Search found 1476 matches

by Daedalus66
Tue Jun 11, 2019 5:09 pm
Forum: er9x
Topic: Comeback
Replies: 40
Views: 2407

Re: Comeback

ERSky9x was developed specifically for the Sky board, as the name implies. Mike B was the developer and still supports it here.
by Daedalus66
Fri May 31, 2019 2:47 pm
Forum: openTx
Topic: irange irx4plus channel order
Replies: 7
Views: 514

irange irx4plus channel order

Thanks Daedalus. I fully agree to your Bottom line. But two last questions: 1) If I change the channel order in the "Radio Setup", "Rx channel order", this has no effect on mapping the sticks to the receiver inputs. With this experience I ask myself what this parameter finally works on (if changes ...
by Daedalus66
Thu May 30, 2019 11:59 pm
Forum: openTx
Topic: irange irx4plus channel order
Replies: 7
Views: 514

irange irx4plus channel order

The module’s automatic translation of channel order from AETR to the Spektrum order of TAER is a major simplification for anyone who uses other protocols, as it means all protocols can use a standard order of AETR and the transmitter firmware can have that as its default order. On the other hand, if...
by Daedalus66
Tue May 28, 2019 11:46 pm
Forum: openTx
Topic: Variable Speed on Motors
Replies: 1
Views: 237

Re: Variable Speed on Motors

I'm going to switch my electric float plane with 2 motors from my Futaba to my X10S. I have each motor set up on a seperate channel. I have a switch set up to couple the throttle on the motors to the rudder. This way on taxi out as I move the rudder to the right I will get more throttle on the left...
by Daedalus66
Mon May 27, 2019 7:29 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X on Taranis
Replies: 474
Views: 68310

ERSKY9X on Taranis

ERSkyTX on the new Taranis X9-Lite - first flights. Three flights on my Durafly Tundra with the new radio. I’m liking the feel of the radio - compact with very decent sticks. Lighter and more comfortable than the QX7. Using RX6R with ACCESS firmware. https://uploads.tapatalk-cdn.com/20190527/0b41004...
by Daedalus66
Wed May 22, 2019 11:37 am
Forum: The Pickled Gnu (The Pub)
Topic: IRangeX 4in1 Plus fw flashing.
Replies: 53
Views: 10473

IRangeX 4in1 Plus fw flashing.

I have successfully constructed a Blade 230S v2 model for the Taranis X9D and flight tested it. I intend to write it up, but for now feel free to contact me via PM if you need information.
by Daedalus66
Wed May 22, 2019 1:08 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4494
Views: 413036

ERSKY9X Coding

Thank you Mike and Joao for getting me back on track. The X9-Lite appears to be unscathed by its encounter with reverse voltage. Here’s the story. I’ve explained how I managed to misinterpret the polarity markings and connect a 6 cell NiMH battery (for the QX7) to the wrong battery springs. When tur...
by Daedalus66
Tue May 21, 2019 1:52 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4494
Views: 413036

Re: ERSKY9X Coding

Thanks Mike. Totally my fault. I misinterpreted the polarity (despite checking three times!) and applied reverse voltage. Now with correct polarity, I see the “OpenTX” screen but then it blanks out and shuts down. Slight noises while this is happening. No obvious signs of burnt components. I have an...
by Daedalus66
Tue May 21, 2019 12:42 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4494
Views: 413036

Re: ERSKY9X Coding

Hi Mike Just received an FrSky X9 Lite. It looks and feels fine but does nothing when the button is pushed to turn it on (powered with six NiMH while I wait for 18650). Presumably, it's necessary to load ERSkyTX before anything works. I put the xlite file into a FIRMWARE folder om the SD card and tr...
by Daedalus66
Wed Mar 27, 2019 6:38 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: IDLE switch for winches
Replies: 6
Views: 1215

Re: IDLE switch for winches

Just for information. The switch you are talking about has nothing to do with idle. It’s usually simply referred to as the “three-position switch”. The three positions are called ID0, ID1, ID2. Or when the switch is used to control Flight Mode they are called N, 1, 2. Sent from my iPad using Tapatalk
by Daedalus66
Tue Mar 05, 2019 4:53 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 5183

Re: Onboard Glow Igniter With ATtiny85

Just one more thing, those glow starters with battery never worked well with my engines.. After I built the power panel for my flight box, never had a single problem, apart from the engines being stubborn once in a while of course :) João The problem is that the glow starter batteries are often too...
by Daedalus66
Tue Mar 05, 2019 4:43 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 5183

Re: Onboard Glow Igniter With ATtiny85

Will rather use switching voltage regulator, as you do, just focus on 1.5V on its output with no manual calibration or adjusting to any particular plugs. It should work with all glow plugs currently on the market. :). All the modern plugs I know of are designed for 1.2v. I’m not saying they won’t t...
by Daedalus66
Tue Mar 05, 2019 1:01 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 5183

Re: Onboard Glow Igniter With ATtiny85

Plugs certainly were made for 2v, but we’re talking quite a few years ago.


Sent from my iPad using Tapatalk
by Daedalus66
Mon Mar 04, 2019 2:27 pm
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 5183

Onboard Glow Igniter With ATtiny85

Plugs are (or were) made specifically for 2.0v lead acid cells, 1.5v carbon-zinc cells (such as the big old #6 cells), and 1.2v NiCd (not in those days NiMH) cells. Most of the ones available today are designed for 1.2v. I would expect that running them on 1.5v constantly would shorten their life. B...
by Daedalus66
Sat Feb 02, 2019 3:59 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 3307

Re: Lemon Telemetry with ErSky9x

Mike

Send me your postal address and I’ll send you a Lemon receiver with vario/altitude.

