Search found 210 matches

by davx
Sun Aug 24, 2014 9:04 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

The output offset for bidirectional current sensors has to be set at about half of Vcc. Can/should this be managed by the configurator or is it sufficient to mention that in the future documentation? João did answered for the mV and I would add that I had put the directional setting at first but it...
by davx
Sun Aug 24, 2014 8:25 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Thanks João for your explanation but I was saying that I had already really very well understood what you were talking about :mrgreen:
Off Topic
kalle123 wrote: F1
Yes, right analysis.
by davx
Sun Aug 24, 2014 6:53 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

@davx. Added a bash script inside the OXS_Configurator_v1.0_linux folder with those two lines Ok, will try that. ...I think that by inserting the values of the resistors, the result would be more accurate, and and if it can be implemented, why not? The result would not be more accurate because the ...
by davx
Sun Aug 24, 2014 6:29 pm
Forum: er9x
Topic: er9x development
Replies: 3142
Views: 588269

Re: er9x development

@andrewju,

Latest OXS version is now here: https://code.google.com/p/openxsensor/
Go to "Downloads & Documentation".

Bye.
by davx
Sun Aug 24, 2014 9:33 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Thanks for your input Mike, I will use it for the wiki.
by davx
Sun Aug 24, 2014 7:24 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi, With the resistors is also an excellent idea.. we would just have to measure the resistors with a multimeter and insert the exact values.. That would be easier and user friendly for the people because they didn't even have to calculate a divider as it would be done in the program by using the re...
by davx
Sat Aug 23, 2014 11:59 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

It took me a while to find out how to change the divider ratio for the voltages.. As KAL already said, you can also click and drag to change the value of these numberbox. I've replaced the texfields because they were very buggy... Also, could the configurator calculate the maximum voltage allowed f...
by davx
Sat Aug 23, 2014 9:23 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi,

I am pleased to announce the release of the first version of OXS Configurator :)
OXS_conf_08.jpg
Actual and future downloads & docs links: https://code.google.com/p/openxsensor/wiki/OXS_Index

Hope you like it ;)

Bye
by davx
Wed Aug 13, 2014 6:46 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: ER9X and OpenXSensor - Problems sending VOLT1 to FasV (fixed
Replies: 11
Views: 3662

Re: ER9X and OpenXSensor - Problems sending VOLT1 to FasV

Hi,

I think "FRSKY_USERDATA_VFAS_NEW" is not recognized by ER9X, this is not an official FrSky ID, it has been added to simplify data sending and is implemented in OpenTX.

Mike could probably provide support for it.

Bye.

PS: You can stay with NUMBEROFCELLS = 0 if you don't use "CELLS" data.
by davx
Sun Aug 10, 2014 9:54 am
Forum: General help (FrSky Taranis radio)
Topic: ANOTHER failure to flash issue
Replies: 43
Views: 10039

Re: ANOTHER failure to flash issue

Hi, STM32 Bootloader2.jpg And here's what it looks like after I've installed it... Duncan This show the correct driver but what's strange is that you've got 7 devices found. It seems you've installed the driver multiple times, it could be a problem... Now, plug the USB TX off and choose the settings...
by davx
Sun Aug 10, 2014 6:55 am
Forum: FrSky Taranis radio
Topic: Instant Trim
Replies: 12
Views: 3531

Re: Instant Trim

Hi,

You can also access this functionality by pressing [ENTER LONG] on the servo line of interest:
screenshot-1.png
screenshot-1.png (2.03 KiB) Viewed 3442 times
Bye.
by davx
Sat Aug 09, 2014 9:23 am
Forum: General help (FrSky Taranis radio)
Topic: ANOTHER failure to flash issue
Replies: 43
Views: 10039

Re: ANOTHER failure to flash issue

Hi, What confuses me is that I have the STM32 bootloader installed, I'm running the latest (v2.0.8) version of OpenTX Companion, and I'm trying to flash the latest (v2.0.8) version of the TX firmware. Just goes nowhere. It's clearly a driver problem, could you please follow the advices in this discu...
by davx
Mon Aug 04, 2014 6:39 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi João, Yes, temperature is disabled because I was using a MCP9700A sensor with a special compensation error calculation, and mstrens found it too restrictive and preferred that it be done with a volt(x) measurement and some offset settings. It's, indeed, possible, but I couldn't do that, as I don'...
by davx
Sun Aug 03, 2014 5:23 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi, Second beta ! OXS_conf_07.jpg Now, you have to use the write button :) The aim (if you accept the mission), is to check if the configurator can spot every possible mistake we could do in the settings. As you probably guessed, all the tests code is activated by the famous write button so... I've ...
by davx
Sat Aug 02, 2014 12:38 pm
Forum: General help (FrSky Taranis radio)
Topic: taranis wont turn on
Replies: 104
Views: 42624

Re: taranis wont turn on

Hi,

@fatcnt,

My experience here:
viewtopic.php?f=97&t=5700#p80910

Hope it helps.

