the numbers on the debug screen are: 0001 0002 0000 0009 000...

Well, we got about 2 hours of flying then saw a huge rain front on the radar about 10 minutes away, so there was a scramble to pack up the tent/canopy area and tables and shut down the site shed :( But, it was enough for a few guys to fly and for me to fly a new (used) Sonic64 EDF wing and a few oth...

Hi Mike, Got it. When the image disappears, the three values on the fourth line are: one rapidly incrementing hex, then 0009, then 0000. When I get snow lines then a video reset because of scrolling the wheel, the BOOT REASON is WATCHDOG (again 0098) and the values on the fourth line are 011A 0144 0...

Hi Mike, Just FYI and FWIW: I spent a total of about 1.5-2.0 hours today using the radio in OpenTX, to understand what I might like and not like about the way that information is portrayed and presented (versus ErSky9x) and to give the hardware a fairly good thrashing around various screens. I will ...

Look back through the posts, kilrah - I have been supplying Mike with photos, where appropriate. So far, neither he (it seems) nor I have felt the need for additional videos, but I'm happy to supply them if Mike is not able to visualise the scenario, of course. I can try to second-guess what he migh...

Hi Mike, FYI: Just now was scrolling through some models on the RESTORE Model list, caused a snow job. Used T6 -- it DOES NOT remove the snow lines, once they have appeared -- the screen flashes black and then returns, but it has the 'snow lines' still present, unchanged. Further FYI: I immediately ...

Just edited my last post with added information (about T6).

Mike, The image consistently fails to load across a power-cycle, as before (Telemetry screen). The last two numbers on the line of the Debug Menu are: 0001 0002 EDIT: Haven't had 'snow lines' just yet, but did confirm that the T6 control re-establishes display and returns the 'missing' image to the ...

Ok. In the middle of something right now, but will do these tests shortly - look for some feedback when you get up tomorrow :) Late here, but I've just posted a new test version. If the display go "snowy", use the T6 control, pressing it down (towards the slider below). This re-initialises...

BTW and FWIW - OpenTX is actually written on the same SD card as I am using for ErSky9x (and OpenTX has not reported any problems with the SD card, so far). I checked for any file name conflicts (none) and found it easier to leave the same SD card in place while I was trying various things. I just r...

I also had the thought about bad hardware but obviously cannot get a definitive answer from the seller, who is a stranger to me and remotely located - he stated that he bought it for flying drones, didn't like the drones, went back to flying jets with a Spektrum. I have been intermittently trying Op...

Just verified this four times in a row - do nothing else in between the steps - have the Custom Telemetry screen displayed but make sure that a plane image is already in the box, then do a power-cycle. My image disappears every time. Go to Model General page, select the plane image file, verify it s...