Search found 2222 matches

by bob195558
Fri Mar 13, 2020 2:07 pm
Forum: General Information & Rules
Topic: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)
Replies: 199
Views: 81549

FAA Recreational Flyer Registration Extended to Dec. 12, 2020

Most everyone, I believe, will NOT be registering under "Part 107".
What is Part 107 ?
See here for info about "Part 107": https://www.faa.gov/search/?q=what+is+P ... mit=Search
by bob195558
Fri Mar 13, 2020 1:46 pm
Forum: General Information & Rules
Topic: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)
Replies: 199
Views: 81549

FAA Recreational Flyer Registration Extended to Dec. 12, 2020

Another FAA Email Received
Note: Click on photo to enlarge.
FAA Recreational Flyer Registration.jpg
Also see here for more info: https://faadronezone.faa.gov/
by bob195558
Thu Mar 12, 2020 11:32 am
Forum: 3D Printing
Topic: Problem with Printing Blobbing, from Octoprint Pausing Transmission of Serial Data
Replies: 2
Views: 2414

Re: Problem with Printing Blobbing, from Octoprint Pausing Transmission of Serial Data

If you have the EZBoard, Tim has the new version of EZFirmware released. Note: a message from Tim Hoogland "TH3D", We've updated both our firmware branches for the EZBoard and stock machines with the new buffer sizes to help with Octoprint slowdowns. You can download them from our website or if you ...
by bob195558
Thu Mar 12, 2020 1:08 am
Forum: Hardware
Topic: Taranis Gimals in a 9X
Replies: 542
Views: 107642

Re: Taranis Gimals in a 9X

Has been very, very hard to find the pot's and they are junk anyways.
by bob195558
Wed Mar 11, 2020 2:57 am
Forum: Hardware
Topic: Taranis Gimals in a 9X
Replies: 542
Views: 107642

Re: Taranis Gimals in a 9X

Also see here for more install info: viewtopic.php?f=95&t=4281&start=90#p66589
by bob195558
Wed Mar 11, 2020 2:41 am
Forum: Hardware
Topic: Taranis Gimals in a 9X
Replies: 542
Views: 107642

Re: Taranis Gimals in a 9X

See here for FrSky Taranis Replacement Gimbals that are a great upgrade for the 9x: https://alofthobbies.com/frsky-taranis-replacement-gimbal.html Note: you will need to use a multimeter to make sure you have connected the correct wires, because with the 9x radio's, the wire color means nothing.
by bob195558
Tue Mar 03, 2020 8:16 pm
Forum: 3D Printing
Topic: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)
Replies: 4
Views: 2264

Re: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

For installing the new TH3D Tough Direct Drive Heatsink Extruder with All-Metal V6 Hotend
Click here: https://openrcforums.com/forum/viewtopi ... 29&t=12501
by bob195558
Mon Mar 02, 2020 1:44 am
Forum: 3D Printing
Topic: Problem with Printing Blobbing, from Octoprint Pausing Transmission of Serial Data
Replies: 2
Views: 2414

Problem with Printing Blobbing, from Octoprint Pausing Transmission of Serial Data

Problem with Printing Blobbing , is caused from Octoprint Pausing Transmission of the Serial Data Printing Blobbing_a.jpg When using a Raspberry-pi to run Octoprint, using a USB cable connected to your 3D Printer, you may get " Printing Blobbing ". The Raspberry-pi, running Octoprint, will pause the...
by bob195558
Wed Feb 19, 2020 11:45 pm
Forum: General Information & Rules
Topic: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)
Replies: 199
Views: 81549

Re: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)

New Email from Aloft Hobbies (February 19, 2020 About: FAA shutting down our hobby) Email from Aloft Hobbies.jpg Subject: We need your help! - FAA's threat to our hobby. We are running out of time to save our aviation hobbies! I'm sorry to bug you again with this FAA threat, but it is REALLY going ...
by bob195558
Mon Feb 10, 2020 9:27 pm
Forum: 3D Printing
Topic: Installing TH3D Tough Direct Drive Heatsink Extruder with V6 All-Metal Hotend (Upgrading CR10s 3D Printer)
Replies: 7
Views: 3275

