Search found 210 matches

by davx
Thu Nov 06, 2014 12:45 pm
Forum: openTx
Topic: logic switch use?
Replies: 8
Views: 2802

Re: logic switch use?

Hi, unfortunately it does not do the job.The 30 second timer runs fine from the SG switch but the 10 minuet timer does not start,would it be better if another physical switch was involved? As I've set this, the 10min timer starts when you put SG up after having put it down to start the motor and the...
by davx
Wed Nov 05, 2014 6:33 pm
Forum: openTx
Topic: logic switch use?
Replies: 8
Views: 2802

Re: logic switch use?

Hi,

You can try the eepe I've joined.

Bye.
by davx
Mon Nov 03, 2014 6:05 pm
Forum: openTx
Topic: Flap value
Replies: 4
Views: 1616

Re: Flap value

The problem is the way |d|>=x is evaluated, it is reseted immediately after being true, so in this case after 1s. By increasing the delay in the logical switch, you can cope with slower LS movements at the expense of a longer delay in the voice announcement.

Bye.
by davx
Mon Nov 03, 2014 12:55 pm
Forum: openTx
Topic: Flap value
Replies: 4
Views: 1616

Re: Flap value

Hi,

One possibility:
Var_Read_01.jpg
L1 will be on for 1s when LS makes CH10 changing, then,

Var_Read_02.jpg
the CH10 value is played once when LS is not moving.

Bye.
by davx
Sat Oct 25, 2014 8:09 am
Forum: Hardware
Topic: D8R-11 Plus and Vario
Replies: 5
Views: 1756

Re: D8R-11 Plus and Vario

Hi,

It's not really electronics, just some easy soldering and Arduino basics: https://code.google.com/p/openxsensor/w ... uild_Vario

Don't be afraid to try :)

Bye.
by davx
Fri Oct 24, 2014 5:49 am
Forum: General help (FrSky Taranis radio)
Topic: V8R4-II Reciever
Replies: 11
Views: 5360

Re: V8R4-II Reciever

Hi,
duncandan wrote:I am having trouble binding a V8R4-II receiver to my Taranis.
From the manual:
D_Mode (Telemetry)
Connect Ch1 & Ch2 signal pins of V8R4-II by provided jumper and then
connect battery to V8R4-II directly (no need to hold the F/S button on V8R4-II)
Bye.
by davx
Thu Oct 23, 2014 5:07 pm
Forum: Hardware
Topic: D8R-11 Plus and Vario
Replies: 5
Views: 1756

Re: D8R-11 Plus and Vario

Hi,
Roger wrote:... must now buy a couple of high precision varios.
Or you could make your own: https://code.google.com/p/openxsensor/ ;)

Bye.
by davx
Wed Oct 22, 2014 9:35 pm
Forum: Hardware
Topic: D8R-11 Plus and Vario
Replies: 5
Views: 1756

Re: D8R-11 Plus and Vario

Hi,

The correct wiring is detailed in the manual, you only need 3 cables:
- Yellow cable (TX port) from vario DATA out to the RX pin of the D8R-II
- V++ (red) and GND (black) to a RX servo connector

Then choose VSpd for the variometer source in the Taranis telemetry page.

Bye.
by davx
Thu Oct 09, 2014 8:48 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor project page on google code
Replies: 139
Views: 63122

Re: OpenXSensor project page on google code

Thanks Tempo,

I've just added your link and another one I've found lately, it's in french but it is very well detailed:

https://code.google.com/p/openxsensor/w ... uild_Vario

Bye.
by davx
Mon Sep 08, 2014 4:54 pm
Forum: openTx
Topic: OpenTX 2.0.0
Replies: 300
Views: 123718

Re: OpenTX 2.0.0

Hi, I've only logged data with a Taranis and your file headers do not match mine: Your file: Time,Elapsed,Valid,RxRSSI,TxRSSI,A1,A2,AltB,AltG,Temp1,Temp2,RPM,Amps,Volts,mAH,TxBat,Vspd,RxV,Lat,Long,Fuel,SC1 Taranis working log: Date,Time,SWR,RSSI,A1,A2,A3,A4,GPS Date,GPS Time,Long,Lat,Course,GPS Spee...
by davx
Fri Sep 05, 2014 5:13 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

New OXS Configurator v1.1 to download: https://code.google.com/p/openxsensor/wiki/OXS_Downloads I tried to set up an oxs as a voltagesensor without the vario features using the configurator. When triing to compile the sketch, i get the following errors... Fixed Found an new issue in oxs configurator...
by davx
Fri Sep 05, 2014 7:09 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

Hi, I tried to set up an oxs as a voltagesensor without the vario features using the configurator. When triing to compile the sketch, i get the following errors: Thanks for the report, this error will be corrected quickly ;) I can confirm that. OXS configurator does not like voltage sensor only. Ple...
by davx
Thu Sep 04, 2014 4:56 pm
Forum: openTx
Topic: OpenTX 2.0.0
Replies: 300
Views: 123718

Re: OpenTX 2.0.0

Hi,
michel49 wrote:I found the .csv datas files logged with my PRO can't be displayed with Companion 2.0.8
Put your file here so that we can test it.

