Search found 1057 matches

by LTMNO
Mon Feb 15, 2016 11:49 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

There is some sort of configuration I need to get correct for the current measurement. I'm using a couple of power resistors to provide a current load. At one point I did have a current measurement that was just over double the actual current. I added a load of 1.9A and it changed to 4.3A, returnin...
by LTMNO
Sat Feb 13, 2016 1:02 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

Unfortunately, I have had no success with my Funduino Pro Mini 328/16 http://img.dxcdn.com/productimages/sku_244969_2.jpg http://img.dxcdn.com/productimages/sku_244969_3.jpg or Arduino Nano 328/16 http://buzzhobbies.com.au/image/data/Airbot/Bearhug%2018a/20150415_145223.jpg I connected the APM -> Ar...
by LTMNO
Thu Feb 11, 2016 9:20 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

I just posted the .hex I compiled and tested this morning (erksy9x test versions thread). The values being sent by the Arduino over SPort currently are: TEMP1 = APM mode ALTITUDE GPS COURSE VFAS = main battery voltage *BASEMODE TEMP2 == # satellites CURRENT RPM = engine speed *VCC *CPULOAD *HOME_DI...
by LTMNO
Thu Feb 11, 2016 2:39 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

However, I did test the Teensy code with your latest ersky9X Code. The compass works... some of the data is reporting... If I could map out which screen variable was which data point... I could re-arrange that for you for a flavour with Teensy? Then we can have a flavour for Arduino as I recall you ...
by LTMNO
Thu Feb 11, 2016 1:39 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

Mike, have you attached a compiled version of the Hex yet for APM_Mavlink_to_FrSky?
Could you just grab it from your compiled directory?
I also have a problem with compiling your folder and .ino file.
by LTMNO
Thu Feb 04, 2016 2:58 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

Thanks Mike, I guess the size of the code doesn't really matter much as long as it all works ;-)
Appreciate you working on this...
by LTMNO
Mon Feb 01, 2016 11:22 pm
Forum: General RC Electronic Projects and Discussion
Topic: 3D printer
Replies: 29
Views: 3438

Re: 3D printer

great print quality... nice job!
by LTMNO
Fri Jan 29, 2016 6:36 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

Awesome! Thanks, I am having memory lapses... I know we discussed this. ;-)
by LTMNO
Fri Jan 29, 2016 3:43 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 210
Views: 33200

Re: My 9Xtreme Installation

Sorry Joao, don't mean to post it like this... just wanted to offer it up as he is waiting for them... @9XTremist I have 2x Taranis Gimbals in the box(Brand New) if your interested. https://dl.dropboxusercontent.com/u/58223709/_WEB/9x%20Radio/Gimbals.jpeg I have had them for a while and never got ar...
by LTMNO
Fri Jan 29, 2016 3:11 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

Hi Mike, I was thinking last night... and I am sure we started to discuss this but just to reiterate.. I think the best solution would be both of these use cases... and I will just throw it out there as ideas... 1) Some people don't use FrSky. Some use oLRS and would like to have the ability to just...
by LTMNO
Wed Jan 27, 2016 4:57 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

No problem. Away on business for a few days. I can use arduino too if needed.


Sent from my iPhone using Tapatalk
by LTMNO
Wed Jan 27, 2016 12:52 am
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

UPDATE: After crossing the wires on the inside, I was able to get some data sent over... https://dl.dropboxusercontent.com/u/58223709/_WEB/Mavlink_Support/IMG_1552.JPG RPM changes with Throttle from 0 to 3000 units https://dl.dropboxusercontent.com/u/58223709/_WEB/Mavlink_Support/IMG_1553.JPG The N ...
by LTMNO
Tue Jan 26, 2016 8:14 pm
Forum: ersky9x
Topic: Adding MAVLINK support
Replies: 596
Views: 71895

Re: Adding MAVLINK support

@Brodziek, looks really good... @Mike, tested the first go with baud at 57 in APM Setup is : Proto to ArduP X8R --> Teensy on SPort --> APM Telmetry 9x with XJT Module Data flowing by connection to Tower App on Android Tablet. Able to arm, takeoff, etc... (The APM will still do this even if its not ...
by LTMNO
Tue Jan 19, 2016 10:03 pm
Forum: openTx
Topic: Send data through UART port
Replies: 24
Views: 2047

Re: Send data through UART port

Thank you!
Was there just the one screen?
Also, did you get good voice commands setup for this interface?
Would love to see them.

Cheers!
by LTMNO
Tue Jan 19, 2016 6:46 pm
Forum: 9Xtreme upgrade board
Topic: speaker hiss
Replies: 346
Views: 27475

Re: speaker hiss

ShowMaster wrote:Ok, got a spool of chipQuick .020 63/37 solder.
I'm good
Thats the good stuff.. ;-)
by LTMNO
Sun Jan 17, 2016 1:56 am
Forum: Hardware
Topic: 9X Telemetry Mod (Sanity Check)
Replies: 10
Views: 1793

Re: 9X Telemetry Mod (Sanity Check)

Happy to report some progress.... I couldn't wait on getting a FrSky Lite Converter from HK or other so I found an diagram on the WWW for SPort/XJT Signal Inverter. http://sizz.name/wp-content/uploads/2014/01/sheme.jpg Credit to.... After building it... I used a NPN 2N2222A instead of the BC337-40 (...
by LTMNO
Sat Jan 16, 2016 8:14 pm
Forum: Electronic Mods
Topic: FrSky telemetry sharing the ribbon with USBASP?
Replies: 7
Views: 3083

Re: FrSky telemetry sharing the ribbon with USBASP?

