Search found 2141 matches

by bob195558
Mon Nov 18, 2013 3:57 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 73723

Re: Search for Replacement 9x Potentiometers!

Hi Volumax and Kaos, Any one know if the Flysky CT6A or CT6B pot can be used on T9X? they are both made by Flysky. any chance they are the same. if they are, there are cheap CT6A/B out there people wants to throw away. Actually, I still have a CT6A sitting there. would be great it can be used for sp...
by bob195558
Sun Nov 17, 2013 2:00 am
Forum: er9x
Topic: er9x development
Replies: 3126
Views: 397567

Re: er9x development

Thank you Mike, for your Clarification on how trims work in er9x firmware. :D
by bob195558
Fri Nov 15, 2013 10:23 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 67361

Re: OpenXSensor SPORT Interface

Thank you for your reply NeilRogers ! :) Is Wayne at alofthobbies.com? ------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- :) Will there be ...
by bob195558
Fri Nov 15, 2013 4:45 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: OpenXSensor SPORT Interface
Replies: 522
Views: 67361

Re: OpenXSensor SPORT Interface

:)
Will this work with 9x Radio (er9x-FrSky firmware) using the FrSky XJT - JR/Graupner Type 16ch Duplex Transmitter Telemetry Module
and the X8R - 16 channel, Sbus, Smart Port Receiver and with a 3S Lipo battery ?
by bob195558
Thu Nov 07, 2013 8:12 pm
Forum: General help (FrSky Taranis radio)
Topic: Is FrSky now installing cheaper gimbals?
Replies: 21
Views: 4125

Re: Is FrSky now installing cheaper gimbals?

I received an email from a friend saying that FrSky is now installing cheaper gimbals in the newer made FrSky Taranis Radios. He said he was reading this on the HobbyKing FrSky Forum that they are putting in cheap gimbals into the Taranis Radio. I keep my eye on the HK forum and haven't seen anythi...
by bob195558
Sun Nov 03, 2013 10:50 pm
Forum: General help (FrSky Taranis radio)
Topic: Is FrSky now installing cheaper gimbals?
Replies: 21
Views: 4125

Re: Is FrSky now installing cheaper gimbals?

Thank for your replies! :D This is what I was thinking also but was not sure. One of the top selling features is the gimbals. (Quad ball-bearing gimbals with high quality potentiometers.) (Quad bearing gimbals that are silky smooth.) It dose not make sense to me that they would change the gimbals to...
by bob195558
Sun Nov 03, 2013 4:28 pm
Forum: General help (FrSky Taranis radio)
Topic: Is FrSky now installing cheaper gimbals?
Replies: 21
Views: 4125

Is FrSky now installing cheaper gimbals?

I received an email from a friend saying that FrSky is now installing cheaper gimbals in the newer made FrSky Taranis Radios. He said he was reading this on the HobbyKing FrSky Forum that they are putting in cheap gimbals into the Taranis Radio. Has anyone more information to the possibility that th...
by bob195558
Wed Oct 30, 2013 12:48 am
Forum: Hardware
Topic: What is the size of the 9x stick set screw?
Replies: 5
Views: 998

Re: What is the size of the 9x stick set screw?

I think this is what you are asking about and/or looking for: Alloy Anti-Slip TX Control Sticks Short (Futaba TX Blue) at HobbyKing.com (http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=23746) These will work great! and there are other colors to select from too. I do not know what ...
by bob195558
Sun Oct 20, 2013 2:51 pm
Forum: Software
Topic: Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)
Replies: 16
Views: 2703

Re: Big Problem I did something wrong with my Sky9x Rev3 Rad

I see cool!
I was not thinking of the probability that you had made changes to the SAM-BA program
and so was not understanding your statement.
OK cool! 8-)
by bob195558
Sat Oct 19, 2013 2:56 am
Forum: Software
Topic: Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)
Replies: 16
Views: 2703

Re: Big Problem I did something wrong with my Sky9x Rev3 Rad

Hi Mike, I struggled with what the proper terminology should be, I admit to not having a good understanding to what the whole process and/or some parts of the process should be labeled. My thinking was I am connecting my Sky9x Radio to the eepSkye software over the top of the SAM-BA software and/or ...
by bob195558
Fri Oct 18, 2013 8:47 pm
Forum: Software
Topic: Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)
Replies: 16
Views: 2703

Re: Big Problem I did something wrong with my Sky9x Rev3 Rad

Thank You again Mike ! I appreciate your help. :D My Sky9x Radio is able to connect to the eepskye program. Thank you for correcting the process sequences to install the CoProcessor firmware. I see what I was doing incorrectly now, I was mixing up the process sequences and inserting the wrong path a...
by bob195558
Thu Oct 17, 2013 9:07 pm
Forum: Software
Topic: Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)
Replies: 16
Views: 2703