Installing TH3D Tough Direct Drive Heatsink Extruder with V6 All-Metal Hotend (Upgrading CR10s 3D Printer)

TH3D Tough Direct Drive Heatsink Extruder with V6 All-Metal Hotend TH3D Tough Heatsink Extruder V6_cccc.jpg This upgrade helped a lot with the overall printing quality and with the printing of different brands and types of filaments. List of parts used for this Printing Head Upgrade 1) TH3D Titan (...
by bob195558
Sun Feb 09, 2020 12:30 pm
Forum: 3D Printing
Topic: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)
Replies: 4
Views: 2264

Re: New TH3D Tough Direct Heatsink Extruder / V6 (CR10 3D Printer)

Mandalorian Helmet failed_6a_24f.jpg Also checkout some Setting procedures and CR10 printer Upgrades Upgrade Control Board to the EZBoard Lite V1.2 (CR10s 3D Printer) https://openrcforums.com/forum/viewtopic.php?f=129&t=12346 Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer) https://...
by bob195558
Fri Feb 07, 2020 12:44 am
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

I am interested in one that is assembled. I just do not have the time get all the part to be assemble and learn where everything goes and to assemble then properly to the board. Plus flashing the proper program to the chip. Though it looks like a great hobby project that I wish I had the time to do,...
by bob195558
Thu Feb 06, 2020 1:32 pm
Forum: 3D Printing
Topic: Calibrate Extruder Estep Value (CR10s 3D Printer)
Replies: 1
Views: 918

Re: Calibrate Extruder Estep Value (CR10s 3D Printer)

Some more info about my Printer, may be helpful. List of Upgrades to my CR10(s) Printer 1) TH3D EZBoard Lite V1.2 (control board) 2) TH3D EZOut Filament Sensor 3) TH3D EZABL Kit - Direct Wire, Auto Bed Leveling 4) Dual Z- Screws with Single Stepper Motor TH3D Tough Direct Heatsink Extruder with V6 H...
by bob195558
Tue Feb 04, 2020 12:19 am
Forum: 3D Printing
Topic: Calibrate Extruder Estep Value (CR10s 3D Printer)
Replies: 1
Views: 918

Calibrate Extruder Estep Value (CR10s 3D Printer)

Every 3D Printer has it own unique value settings. So this is one of the important process's you should do for your 3D Printer, so it will be able to perform properly. This youtube video will be a help in guiding you through the process of calculating for your Extruder Estep Value: https://www.yout...
by bob195558
Mon Feb 03, 2020 10:33 pm
Forum: 3D Printing
Topic: Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)
Replies: 2
Views: 1086

Re: Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)

After this there are several calibrating process's that need to be done. 1) P.I.D. Autotune : https://openrcforums.com/forum/viewtopic.php?f=129&t=12350 2) Next go to " Store settings " to save your new values. 3) Calibrate Extruder Estep Value if you need to, find here: https://openrcforums.com/for...
by bob195558
Sun Feb 02, 2020 10:53 pm
Forum: 3D Printing
Topic: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)
Replies: 21
Views: 4201

Re: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)

RedCat Volcano EXP Pro 3D Printed Rims_b.jpg Finally have finished printing 4 new 3D Printed Rims and they look really great ! RedCat VOLCANO EXP-Pro RC 4WD Truck ..... Size: 1/10 Printed with PETG filament. Rims were design by: Madushan Heenatigala RedCat Volcano EXP Pro 3D Printed Rims_.jpg
by bob195558
Sun Feb 02, 2020 12:13 am
Forum: 3D Printing
Topic: Looking to buy a 3D printer
Replies: 8
Views: 1393

Re: Looking to buy a 3D printer

Hi Allen, Kilrah suggestion, I believe is a good option to consider. Tim at TH3D says the touch-screens restrict firmware features and options. Tim is selling "LCD Upgrade Kit" so to be able to get around this problem. One example: https://www.th3dstudio.com/product/cr-10s-pro-lcd-conversion-kit/ I ...
by bob195558
Sat Feb 01, 2020 1:03 pm
Forum: General Information & Rules
Topic: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)
Replies: 199
Views: 81549

