Search found 185 matches

by stotty1111
Mon Jan 21, 2019 7:07 am
Forum: Hardware
Topic: 9XR Pro probs
Replies: 41
Views: 3844

Re: 9XR Pro probs

ok, hopefully later today after I have opened it up look at the gimball!
by stotty1111
Sun Jan 20, 2019 5:35 pm
Forum: Hardware
Topic: 9XR Pro probs
Replies: 41
Views: 3844

Re: 9XR Pro probs

yes, diag switch, pressing trims changes from 0 to 1 on all trims
by stotty1111
Sun Jan 20, 2019 2:09 pm
Forum: Hardware
Topic: 9XR Pro probs
Replies: 41
Views: 3844

9XR Pro probs

Hi all Got a 9XR Pro which is currently playing up, in that 2 of the trim adjusters have stopped working, the lhs horizontal and the rhs vertical.I can however get to the hidden menus using the 2 horizontal trims and one of the gimbals will not hold its calibration setting. I have stripped the box d...
by stotty1111
Tue Oct 30, 2018 6:30 pm
Forum: Hardware
Topic: 9XR Pro failure to boot
Replies: 3
Views: 1270

Re: 9XR Pro failure to boot

Ok, opened the box up, some traces of 'mildew?' on the rocker pads, a little burning on the main switch, cleaned up with switch cleaner/lubricant, and the switch was given a dose of silicon grease - all working fine now, can only think there were traces of moisture in the box after its last active u...
by stotty1111
Mon Oct 29, 2018 6:45 pm
Forum: Hardware
Topic: 9XR Pro failure to boot
Replies: 3
Views: 1270

9XR Pro failure to boot

Hi all strange situation with my 9XR Pro tx, switching on get a quick flash of the model loaded, followed by blue screen with shutting down then blue screen with power off , if i shut down and reboot same situation, looking for ideas, suggestions, solutions etc tomorrow i'll open it up and clean all...
by stotty1111
Mon Jun 18, 2018 8:12 pm
Forum: th9x
Topic: turnigy 9x set, with IA8 afhds 2A rx
Replies: 3
Views: 2497

Re: turnigy 9x set, with IA8 afhds 2A rx

ok, thanks for the info, bit remiss of hobbyking/turnigy not indicating no retro compatibility. hobbyking respondedto the question today, they are working on a fix which will make the new system retro compatible! Flashed the tx with er9x , replacing the module with an old version the system works as...
by stotty1111
Sat Jun 16, 2018 3:41 pm
Forum: th9x
Topic: turnigy 9x set, with IA8 afhds 2A rx
Replies: 3
Views: 2497

turnigy 9x set, with IA8 afhds 2A rx

ok, a club member has just received the above kit as a result of the recent hobbyking sales event. Some questions re this kit the transmitter can presumably be re progged with er9x? will it work with earlier v2 receivers? if so how would it be set up? it will obviously work with a new ia8 rx, any sp...
by stotty1111
Tue Apr 17, 2018 4:59 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

Ok that worked - my buddy will be happy come Friday night! Re the regulator and cap, I already have a selection of each, I am looking for a link to the original repair posting for the locations of the replacement reg and cap, I had it stored on my laptop but a hdd failure meant it has been lost. Wou...
by stotty1111
Tue Apr 17, 2018 11:50 am
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

ok, good enough?
DSCF8140.JPG
by stotty1111
Tue Apr 17, 2018 6:36 am
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

Ok, now compared this board with a later version and the sck pad on this board connects to pin 9 when numbered from right hand side, a later board with fried regulator has sck pad connected to pin 6 -- presumably I need to solder a fly lead from pin 6 to the pad sck pad on the smar... board? Whilst ...
by stotty1111
Mon Apr 16, 2018 7:46 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

ok quickly mounted small board and tried it reading firmware, get this message which is slightly different to the original ================================================================================= Started AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -P usb -U flash:r:C:/U...
by stotty1111
Mon Apr 16, 2018 7:35 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

well that was spectacularly unsuccessfull usb connection not recognised having now retried a small interface as well as the larger version, the small unit is recognised but the large throws up a malfunction warning -- why would that be?I will replace the board tomorrow am and see what happens. Thank...
by stotty1111
Mon Apr 16, 2018 4:47 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

Ok, also going to try with an old win 7 laptop, currently charging and updating.
by stotty1111
Mon Apr 16, 2018 4:31 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

treied that both off and on, same message as above
by stotty1111
Mon Apr 16, 2018 1:13 pm
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

Re: flashing eurgle 9x

windows 10 in device manager I have a firmware file, would that be usb driver I seem to remember years ago it was listed as lisub or something similar have reloaded the smartieparts usb driver again, still get the above message -- with regard to the pc not seeing the board, could that be because the...
by stotty1111
Mon Apr 16, 2018 11:38 am
Forum: th9x
Topic: flashing eurgle 9x
Replies: 15
Views: 4729

flashing eurgle 9x

Ok, another modeller approached me yesterday to flash his eurgle 9x, so am currently trying to do it, have downloaded the latest eepe software and mounted it along with a download of er9x m64. cleaned up the pcb pads and the spring loaded contacts on a smartieparts rev 2.1 prog.. board mounted same ...
by stotty1111
Sat Apr 14, 2018 2:27 pm
Forum: Turnigy 9XR PRO radio
Topic: Fine tune rockers locked how to unlock?
Replies: 7
Views: 1707

