Search found 1478 matches

by Daedalus66
Tue Feb 27, 2018 2:56 pm
Forum: ersky9xr
Topic: Turnigy QBot radio adapter
Replies: 18
Views: 2204

Turnigy QBot radio adapter

The Tx has to be in Slave mode so it will send the signal out the trainer port to the RF module (otherwise, it will be in Master mode and send it to the internal module). This is accomplished by plugging in the module with the Tx turned OFF; the action of plugging in then powers up the Tx in Slave m...
by Daedalus66
Sun Feb 25, 2018 10:29 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 45708

Re: My 9Xtreme Installation

“Bad” in what sense? It’s big enough for 6 AA cells.
by Daedalus66
Sat Feb 24, 2018 1:39 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4497
Views: 414404

ERSKY9X Coding

No telemetry. It’s a simple DSM2 Orange. Good point though.
by Daedalus66
Fri Feb 23, 2018 11:07 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4497
Views: 414404

ERSKY9X Coding

I’ve been doing more testing with confusing results. The Multi Orange modules seem to work properly now but the iRangeX still seems questionable. Right now I have to do any testing in the house as there’s freezing rain outside! I find range checking quite variable indoors. However, this issue first ...
by Daedalus66
Fri Feb 23, 2018 1:09 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4497
Views: 414404

Re: ERSKY9X Coding

Hi Mike I just discovered a problem with the X7 version of r221g7 when using the Multi protocol menu. There are two ways to invoke Range Test, in the main protocol screen and in the screen you get when you exit that screen (see picture). When you use the main protocol screen, Range Test works correc...
by Daedalus66
Wed Feb 21, 2018 11:54 am
Forum: ersky9xr
Topic: Turnigy QBot radio adapter
Replies: 18
Views: 2204

Re: Turnigy QBot radio adapter

It’s like the AnyLink, a separate RF module with its own battery that plugs into the trainer port. The transmitter needs to be switched OFF so that plugging in the external module can turn it ON. https://hobbyking.com/en_us/q-bot-micro-quadcopter-w-2-4ghz-rf-module-spektrum-jr-futaba-compatible.html...
by Daedalus66
Tue Feb 20, 2018 10:03 pm
Forum: openTx for FrSky radios
Topic: update firmware for X7 tx
Replies: 7
Views: 1669

Re: update firmware for X7 tx

MikeB wrote:At some point this has now been changed to "FIRMWARE".

Mike
The change came with v2.2. Maybe it’s because “FIRMWARES” has nine letters?
by Daedalus66
Sun Feb 04, 2018 8:40 pm
Forum: ersky9xr
Topic: Throttle stick reversed on one Tx
Replies: 4
Views: 904

Re: Throttle stick reversed on one Tx

Earlier versions of the firmware did not have the Hardware menu locked. It was precisely because people would change settings they didn’t understand, and that only needed to be changed rarely, that the lock was introduced. If you had the transmitter on an earlier version you might well have reversed...
by Daedalus66
Sun Feb 04, 2018 8:33 pm
Forum: er9x
Topic: Er9x test versions
Replies: 16
Views: 38595

Re: Er9x test versions

Phil
Mike has asked you repeatedly NOT to use this thread for discussion.



Sent from my iPhone using Tapatalk
by Daedalus66
Sun Jan 28, 2018 7:38 pm
Forum: er9x
Topic: The new Turnigy 9X hardware can use ER9X ?
Replies: 42
Views: 9472

Re: The new Turnigy 9X hardware can use ER9X ?

PCM is an obsolete protocol for FM radios. Ignore it.
by Daedalus66
Thu Jan 25, 2018 1:45 pm
Forum: FrSky Taranis radio
Topic: Internal and External module to same Rx
Replies: 4
Views: 810

Re: Internal and External module to same Rx

Each module has a unique ID number. A receiver can bind to only one ID number at a time. Hence a receiver cannot be bound to two modules.
by Daedalus66
Wed Jan 17, 2018 2:14 am
Forum: openTx
Topic: OpenTX 2.0.0
Replies: 300
Views: 82516

Re: OpenTX 2.0.0

Your second question was whether it was worth upgrading. Kilrah gave a very clear answer which amounted to:
1. The release posts on OpenTX website state what upgrading gets you.
2. Only you can decide whether the changes are worthwhile in your situation.
by Daedalus66
Tue Jan 09, 2018 2:23 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 3331

Re: Lemon Telemetry with ErSky9x

Reserved for further details on Lemon telemetry.
by Daedalus66
Tue Jan 09, 2018 2:22 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 3331

Re: Lemon Telemetry with ErSky9x

Reserved for screen shots of Lemon telemetry.
by Daedalus66
Tue Jan 09, 2018 2:21 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 3331

Lemon Telemetry with ErSky9x

The purpose of this thread is to provide a place to discuss the use of ErSky9x with Lemon RX telemetry. Lemon telemetry uses DSMX/DSM2 and the Spektrum telemetry protocol. It is designed to work with current generation telemetry-enabled Spektrum transmitters such as the DX6, DX8G2, DX9 or DX18G2 (an...
by Daedalus66
Fri Jan 05, 2018 8:53 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis X9D+ channels are all wrong on the Rx
Replies: 7
Views: 1258