Re: Big Problem I did something wrong with my Sky9x Rev3 Rad

:D THANK YOU !!! THANK YOU !!! THANK YOU !!! It is up and Running again! :D I do have an ALERT: Update Co- Processor Is this the process that I need to do next ? :?: 1) Down load the TinyApp.bin from: (https://github.com/MikeBland/ersky9x) 2) Plug USB cable between computer and Sky9x Radio. 3) Switc...
by bob195558
Thu Oct 17, 2013 3:56 pm
Forum: Software
Topic: Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)
Replies: 16
Views: 2703

Big Problem I did something wrong with my Sky9x Rev3 Radio. (Fixed !)

:) HI Everyone, This morning when I turned on my Sky9x Radio (Rev3) I get a blank screen and I have no USB connection to Win7 64bit. :o I think I must have done something wrong to the original ersky9x firmware (Jan, 2013) when trying to configuring SAM-BA so to try to connect to my Sky9x Radio. :oop...
by bob195558
Sun Oct 13, 2013 8:11 pm
Forum: Hardware
Topic: XJT Telemetry Module connection to Sky9x Rev3 Board
Replies: 19
Views: 2766

Re: XJT Telemetry Module connection to Sky9x Rev3 Board

:) Thank You Mike! I have the original erSky9x firmware on my Sky9x Radio and I believe I can use eepskye.exe to update to the newest revision erSky9x firmware. I could before I Close up the Sky9x Radio, is to tap into the other COM1, J10, 1, RXD-IND wire. :idea: Is it OK for me to Tap into the same...
by bob195558
Sun Oct 13, 2013 3:00 am
Forum: Hardware
Topic: XJT Telemetry Module connection to Sky9x Rev3 Board
Replies: 19
Views: 2766

Re: XJT Telemetry Module connection to Sky9x Rev3 Board

:) Hi Mike, In this photo dose this white wire for the S-Port connection, show what you were saying for the Pin 5 of the 9x back-board, connect to the Sky9x board serial connector? I plugged into the COM2, J21, 1, RXD-IND of the Sky9x board to the bottom Pin 5 of the 9x back-board. Is this the corre...
by bob195558
Sat Oct 12, 2013 3:53 pm
Forum: Hardware
Topic: XJT Telemetry Module connection to Sky9x Rev3 Board
Replies: 19
Views: 2766

Re: XJT Telemetry Module connection to Sky9x Rev3 Board

:D Hi Mike, Thank you for your helping, I have only recently been changing over to the FrSky Transmitters and have not studied on the pin 5 modification yet. I want use the S-Port, so I need to know more about how to make mods. The XJT has an external S-Port plug using the servo plug. Can this be us...
by bob195558
Sat Oct 12, 2013 3:28 am
Forum: Hardware
Topic: XJT Telemetry Module connection to Sky9x Rev3 Board
Replies: 19
Views: 2766

Re: XJT Telemetry Module connection to Sky9x Rev3 Board

:| I still think there is a problem when I turned the 4 pin connector plug around. It makes the: Red wire from the Sky9x Board's TXD connection to the Rxd pin of the XJT Telemetry Transmitter. This looks good! (Sky9x: TXD to Rxd of the Telemetry Module XJT) But the Black wire from Sky9x Rev3 Board's...
by bob195558
Fri Oct 11, 2013 5:21 pm
Forum: Hardware
Topic: XJT Telemetry Module connection to Sky9x Rev3 Board
Replies: 19
Views: 2766

XJT Telemetry Module connection to Sky9x Rev3 Board

:?: In the photograph, is the cable wiring correct ? :?: I see the Red wire from the Sky9x Board's TXD connection going to the GND (Ground) of the XJT Telemetry Transmitter. It dose not look right to me. :?: And I see the Black wire from Sky9x Rev3 Board's GD connection is connecting to the + 5V of ...
by bob195558
Thu Oct 10, 2013 5:38 pm
Forum: Hardware
Topic: Search for Replacement 9x Potentiometers!
Replies: 296
Views: 73723

Re: Search for Replacement 9x Potentiometers!

