Search found 467 matches
- Sat Apr 01, 2017 9:31 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
With the Deviation firmware on my 7E, the tiny whoop clones like the cheap E010 (not the ones bind n fly with DSMX or FrSky receivers with the naked fcb's and FPV cameras already on them that are very near the Inductrix originals) and the H36's that use the NRF24L01, they do rebind on every power up...
- Sat Apr 01, 2017 5:50 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Nothing wrong with burning nitro! I have to find a reasonably priced replacement for my Aeolus 50 sometime. Shame they went out of production. Nice 600 class 0.50 sized heli.
- Sat Apr 01, 2017 5:14 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Haha! I have a couple of the JJRC H36's on the way for my two girls. I like the 'ducted' props - much safer than the CX10's they have virtually destroyed! For a tenner a piece has to be worth it! Only thing is it means getting another Devo 7E or they will squabble like hell if one has to use the sta...
- Sat Apr 01, 2017 4:42 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
I was not intending to get one. Already have all the things it does in my little Devo7E.
- Sat Apr 01, 2017 3:54 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Missed that one. As I've only modified an AR9X board, this is getting ticked correctly for me. I've just posted a test version for SKY/AR9X only that sould fix that. tedbmoss: I've also posted a copy of eepskye that should fix the model copy problem for the 9Xtreme. Mike. Outstanding Mike. Confirme...
- Sat Apr 01, 2017 2:47 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Mike, I have found an oddity with test ver.C7 on my SAM4 chipped Sky Rev.B1 board that could be the copro/date/time setting issue. When checking Radio Setup > version, it shows as MOD REVB, but no copro info on the screen. I booted in hardware screen avail. mode and the board is default ticked as an...
- Fri Mar 31, 2017 9:43 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Yes battery connected as before. But menu long does not set time etc.
I recall similar from a long time ago, but cannot recall the remedy.
No probs on the Horus, but you are welcome to mine anytime.
I recall similar from a long time ago, but cannot recall the remedy.
No probs on the Horus, but you are welcome to mine anytime.
- Fri Mar 31, 2017 7:53 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Not unless you have AFHDS2A telemetry running on Multi. RCHH: To use SAM-BA again, having flashed the code once, plug in the USB, hold the TRN switch on then power on. This starts you in the SAM-BA bootloader. Mike. Done C7 for the Sky9X Rev.B board Mike. The only thing I have yet to do is set date...
- Fri Mar 31, 2017 4:11 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Ah but your 9X is far more advanced than mine. I don't even have a rotary enc. and I only have one extra 3-way switch. You have got your one fully loaded! Heh heh!
Still prefer the 9X to my Horus though anyday of the week, which rarely sees light of day. No ErSky9X for it you see ... lol!
Still prefer the 9X to my Horus though anyday of the week, which rarely sees light of day. No ErSky9X for it you see ... lol!
- Fri Mar 31, 2017 2:39 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Have now both Sky9X Rev.B and AR9X boards running fine with the SAM4 Mike.
- Fri Mar 31, 2017 11:25 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
I just checked it at Farnell, for ordes below 55€ they are charging 5,95€, above it is free. But I couldn't find the "at91sam4s8- ek ", only the before mentioned "- au version. Regards Ralf /edit: and even not at Mouser or Digikey You do need the -AU version as Mike linked to. Both M...
- Thu Mar 30, 2017 11:49 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
- Thu Mar 30, 2017 11:44 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
How did you solder the chip? Soldering iron or hot air? Or something else? ;) Quite expensive the chips here, at least where I have been looking :( João Hot air to remove, soldering iron back on. I bought four chips that worked out at just over £6 each, as there was a small order handling charge.
- Thu Mar 30, 2017 11:11 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
I have SAM-BA from 2.10 up to 2.16 and am not seeing the 'at91sam4s-ek' board listed Mike. Closest I see is 'at91sam4s4-ek'
- Thu Mar 30, 2017 11:02 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
See above Mike. Faulty USB cable. The soldering was fine all along.
- Thu Mar 30, 2017 10:40 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Mine has a problem in that it is not showing in USB devices yet. Will need to check all the legs on the MCU to make sure no bridges/dry joints.
EDIT:
Scrub the above checking the MCU. It was fine. I used a brand new USB cable - urns out it is faulty. GRRRR!!!!
EDIT:
Scrub the above checking the MCU. It was fine. I used a brand new USB cable - urns out it is faulty. GRRRR!!!!
- Thu Mar 30, 2017 7:30 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Ya beat me Mike! Just finished soldering! But no chipquik here so I had to go careful. Plus I was hunting out my board heater from the safe place I put it where of course I forgot about! Haha!
- Thu Mar 30, 2017 5:20 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Progress... progress ... progress .. heh heh!
Horus sized screen? :p
Horus sized screen? :p
- Thu Mar 30, 2017 2:37 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Ooooooo LUA script .... yes please!
- Thu Mar 30, 2017 1:14 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
I am thinking the same here. Ar9X first I reckon and try that one, as if it goes pear shaped I can get another. Sky boards are as rare as chickens teeth, and I could not do without one. Just out of curiosity, with the chip upgrade, what are the possibilities for features with ErSky9X in the future? ...
- Thu Mar 30, 2017 12:22 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
- Thu Mar 30, 2017 11:07 am
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
dear god... where has this been all my life... i just watched the "ChipQuik SMD removal procedure" video on youtube... https://www.youtube.com/watch?v=H0m_d52m1DU if it works half as well in real life as it does in the video, i have half a dozen "fixes" for other r/c things i wa...
- Wed Mar 29, 2017 9:53 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
- Wed Mar 29, 2017 9:43 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
ChipQuik! I have mine ready! Mike. dear god... where has this been all my life... i just watched the "ChipQuik SMD removal procedure" video on youtube... https://www.youtube.com/watch?v=H0m_d52m1DU if it works half as well in real life as it does in the video, i have half a dozen "fi...
- Wed Mar 29, 2017 9:35 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
Got ya. Solder/flux paste combined. I do have some I bought from eBay back along that is not half bad at all. Will find out what it is exactly for you.
- Wed Mar 29, 2017 6:48 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
If you mean just flux, rather than solder/flux paste, use TK83 'no clean' flux - years old but it is good stuff. Cheap enough on eBay.
I have no idea what paste I use, as I acquired a big dollop of it from my old works. It is very high quality though, that I do know.
I have no idea what paste I use, as I acquired a big dollop of it from my old works. It is very high quality though, that I do know.
- Wed Mar 29, 2017 5:49 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
- Wed Mar 29, 2017 5:36 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
That's the stuff!
Also of almost invaluable use are paste stencils. Just the right amout of solder gunk in the right places really ends up with perfect bonds. No bridges, no dry joints ...
Just have to find the little box of them I acquired .. ahem!
Also of almost invaluable use are paste stencils. Just the right amout of solder gunk in the right places really ends up with perfect bonds. No bridges, no dry joints ...
Just have to find the little box of them I acquired .. ahem!
- Wed Mar 29, 2017 5:14 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
It is not too bad soldering the blighters back on. A nice smooth slightly rounded tip and solder paste does well. The awkward bit with a soldering iron is getting them off. More than once (in a previous assembly/rework life) with LQF packages I have thought all the legs were free only to end up with...
- Wed Mar 29, 2017 3:46 pm
- Forum: erskyTx (was ersky9x)
- Topic: ERSKY9X Coding
- Replies: 4540
- Views: 1973924
Re: ERSKY9X Coding
At least it will be an easier job than the Devo7E - much more room to manouver on the 9X boards ...