Re: Taranis X9D+ channels are all wrong on the Rx

It’s not too difficult to move mixes using the transmitter. Just go to a line, press Ent to select it, then use the Move command to move it where you want. And so on for the required rearrangement. Not quick, but easy enough.
by Daedalus66
Thu Jan 04, 2018 2:53 pm
Forum: General help (FrSky Taranis radio)
Topic: Taranis X9D+ channels are all wrong on the Rx
Replies: 7
Views: 1258

Re: Taranis X9D+ channels are all wrong on the Rx

Stick Mode and Default Channel Order must be set separately. Channel Order only applies to NEW models, it does not affect existing models.
Check that both are set correctly and create a new test model. I think you’ll find all works correctly.
by Daedalus66
Wed Jan 03, 2018 1:25 pm
Forum: Software
Topic: Copy multiple lines from one model to another using Companion?
Replies: 2
Views: 678

Re: Copy multiple lines from one model to another using Companion?

You can always duplicate an existing model and use the copy as the basis for programming the new build.
by Daedalus66
Mon Dec 25, 2017 8:25 pm
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

Thanks. Been a while since I used eepm.
by Daedalus66
Mon Dec 25, 2017 6:36 pm
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

I can’t get Reinhard’s file to open either.
by Daedalus66
Sun Dec 24, 2017 6:46 pm
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Help Exporting Model from OpenTx into ersky9x

I took a look at the setup. I very much recommend that you stay with one of the two common stick modes, 1 (throttle on right) or 2 (throttle on left). It will simplify life! Also, there is no such thing as stick Order. Stick Mode describes which stick axis does what and has nothing to do with order....
by Daedalus66
Sun Dec 24, 2017 6:09 pm
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

Assuming you have mixes set at 100, you should see 100% throw on the channels (unless there are other mixes). Did you calibrate the sticks? Go to Radio Setup, Calibrate and follow the instructions. Almost everything you are asking is covered in the ER9X manual, recommended by João. Will look at the ...
by Daedalus66
Sat Dec 23, 2017 11:46 pm
Forum: The Pickled Gnu (The Pub)
Topic: Need Help- Maiden Phoenix 2000 Glider Flight - Bad Crash
Replies: 10
Views: 2152

Need Help- Maiden Phoenix 2000 Glider Flight - Bad Crash

I’m an instructor in our club flight school. Even young pilots (who typically learn much faster than adults — especially the 50+ ones) need a few flights on the buddy box if they are not to crash on the first flight. I strongly recommend getting help by joining a club. That said, I have to admit tha...
by Daedalus66
Sat Dec 23, 2017 4:55 pm
Forum: The Pickled Gnu (The Pub)
Topic: Need Help- Maiden Phoenix 2000 Glider Flight - Bad Crash
Replies: 10
Views: 2152

Re: Need Help- Maiden Phoenix 2000 Glider Flight - Bad Crash

Very sorry to hear about the crash. Just how much flying experience do you have? The Phoenix 2000 is not a good place to start if you are trying to teach yourself to fly. It’s not particularly hard to fly but it is slow to respond and has little or no self-righting tendency. Finally, as you have fou...
by Daedalus66
Sat Dec 23, 2017 1:53 pm
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Help Exporting Model from OpenTx into ersky9x

That sounds plausible. The lesson is to take Channel Order and Stick Mode functions absolutely literally. The names say what they do. They must not be used otherwise or nothing you do will make sense. The other common mistake is not to realize that Channel Order affects only NEW models. It does not ...
by Daedalus66
Sat Dec 23, 2017 1:44 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 619
Views: 113890

Re: Orange Module running MULTI protocol

Duh. Why couldn’t I find that? Thanks very much.
by Daedalus66
Sat Dec 23, 2017 4:33 am
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

Also I have my flaps on CH2 and CH3 but for some reason when in break/landing mode they are operated by the elevator stick, but in OpenTx version of the model they are controlled by the throttle stick with a deadpoint in the middle, any ideas where I am going wrong Thanks John You've got the wrong ...
by Daedalus66
Sat Dec 23, 2017 4:21 am
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

Hi Daedalus66 Ok think I have most of it setup correctly, one thing I have noticed which I cannot find out how to do is get the flight mode names to show on the 9XR Pro. I have attached a .rar file which has model setups in OpenTx and ersky9x. Please look at model P2K Test If running with OpenTx an...
by Daedalus66
Sat Dec 23, 2017 4:07 am
Forum: erskyTx (was ersky9x)
Topic: Help Exporting Model from OpenTx into ersky9x
Replies: 28
Views: 3088

Re: Help Exporting Model from OpenTx into ersky9x

Same here. Just get error messages.
by Daedalus66
Fri Dec 22, 2017 5:20 pm
Forum: RF MODULES
Topic: Orange Module running MULTI protocol
Replies: 619
Views: 113890

Orange Module running MULTI protocol

Could you provide a link please. A brief search didn’t turn it up.

Go to advanced search