Bye.
by davx
Wed Sep 03, 2014 9:37 pm
Forum: Software
Topic: Bugs in OpenTX
Replies: 6
Views: 2076

Re: Bugs in OpenTX

Hi,

This bug is already solved ;)

https://github.com/opentx/opentx/issues/1584

Bye.
by davx
Wed Sep 03, 2014 9:05 pm
Forum: General help (FrSky Taranis radio)
Topic: Can't connect to radio with Companion (SOLVED)
Replies: 11
Views: 9833

Re: Can't connect to radio with Companion (SOLVED)

Hi SeaFrog, In my case, under XP SP3, once my Taranis was flashed with 2.x.x I found no reliable chance to handshake with it before removing the Zadig drivers. You know what, I'm also under xp and I've no problem at all ;) In fact, there is no relation between the different connection modes, it's li...
by davx
Tue Sep 02, 2014 5:32 pm
Forum: General help (FrSky Taranis radio)
Topic: Can't connect to radio with Companion (SOLVED)
Replies: 11
Views: 9833

Re: Can't connect to radio with Companion (SOLVED)

Hi, Instead, once the Taranis is flashed in 2.xx, it becomes a true standard storage device and the USB driver installed by Zadig must be DELETED : then the standard USB driver for Windows needs to be used and Windows will reinstall it once the Taranis is connected. Sorry but this is not true, you d...
by davx
Tue Sep 02, 2014 11:30 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 97450

Re: OpenXSensor SPORT Interface

Hi,
kalle123 wrote: but hopefully placed the right factor on the right position :D
Yes, this screen is right.


Image
What you see in the right corner of the screen is the cells values, not ACCx.

And mstrens beat me to the answer...

Bye.
by davx
Mon Sep 01, 2014 8:11 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 97450

Re: OpenXSensor SPORT Interface

Best, I keep my mouth shut and wait for the documentation. What to do where ... No, no, you can ask what you want, your kind of questions can help to make documentation ;) About the dividers, those in the voltages tab affect the measurements directly and those in the Data sent tab affect the transm...
by davx
Mon Sep 01, 2014 5:10 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 97450

Re: OpenXSensor SPORT Interface

Hi,
kalle123 wrote: Badly waiting for a detailed instruction on https://code.google.com/p/openxsensor/wiki/
It will come, be patient ;)
But 2.2 is not integer. So the rest of my questions still open.
I don't understand your remark as the divider factors have 2 decimals precision...
OXSC_Volts.jpg
Bye.
by davx
Sun Aug 31, 2014 9:19 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 97450

Re: OpenXSensor SPORT Interface

@Kalle123,

To understand better, how did you connect the voltages measured to OXS ? (schematics)

Thanks.
by davx
Sun Aug 31, 2014 7:16 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

Hi,

New doc on the wiki: Vario settings

And the sidebar should work as expected !

Bye.
by davx
Wed Aug 27, 2014 10:28 am
Forum: openTx
Topic: Stick Modes changes on the Taranus
Replies: 3
Views: 1221

Re: Stick Modes changes on the Taranus

Hi,
AllanK1 wrote: Can I get a good template for 6 servo glider as a start point with flight modes. Where.
This is a pretty complete setup: http://www.rc-soar.com/opentx/setups/f3j/index.htm

Bye.
by davx
Tue Aug 26, 2014 4:56 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

I've added some new doc in the wiki: https://code.google.com/p/openxsensor/wiki/OXS_Configuration The navigation side bar is not working very well for the moment... I reloaded OXS_Configurator_v1.0_linux.tar.gz just 5 min ago again from here https://code.google.com/p/openxsensor/wiki/OXS_Index I was...
by davx
Tue Aug 26, 2014 12:00 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

Hi,
kalle123 wrote:Small issue with the gui ...
Could be location or rights on folder OXS_Configurator_v1.0_linux
br KH
I need more information to understand what the problem is:
- Did you download OpenXsensor v1.0 ?
- Where did you put openxsensor code ?
- What did you enter in the directory field ?

Bye.
by davx
Mon Aug 25, 2014 4:17 pm
Forum: openTx
Topic: Logical Swtiches - 'Edge' and 'Sticky'?!? (V2.0.8)
Replies: 22
Views: 7617

Re: Logical Swtiches - 'Edge' and 'Sticky'?!? (V2.0.8)

Yes I agree, FlipFlop and Pulse would be really more explanatory.
by davx
Mon Aug 25, 2014 11:18 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXsensor Configurator
Replies: 231
Views: 96099

Re: OpenXsensor Configurator

Hi, I thought of all the people who are not firm with reading data sheets etc. ;) There's absolutely no way to DIY without reading data sheet so... e.g if the telemetry shows 200mA when there is no current (open circuit) I want to correct this 200mA. As Kilrah said above, the right way is to know th...

Go to advanced search