Nigel


Sent from my iPad using Tapatalk
by Daedalus66
Fri Dec 28, 2018 10:55 pm
Forum: ersky9xr
Topic: Model saved when flashing?
Replies: 1
Views: 296

Re: Model saved when flashing?

No, but it’s a really good idea to make a backup in case something goes wrong. I’ve never lost a model when upgrading.

Note that you will need to check each model if the update is from an old version.


Sent from my iPad using Tapatalk
by Daedalus66
Mon Dec 17, 2018 1:16 am
Forum: The Pickled Gnu (The Pub)
Topic: RcGroups in trouble??
Replies: 11
Views: 2734

Re: RcGroups in trouble??

No problems with RCGroups using Safari on my iPad. But of course it may have been down when I wasn’t trying.


Sent from my iPad using Tapatalk
by Daedalus66
Sun Dec 16, 2018 5:51 pm
Forum: The Pickled Gnu (The Pub)
Topic: RcGroups in trouble??
Replies: 11
Views: 2734

Re: RcGroups in trouble??

Yes, I’ve had to go to a regular browser to access RCGroups for a week or two. Tapatalk does work with it (though it’s OK here).


Sent from my iPad using Tapatalk
by Daedalus66
Thu Nov 29, 2018 1:38 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 3307

Re: Lemon Telemetry with ErSky9x

You’re quite right. The LM0030 provides only altitude telemetry, not vario. The LM0052 provides both.
by Daedalus66
Tue Oct 16, 2018 6:24 pm
Forum: openTx
Topic: I have searched and read and tried for 2 days to get the 9xr pro to work
Replies: 10
Views: 1065

Re: I have searched and read and tried for 2 days to get the 9xr pro to work

The 9XR Pro was designed to use ErSky9x. It could at one time use OpenTX as well, but I believe the newer versions of OpenTX are no longer compatible.

ErSky9x will do the job.
by Daedalus66
Mon Oct 08, 2018 12:41 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro not being detected in any simulator
Replies: 22
Views: 2301

9XR Pro not being detected in any simulator

Phoenix appears to have been discontinued since earlier in 2018. The last version was 5.5. Version 2.5 is several years old. As far as I know, the dongle works only with Phoenix. I have a dongle from version 1 and it still works with version 5. Edit: I’m referring to the Phoenix genuine dongle, not ...
by Daedalus66
Mon Oct 08, 2018 10:46 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR Pro not being detected in any simulator
Replies: 22
Views: 2301

9XR Pro not being detected in any simulator

Phoenix comes with a dongle for the trainer port that enables your transmitter to plug into the USB port. The dongle provides copy protection.

No dummy transmitter is supplied, though they did used to sell a package of Phoenix with a DX5e.
by Daedalus66
Thu Sep 27, 2018 3:51 am
Forum: General help (FrSky Taranis radio)
Topic: Replaced gimbal - now can't enter Bootloader.
Replies: 7
Views: 973

Re: Replaced gimbal - now can't enter Bootloader.

Version 2.0 and later, but I would suggest at least 2.1.19 for a good stable and advanced version. While you’re at it, why not go for 2.2?
by Daedalus66
Tue Sep 25, 2018 11:17 am
Forum: er9x
Topic: Er9x test versions
Replies: 16
Views: 38453

Re: Er9x test versions

See previous post. Please don’t clutter this thread with discussion of other topics.
by Daedalus66
Fri Sep 21, 2018 12:09 pm
Forum: FrSky Taranis radio
Topic: Taranis X9D & DSMX hack
Replies: 5
Views: 1140

Taranis X9D & DSMX hack

The DX4e units were all DSM2/DSMX. There may have been some early DX5e units that were DSM2 only, but from about 2011, with the advent of DSMX, the two transmitters shared the same 6-channel RF section with the DX6i. Since the DX5e is the transmitter supplied, until recently, with the RTF version of...
by Daedalus66
Fri Sep 21, 2018 12:41 am
Forum: FrSky Taranis radio
Topic: Taranis X9D & DSMX hack
Replies: 5
Views: 1140

Re: Taranis X9D & DSMX hack

Which receiver? The Apprentice S originally had an E-Flite SAFE receiver but now uses an AR636. I do know that the E-Flite receiver did not work with the DM9. This was acknowledged by Spektrum. Does the modified DM9 you have use a DSM2 module from an early DX5e or a DSMX from a later one? It would n...
by Daedalus66
Tue Sep 18, 2018 5:42 pm
Forum: General help (FrSky Taranis radio)
Topic: FrSky Taranis Special Edition Low RSSI (Crash)
Replies: 6
Views: 918

Re: FrSky Taranis Special Edition Low RSSI (Crash)

I have one of the very first batch of X9Ds sold in North America by Aloft in July 2013. Still going strong after more than five years. I’ve upgraded the sticks but never touched the electronics.

I’ve mostly used it with ErSky9x, though at the moment it’s on OpenTX as I experiment with version 2.2.
by Daedalus66
Mon Sep 10, 2018 6:06 pm
Forum: FRSky Horus radio
Topic: HORUS 12s delta wing mixing
Replies: 3
Views: 865

HORUS 12s feta wing mixing

This is what an elevon function looks like: CH1 50 I Ele -50 I Ail CH2 50 I Ele 50 I Ail You may be using different channel order but this is the basic idea. Note that one Ail input is negative and the other positive. Note also the 50% weights to prevent overdriving the servos when both Ail and Ele ...

Go to advanced search