openrcforums

Hi guys,

An animated Sequencer preview ! Yet some work before release... but close

Bye.

Hi everyone,

Just a little glimpse at what I'm working on currently
Have a nice Sunday !

Thanks guys !

Hi guys, I know it's been a long time since last OXS Configurator update but the wait is finished ;) The version I just released is probably not what you would expect but I guarantee it's a good start ! OXS_conf_v3.0.png I think the most valuable new features should be the check updates things: - wh...

Hi guys, I'm actively working on the configurator (almost completely recoding it) and you'll see a new version soon ;) Don't expect too much from this one, it will be a compatibility thing, but the others should come faster ! Rainer suggestion is very nice but as mstrens pointed out, it could be pro...

Sorry João but I don't understand what you mean... The sentence you've quoted is just the last comit comment of the branch you've selected.

Github is quite different from Google code, perhaps you need a little practice

Bye.

Hi everybody ! I've just set the new official openXsensor repository in the organization created by mstrens: https://github.com/openXsensor/openXsensor As you can see, I've decided to split the configurator from OXS for practical reasons and I'll set it up later in a new repository of this same orga...

@mstrens,

Ah ok, it's you who created openXsensor organization, I've tried to create it and the name was already used

You can add me (davxlw) as member of the Owners team if you wish.

Bye.

@sfabris and everyone,

I'm already looking into migrating openXsensor and I will follow your advice about organization.

I don't know yet if I'll make different repo for code, configurator... I think it should be possible to keep all in one repo without too much confusion, will see.

Bye.

Hi,

@nigelsheffield,
Just try the Mike version joined

Rudder moves channel 10.

Bye

Hi,

@nigelsheffield,

You can find some infos about building an OXS Vario here: https://code.google.com/p/openxsensor/w ... uild_Vario
There is a "Power supply considerations" paragraph

Bye.

Hi, For the moment you have the infos from the home page https://code.google.com/p/openxsensor/ and pictures there https://code.google.com/p/openxsensor/wiki/OXS_Documentation#Buildings_how-tos. I'm currently working on the Multiplex protocol for the Configurator and as I want to do it correctly, it...

Hi,

jhsa wrote: I searched the google code project page for a good description but couldn't really find one.

What particular description are you looking for ?

Bye.

Personnally I regret that oXs and configurator are not using the same variables for set up. This can create some confusion. I don't think mV per step is a user friendly unit and divider factor seems more simple to understand IMHO. :D THAT EXPLAINS IT!! That's already what I had wrote in response at...

Hi, @kalle123, I'm not sure what you mean, but if you're talking about differences between "Divider factor" in the Configurator and "MVOLT_PER_STEP" in the config file, it's normal, they are not the same value. When you enter a divider factor, it is then converted to mV/step in the config file. Furt...

Hi, That should probably go to the configurator google code page as an example?? I'm planning to do a complete guide on setting voltage measurements but I need time... I have spent some time printing out and studying oXs_config_description.h. An excellent guide, thank you for taking the time to writ...

Hi,

Some News !

OXS Configurator v2.1 can now be used to set all the new functionalities of openXsensor v2.5 !
The Wiki has been updated for the occasion

Bye.

Hi, I'm still trying to work out the correct way to select the track via S1 and logic switches. That part should work with the settings in the "Special Functions", the first 3 lines in the eepe I've joined: S12 -> BackgroundMusic -> "you file name" etc. Ok, so far I have managed to set up logical sw...

Hi,

I don't have 6 pos. switch but I think my setup joined below should work

Bye.

Hi,

stewlg wrote:So perhaps I just need to figure out how to use OpenTX's telemetry menu with Naze32, etc.

I've found this thread on RCG: http://www.rcgroups.com/forums/showthread.php?t=2172604

Bye.

Hi,

Make sure you've set up A2 correctly in the TELEMETRY menu.
For what I can see of your config, you need these settings:
Bye.

Hi,

The official announcement of openXsensor version 2.5 !

With numerous new features (2nd baro sensor, airspeed sensor...more in the Readme) !!

A big thanks to Michel (mstrens) !!

Bye.

Hi,

As you can see in the News there is a new OXS Configurator v2.0 !

It's now compatible with openXsensor v2.5 !

Bye.

was supposed to be humour, not sarcasm... Perhaps some language awkwardness...

Anyway, you're welcome for my help

Bye.

Hi,

It seems you didn't search very well

On this same forum: viewtopic.php?f=97&t=5374&hilit=haptic

Bye.

Hi, IMHO, if there is the exact same behavior, which is the case here, I would go for the simplest ;) Method 1 and perhaps method 2 depending on your setup preferences. PS: Isn't there an error in the input of the method 1: first line Source (Rud) ? Shouldn't be Source (Thr) ? I'm not playing with h...

Yes, it's the same update as the Taranis internal RF module is a XJT, how-to here:
http://www.rcgroups.com/forums/showthread.php?t=2138392

Bye.

Hi,

The RF module firmware update is here:
http://www.frsky-rc.com/download/view.p ... rmware-XJT

Bye.

Hi, I've made some tests with the new telemetry system (2.1 next) and I find really nice the sensors automatic detection and the * character blinking when receiving telemetry packets ! However, it would be convenient to have presets for the commonly used sensors in the dropdown list "Type" so that w...

@dandiy, Ok, another attempt :) In the eepe joined: - SG↑ => motor (CH1) -100% (off), timer 1 off, timer 2 off - SG- => motor (CH1) -100% (off), timer 1 off, timer 2 off - SG↓ => motor (CH1) 100% (on), timer 1 on, timer 2 on Now, if you go back to SG- => motor (CH1) -100% (off), timer 1 off, timer 2...