So the Hall Effect Device has the same resolution values as would be with the stock 9x Potentiometers?
by bob195558
Thu Oct 10, 2013 1:29 pm
Forum: Hardware
Topic: XJT module and 9x
Replies: 131
Views: 29972

Re: XJT module and 9x

Thank you Kilrah! Now I understand what was happening. I think when I have updated eepe I was not paying attention to where the updated version was being placed and therefore created several eepe active versions here and there. This also gives a reason to why I would update eepe and then when openin...
by bob195558
Wed Oct 09, 2013 12:52 pm
Forum: Hardware
Topic: XJT module and 9x
Replies: 131
Views: 29972

Re: XJT module and 9x

It's working correctly now. Thank you!!! Your eepskye.txt did work, but as it was opening it asked to update, ..... so I did, and it did the same thing as to open the eepe. But when I selected NO to update, ..... it opened in eepskye.exe like it should. Some how I have multiple versions of eepe here...
by bob195558
Wed Oct 09, 2013 5:39 am
Forum: Hardware
Topic: XJT module and 9x
Replies: 131
Views: 29972

Re: XJT module and 9x

when you download eepe now, it automatically install both eepe and eepskye. you need to run either eepe for er9x or eeskye for sky8x FW. create two short cuts, one for eepe, one for eepskye. I have the two Short Cuts (one for eepe and one for eepskye) on my Win7 64 bit computer desk top. But when I...
by bob195558
Tue Oct 08, 2013 7:32 pm
Forum: Hardware
Topic: FrSky Telemetry Connections and MENU Display Settings
Replies: 1
Views: 1505

Re: FrSky Telemetry Connections and MENU Display Settings

Here is some more Pictures.
by bob195558
Tue Oct 08, 2013 6:51 pm
Forum: Hardware
Topic: FrSky Telemetry Connections and MENU Display Settings
Replies: 1
Views: 1505

FrSky Telemetry Connections and MENU Display Settings

Hi everyone, I have received the FrSky hardware and have it installed and have some of the settings setup. I have done none of the older telemetry board mods. Here is the list of hardware that I have: HK Turnigy 9X Radio 9Ch Transmitter w/ Module & 8ch Receiver (Mode 2) and with firmware: SVN: er9x-...
by bob195558
Tue Oct 08, 2013 3:27 am
Forum: Hardware
Topic: How do I UNBRICK the Turnigy9x Radio Main-Board C
Replies: 8
Views: 2154

Re: How do I UNBRICK the Turnigy9x Radio Main-Board C

Thank for your help. I have seen this before, .... but I become overwhelmed with trying to understand what its all about. Many, Many, Many and very many, a lot of options and choices and I become lost in trying to understand what it is saying and/or what its talking about. :? The more I study it the...
by bob195558
Mon Oct 07, 2013 10:56 pm
Forum: Hardware
Topic: How do I UNBRICK the Turnigy9x Radio Main-Board C
Replies: 8
Views: 2154

Re: How do I UNBRICK the Turnigy9x Radio Main-Board C

I went to the location (http://openrcforums.com/wiki/index.php/Dealing_with_a_Fuse_Brick ) and nothing is there? It seems to be no understandable information of step by step instructions to Unbricking our Stock 9x Radio Main Boards. I am still hoping to find a way to restore this Stock 9x Radio Main...
by bob195558
Mon Sep 23, 2013 3:28 pm
Forum: Hardware
Topic: How to connect FrSky Battery Voltage Sensor (FBVS-01)
Replies: 57
Views: 18325

Re: How to connect FrSky Battery Voltage Sensor (FBVS-01)

Hi,
Mike is it possible to add the 1K0 R3 into the - Ground of the FrSky Battery Voltage Sensor (FBVS-01) circuit,
so that it could work like your Battery Voltage Sensor Circuit?
by bob195558
Sun Sep 22, 2013 3:41 pm
Forum: Hardware
Topic: How to connect FrSky Battery Voltage Sensor (FBVS-01)
Replies: 57
Views: 18325

Re: How to connect FrSky Battery Voltage Sensor (FBVS-01)

:D Thank You SM, Kilrah and Mike, One of the two Black - Ground wires, is NOT to be connected to its Ground, whether to the Receiver's A1 or A2 port or to the Black - Ground Side of the Lipo 3S Battery Power Source. :D I like the logic of Kilrah to have the measurement of the current flowing through...
by bob195558
Sun Sep 22, 2013 12:31 am
Forum: Hardware
Topic: How to connect FrSky Battery Voltage Sensor (FBVS-01)
Replies: 57
Views: 18325

How to connect FrSky Battery Voltage Sensor (FBVS-01)

Hi The instructions that came with the FrSky Battery Voltage Sensor say nothing about, NOT connecting the Black ground wires to the FrSky D8R-XP Receiver and the single Lipo 3-cell 12v Battery Power source. But at the Hobby King web file web page the FrSky Battery Voltage Sensor Manual (http://www.h...
by bob195558
Sat Sep 21, 2013 12:42 pm
Forum: Hardware
Topic: Questions about flashing before and after?
Replies: 3
Views: 746

Re: Questions about flashing before and after?

Thank You Reinhard and Mike
I was hoping every thing was as it should be, but I was not sure.
Thank you again,
:) Bob

Go to advanced search