Bye.
by davx
Tue Jul 29, 2014 9:27 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

jhsa wrote: I'm just trying to help
That's what I understood and I was just trying to explain the current choices. ;)

I've a pretty clear idea of what I think is good for the first release, then, we could make further changes based on user experience.
by davx
Tue Jul 29, 2014 6:51 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi, Thanks everyone ! @mstrens, Yes, it should work on every win flavor, tested on XP, 7 64b and 8.1 64b. And I should have said that you need java installed. I know it is not finished, not even close Hum...in fact, it's not so far from first release. we shouldn't be able to select the same pins for...
by davx
Sun Jul 27, 2014 9:27 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi, Let me just say that it's not finished, you can play with every tabs, buttons...any controllers but please don't press "Write Config"... Yes, you'll find a pre beta below ;) It's win32 for now, if anyone wants another version, just ask ! The install is pretty complicated: unrar where you want an...
by davx
Sun Jul 27, 2014 9:16 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

jhsa wrote:I prefer the mV/A as you have in there than the step thing that is currently used.. just can get my sensor right :( Before it was quite easy. And the offset should also be in mV
That's the aim of the configurator, simplify the OXS settings, the calculations are done under the hood ;)
by davx
Sun Jul 27, 2014 9:09 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Who wants to build and sell varios for a french company?
Replies: 64
Views: 11468

Re: Who wants to build and sell varios for a french company?

But then if it uses an analog pin, if someone needs ro read a 6 cell pack, it is not possible to have current anymore cos there aren't available pins. :o and that is with the arduino version that has 7 of them already. In fact, you can get up to 8 analog pins on pro mini: A0 to A7 Like this one: ht...
by davx
Sat Jul 26, 2014 11:34 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi,

One more:
OXS_conf_06.jpg
Maybe a beta soon... ;)
by davx
Sat Jul 26, 2014 10:12 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: Who wants to build and sell varios for a french company?
Replies: 64
Views: 11468

Re: Who wants to build and sell varios for a french company?

Hi,
mstrens wrote: Currently the arduino pro mini still do the job. So why changing now?
I also agree, but at least, if OXS supports another board, I'd like it keeps the arduino pro mini compatibility.
by davx
Thu Jul 24, 2014 5:07 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi,

Another one:
OXS_conf_05.jpg
I can almost see the end of the tunnel ;)

Bye.
by davx
Wed Jul 23, 2014 11:41 am
Forum: General RC Electronic Projects and Discussion
Topic: Servo, push-rod, control surface graphical simulation
Replies: 10
Views: 4160

Re: Servo, push-rod, control surface graphical simulation

Hi,

Excellent !

You should also put the github link here.

Bye
by davx
Tue Jul 22, 2014 4:39 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi,

A little screen with a new tab and some grayed elements:
OXS_conf_04.jpg
Bye
by davx
Mon Jul 21, 2014 11:17 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

jhsa wrote:One thing that I think is necessary is the ability to load existing config files and edit them. it would make it easy to do some small changes without having to configure all fields again..
Maybe not for the first release, but obviously, this is planned ;)
by davx
Mon Jul 21, 2014 11:12 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

@mstrens, It looks like the user could click directly on the button "Write config" whitout filling the tabs. This part is not finished but it shouldn't be a problem, if button is clicked too early, just continue with the settings and click again. I think it is better using a process like when you in...
by davx
Sun Jul 20, 2014 5:10 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Hi,

A little update :
OXS_conf_03.jpg
Not much news to see, the majority of work is not visible, but it's progressing nicely ;)

Bye.
by davx
Fri Jul 18, 2014 5:09 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 95926

Re: OpenXsensor Configurator

Thanks guys ! Nice! (BTW it's Protocol not Portocol).. Oh yes :mrgreen: I'm sure there will be some more... (and my keyboard is not USB, must be something else) Will you find the one on the first screen ? ;) Looking great, really. Im not just saying ;) One thing though. Don't forget we can use the a...

Go to advanced search