Re: FAA Unmanned Aircraft Systems Registration 2015 (FAA registrations are reinstated 2018)

Email from Aloft Hobbies LET ME BE CLEAR: The FAA's proposed Remote ID will decimate the RC Model Hobby If you are like me and love flying remotely controlled aircraft, or would like to see the hobby continue to be an affordable and enjoyable, or just want to see its educational value continue for ...
by bob195558
Thu Jan 30, 2020 4:56 pm
Forum: 3D Printing
Topic: Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)
Replies: 2
Views: 1086

Re: Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)

1) Next after compiling the new successful configuration. 2) Down Load and "Save File" to a new folder on your computer. 3) Copy and Paste this "firmware" file to a blank Micro SD card. Note: there can NOT be any other files (stuff) on this Micro SD card. Also this firmware.bin file must have the fi...
by bob195558
Thu Jan 30, 2020 4:40 pm
Forum: 3D Printing
Topic: Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)
Replies: 2
Views: 1086

Flashing TH3D EZFirmware to EZBoard Lite V1.2 (CR10s 3D Printer)

Flashing TH3D EZFirmware to EZBoard Lite V1.2 for the CR10(s) Printer TH3D Tough Direct Heatsink Extruder with V6 Hotend_i.jpg List of Upgrades to CR10 Printer 1) TH3D EZBoard Lite V1.2 (control board) 2) TH3D EZOut Filament Sensor 3) TH3D EZABL Kit - Direct Wire, Auto Bed Leveling 4) Dual Z- Screw...
by bob195558
Fri Jan 17, 2020 2:12 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

I have one 9x radio with er9x on it which I can upgrade.
If I do this mode "Reverse Current Protection Mod for 9xtreme": https://openrcforums.com/forum/viewtopi ... 126&t=7745
how would this affect or is it needed ?
by bob195558
Fri Jan 17, 2020 2:10 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

Good point, was thinking it would be a help.
by bob195558
Fri Jan 17, 2020 1:24 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

Thank you Steve (torturedau), This is what I found for the list of 9Xtreme 2 Components needed. Click on pics to zoom in. 9Xtreme 2 list of Components_a.jpg 9Xtreme 2 list of Components_b.jpg Microsoft Excel (made some edits): 9Xtreme list of Components.zip Note: This Excel download component-list m...
by bob195558
Thu Jan 16, 2020 11:24 am
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

Is there a list of needed components put together ?
by bob195558
Wed Jan 15, 2020 6:21 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27699

Re: 9Xtreme being released to the public domain (opensource)

So (should) we are to be waiting to see how this new board is preforms before we place our orders ?
by bob195558
Tue Dec 31, 2019 12:06 am
Forum: 3D Printing
Topic: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)
Replies: 21
Views: 4201

Re: 3D Printed RC Truck Wheel Rims (CR10 3D Printer)

New upgrades help a lot when printing PETG filament. rim_design-fb3_PETG_RedCat_6ff.jpg 1) TH3D EZBoard Lite V1.2 Control Board https://www.th3dstudio.com/product/ezboard-lite/ 2) TH3D Tough V6 Hotend Direct Drive Heatsink Extruder (E3D Titan Aero) https://www.th3dstudio.com/product/th3d ... d-packa...
by bob195558
Mon Dec 30, 2019 5:10 pm
Forum: 3D Printing
Topic: 3D Printing with PETG Filament (CR10 3D Printing)
Replies: 15
Views: 3789

Re: 3D Printing with PETG Filament (CR10 3D Printing)

Here is an update on 3D Printing RedCat Truck rims with PETG filament. rim_design-fb3_PETG_RedCat_1aa.jpg After several upgrades I am able to 3D Print PETG filament without problems. List of additional upgrades to the CR10 Printer: 1) TH3D EZBoard Lite V1.2 Control Board https://www.th3dstudio.com/p...

Go to advanced search