ah, thanks... amazing.. ;-)
by LTMNO
Sat Jan 16, 2016 6:21 pm
Forum: Hardware
Topic: 9X Telemetry Mod (Sanity Check)
Replies: 10
Views: 1793

Re: 9X Telemetry Mod (Sanity Check)

Thanks Kilrah/Mike, appreciate the information. I guess then, If I want Telemetry, which I do... and really all I want is my 9x to utilize all the wonderful information from APM/ArduPilot. I am running er9x(mavlink flavour) or openTx(mavlink). The problem is that I can't any flavour of something wor...
by LTMNO
Sat Jan 16, 2016 1:27 pm
Forum: Hardware
Topic: 9X Telemetry Mod (Sanity Check)
Replies: 10
Views: 1793

Re: 9X Telemetry Mod (Sanity Check)

Thanks Mike, regarding the one cable... if this radio were to be used with Mavlink or Ardupiolot, would the same be true?
Would I require inverter or straight through is right?
Say I setup the XJT in D Mode. Then I would use the Tx/Rx side (rs232?)
by LTMNO
Sat Jan 16, 2016 5:13 am
Forum: Hardware
Topic: 9X Telemetry Mod (Sanity Check)
Replies: 10
Views: 1793

9X Telemetry Mod (Sanity Check)

Hello my fellow 9x'rs... I have been experiencing some problems and would like a sanity check if possible if someone could go over the setup here. I have been following this image... http://api.ning.com/files/J*zMYSkl7KYm5ZPPbfqzXlIaNRMmB0hhONrOudhjDZPxn*iarLmLXUCmck6*7x1Q9Xwi3wGQc4dB1HbJRVrWZg__/Fr...
by LTMNO
Sat Jan 16, 2016 5:02 am
Forum: Electronic Mods
Topic: FrSky telemetry sharing the ribbon with USBASP?
Replies: 7
Views: 3083

Re: FrSky telemetry sharing the ribbon with USBASP?

JayC wrote:
Image
Great Mod, very clean...

just curious as to what you have going on on the top right with resistor and transistor i think?

Thanks
by LTMNO
Sat Jan 16, 2016 1:33 am
Forum: er9x
Topic: er9x development
Replies: 3087
Views: 287250

Re: er9x development

Those telemetry screens look significantly different from what I see with ersky9x Is that intentional? Or can I get them to look similarly? For example is it possible to show the armed status and the GPS orientation graphic? Edit: my mistake, I just realized that this was a mod of er9x for mavlink....
by LTMNO
Fri Jan 15, 2016 5:48 pm
Forum: openTx
Topic: 9x custom build openTX?
Replies: 5
Views: 1036

Re: 9x custom build openTX?

Hello tomari, thanks again for posting.. finally something 9x specific... not that it should matter...but still comforting.. -standard telemetry mod? -straight connection of 9x radio TX to RX and RX to TX? -you power your 3dr radio with 9x... so GND is connected too? or is this just consumption with...
by LTMNO
Fri Jan 15, 2016 5:32 pm
Forum: openTx
Topic: Send data through UART port
Replies: 24
Views: 2047

Re: Send data through UART port

What were you running on the 9x?
Opentx with Mavlink Option?

This is the only thread i have been able to find with someone doing anything with 9x. not the 9xr or 9xrpro.
All i have is 9x's and really want to get Mavlink going on it.

Thanks for posting.

So your Hex files is for the Arduino?
by LTMNO
Fri Jan 15, 2016 5:10 pm
Forum: er9x
Topic: ArduVoice-9x Voice Module with Arduino for the 9x Radio
Replies: 477
Views: 53814

Re: ArduVoice-9x Voice Module with Arduino for the 9x Radio

Hello all, has anyone printed out the boards and have any extra for sell?
Pls PM if you do.

Thanks.
by LTMNO
Fri Jan 15, 2016 2:39 pm
Forum: 9Xtreme upgrade board
Topic: speaker hiss
Replies: 346
Views: 27475

Re: speaker hiss

No fix as of yet on the 9Xtreme Hissing Noise...?
Did anyone try the new speaker yet? Did it do the trick?
by LTMNO
Fri Jan 15, 2016 1:00 am
Forum: er9x
Topic: er9x development
Replies: 3087
Views: 287250

Re: er9x development

@flybabo, thats awesome.. can't wait to see/read this.
Thanks for affirming the Rhetorical NoWay... ;-)
by LTMNO
Thu Jan 14, 2016 8:18 pm
Forum: er9x
Topic: er9x development
Replies: 3087
Views: 287250

Re: er9x development

Thanks, please don't forget about poor old er9x if possible. ;-) (just saying... or should those radios be retired?)
I have a few of those radios too... like many others...
by LTMNO
Thu Jan 14, 2016 6:41 pm
Forum: er9x
Topic: er9x development
Replies: 3087
Views: 287250

Re: er9x development

Mike, this project here is the "shizzle' when it comes to get APM data on the er9x. Is it possible to make this part of your release for m128-er9x? or ersky9x? It currently uses older Rx's sending data on the Digital side... would it be feasible to make work on SPort on X8R for sending data back to ...
by LTMNO
Thu Jan 14, 2016 6:30 pm
Forum: openTx
Topic: [MAVLINK] Input needed for MAVLINK ArduPlane / ArduCopter.
Replies: 60
Views: 19477

Re: [MAVLINK] Input needed for MAVLINK ArduPlane / ArduCopter.

Does anyone having this setup working on 9x... all i see is 9xr and i really don't know what the difference is other than a slight change in Motherboard...

but should be same....
if you upgrade to m128 that is and solder in the ISP Programmer wires.

Go to advanced search