Re: Fine tune rockers locked how to unlock?

haven't got any mixes - however cracked it, by clearing the mix setups and reconfiguring - a bit of a ball acher but it workrd, my chum jean pierre (his tx) sends a thank you for your time and effort, We can now get practising for tomorrows completion(model boat steering etc) And a big thanks from m...
by stotty1111
Sat Apr 14, 2018 11:00 am
Forum: Turnigy 9XR PRO radio
Topic: Fine tune rockers locked how to unlock?
Replies: 7
Views: 1707

Re: Fine tune rockers locked how to unlock?

Ok, got 3 trimmers working the lhs horizontal isn't, however in dia swi the trimmer indicates a 0 -> 1 when manipulated - where to now?
by stotty1111
Sat Apr 14, 2018 8:45 am
Forum: Turnigy 9XR PRO radio
Topic: Fine tune rockers locked how to unlock?
Replies: 7
Views: 1707

Re: Fine tune rockers locked how to unlock?

yeap(couldn't think of the proper name), Ersky9x r220
by stotty1111
Sat Apr 14, 2018 8:33 am
Forum: Turnigy 9XR PRO radio
Topic: Fine tune rockers locked how to unlock?
Replies: 7
Views: 1707

Fine tune rockers locked how to unlock?

Hi all
Had this problem previously and solved it, however I'm on a competition w/e and my notes are in the house(message there somewhere!)
How is it done, which menu and where?
The rockers I refer to are under and at the sides of the gimbals.
by stotty1111
Tue Aug 22, 2017 1:27 pm
Forum: Hardware
Topic: 9XR screen going blank
Replies: 5
Views: 1062

Re: 9XR screen going blank

I had set it a couple of weeks ago for the guy, but he had changed the setting, maybe my fault for making the great ASSUMPTION the reading was correct, hey ho learn something new every day!
by stotty1111
Tue Aug 22, 2017 10:19 am
Forum: Hardware
Topic: 9XR screen going blank
Replies: 5
Views: 1062

Re: 9XR screen going blank

Without opening up the tx, it may have been the tx battery, just recharged it and as the French would say voilla it works, I think I need to check the battery output with that displayed, perhaps my friend has adjusted the value displayed. Should have started there to start with, another little victo...
by stotty1111
Tue Aug 22, 2017 6:11 am
Forum: Hardware
Topic: 9XR screen going blank
Replies: 5
Views: 1062

9XR screen going blank

Hi all another strange occurrence, the screen on the unit on boot shows a good blue background etc, giving the splash screen, it then sometimes shows the operational screen then blanks or sometimes goes straight to blank scree at the end of the splash. If I plug the usb lead in the radio screens all...
by stotty1111
Mon Aug 14, 2017 11:54 am
Forum: Hardware
Topic: Dumb / Dim question
Replies: 2
Views: 742

Re: Dumb / Dim question

thanks for that, incorrectly assumed V OFF all one term!
by stotty1111
Mon Aug 14, 2017 10:56 am
Forum: Hardware
Topic: (xr radio problem
Replies: 9
Views: 1837

Re: (xr radio problem

ok thanks for the lead
by stotty1111
Mon Aug 14, 2017 10:53 am
Forum: Hardware
Topic: Dumb / Dim question
Replies: 2
Views: 742

Dumb / Dim question

After booting the tx on the second line there are references to Exp (got that sorted) and V Off, whats that refer to? Looked through manual quickly but couldn't find it!

IF ITS DEAD OBVIOUS, I'LL GO AND STAND IN THE CORNER FOR A WHILE!! ; - D)
by stotty1111
Mon Aug 14, 2017 8:51 am
Forum: Hardware
Topic: (xr radio problem
Replies: 9
Views: 1837

Re: (xr radio problem

Ok, some progress, stripped the 9XR Saturday evening to get at the main switch, removed it, gave it a squirt of servisol switch cleaner, then a squirt of silicone lubricant(not WD40, it was designed for space missions of 20 days way back when and its effect lasts for 40 days, WD - water dispersant) ...
by stotty1111
Sat Aug 12, 2017 6:02 pm
Forum: Hardware
Topic: (xr radio problem
Replies: 9
Views: 1837

Re: (xr radio problem

ok , had seen that before I posted, do I need to make some settings therein?
didn't get to pond today, hopefully tomorrow!
by stotty1111
Sat Aug 12, 2017 4:24 pm
Forum: Hardware
Topic: (xr radio problem
Replies: 9
Views: 1837

Re: (xr radio problem

Yeap it could be that, seem to recall I had probs initially, used switch cleaner and the probs disappeared.
trainer menu - > model setup -> general -> page 3 tick box trainer?
by stotty1111
Sat Aug 12, 2017 11:12 am
Forum: Hardware
Topic: (xr radio problem
Replies: 9
Views: 1837

Re: (xr radio problem

subsequent! - I should have added above, tried 2 modules both the same!
I thought it may be the mix as I think it was fine before!

Go to advanced search