Search found 265 matches

by Rad
Tue Jun 28, 2016 6:22 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

I believe you simply do not hold the button long enough until the module gets power. With no board it gets power instantly when you turn the switch on, while as Mike said with the 9Xtreme board in it only gets turned on after the radio has booted and all warnings are cleared. ing the button pressed...
by Rad
Tue Jun 28, 2016 4:44 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

My flysky module is FS-RM002 and the receiver are FS-R9B Also tried with some turnigy 9X8C V2 receivers. The binding process is exactly as you said, but still no way to do it with the 9xtreme. Is there anything I could do? Can I send the board somewhere to test it or does it have some kind of guaran...
by Rad
Tue Jun 28, 2016 2:48 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

Well, I have some strange news here. I did not do the power test yet, Im going to buy the 100ohm resistor tomorror to do the requiered PPM protection mod, just in case. But It has power and it "works" It really surprised me. It seems I can control my tank once the receiver is bound. Hope you underst...
by Rad
Tue Jun 28, 2016 9:03 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

No, when I removed the xtreme I just removed it.

I was able to bind the receiver but unable to do anything else.

If I could reflash with the stock firmware or even better with just er9x would be great.
by Rad
Tue Jun 28, 2016 5:23 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

Have you set the protocol for the EXTERNAL module to PPM? Mike. Yes, External protocol is PPM. I may have found the problem. When I was fighting with the sound problem with my defective speaker, I had to open and to close the radio 10.000 times. One of them I may had the radio switched on, so that ...
by Rad
Mon Jun 27, 2016 6:16 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Re: Can not bind.

The original flysky th9xb
by Rad
Mon Jun 27, 2016 5:51 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Can not bind.
Replies: 15
Views: 4081

Can not bind.

Hi everyone. As the title says, I can not bind my flysky with 9xtreme board. First of all I know how to bind, I have been using the smartieparts board 2.4 for some years, I have a 9xr pro and also played a bit with the stock 9x firmware. I tried with 4 different receivers and just cant bind. Maybe I...
by Rad
Sun Jun 26, 2016 3:34 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 10256

Re: PPM protection resistor

Thanks for your help, I´ll try to do it this week. :)
by Rad
Sun Jun 26, 2016 3:31 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Update: I wrote Steven about how to fix it, but we saw that it was broken beyond repair, so he is going to send me a spare one.

Excelent technical support. :)
by Rad
Fri Jun 24, 2016 8:35 pm
Forum: 9Xtreme upgrade board
Topic: PPM protection resistor
Replies: 30
Views: 10256

Re: PPM protection resistor

Is there any tutorial of how to do it?

Im not very good at soldering and it would be great if I see in a video how to do it.

A video showing how to do in any kind of board should be enough.
by Rad
Fri Jun 24, 2016 6:16 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Im going to write to Steve, maybe he knows how to fix it.

Thanks to everybody, Im going to click in the thanks button of all of you :D
by Rad
Fri Jun 24, 2016 5:04 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

When I said I did not heard anythink, I mean I did not heard that buzz too, but hey, I think I found the problem... I checked the speaker conector 10.000 thousand times, but not the speaker itself... Then I saw this: http://i1066.photobucket.com/albums/u417/Rad_Draven/Varios/IMG_20160624_185718045_z...
by Rad
Fri Jun 24, 2016 4:50 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

The question about the trim sounds was because they do not require the SD card. So if you have no trim beeps it is pointless to try playing with the card, if the settings are correct your issue comes from the hardware (speaker badly connected, speaker or board defective). I see.. The radio is brand...
by Rad
Fri Jun 24, 2016 4:49 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Another quick update, I tried with the SD Card from my 9XR PRO and still does not work.
by Rad
Fri Jun 24, 2016 4:43 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Ok back. SD Card formated to FAT32 with the slow format, files back in the SD Card and still no welcome or trim sounds...

The SD Card is detected in bootloader mode and in the normal mode it says is still present and ready.
by Rad
Fri Jun 24, 2016 4:24 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Speaker is well conected but I dont heard anything. Anyway I found a thread here in the forum with some clues, and the guy that was having problems fixed it formating the SD Card to fat32. Im doing that right now and we will see what happens. The Computer recognises the SD Card when in bootloader mo...
by Rad
Fri Jun 24, 2016 2:49 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Well, Im back at home. The radio does not beep, I move the 4 trim switches and it does not make any sound. In radio, audio haptic I have Volume 23 (That is the maximum) Beeper Norm Beep countdown OFF Minute beep OFF SPeaker pitch 100 Haptic Strength 5 Haptic Min Run 40 Also I took a look to model se...
by Rad
Fri Jun 24, 2016 11:29 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

Re: I dont have sound.

Yes, I have downloaded the audio pack from er9x.com and I think I put the files in the sd card as you said. And I dont have trimmer sounds neither...

Anyway I will try to do it again as soon as I arrive home in a couple of hours, and see what happens. Thanks!
by Rad
Fri Jun 24, 2016 9:01 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: I dont have sound.
Replies: 18
Views: 4604

I dont have sound.

Hi! I have just installed the 9xtreme in my flysky th9xb radio, I have also updated the firmware to the last version (Rev218 for the 9xtreme) After that I donwloaded the sound files from there and I put them in the SD card and got no sound, and also tried other link from somewhere here in the forum ...
by Rad
Thu May 19, 2016 8:09 pm
Forum: Turnigy 9XR PRO radio
Topic: Little help for removing the front case.
Replies: 2
Views: 765

Re: Little help for removing the front case.

Daedalus66 wrote:I use a Torx T-10.
Thanks!
by Rad
Thu May 19, 2016 5:25 pm
Forum: Turnigy 9XR PRO radio
Topic: Little help for removing the front case.
Replies: 2
Views: 765

Little help for removing the front case.

Hi, that is maybe the most stupid question in the entire forum, but what is the name and size of the screwdriver needed for removing the front plate?

Thanks!
by Rad
Tue May 17, 2016 3:40 pm
Forum: Hardware
Topic: Way to prevent antena breaking.
Replies: 1
Views: 2499

Way to prevent antena breaking.

Hi guys, Im bored of breaking the antennas on my Flysky-turnigy receivers. I always break it like this: http://aeroquad.com/attachment.php?attachmentid=3635&d=1306861643 So, do you know any effective way to prevent it? I was thinking myself of putting all the antena inside the receiver. I dont need ...
by Rad
Fri Apr 22, 2016 2:19 pm
Forum: ersky9xr
Topic: Some questions around here.
Replies: 4
Views: 809

Re: Some questions around here.

MikeB wrote:There is only one spare analog input, so only one switch may be converted using that. You may follow the video to get 3 switches converted, but if you want a 4th one, you will need to use a 3K9 resistor and one of the LCD signals (2, 6 or 7).

Mike.
Good, all clear now. Thanks!
by Rad
Fri Apr 22, 2016 1:17 pm
Forum: ersky9xr
Topic: Some questions around here.
Replies: 4
Views: 809

Re: Some questions around here.

Hi, thanks for your fast response, but Im still a bit lost... That digital input sounds a bit more hard than the analog way, so I think I'll stick with the analog path. In the tutorial on Rc tanks australia, he uses both spare pins and plugs a couple of JST wires, but in one side of the radio he use...
by Rad
Fri Apr 22, 2016 7:42 am
Forum: ersky9xr
Topic: Some questions around here.
Replies: 4
Views: 809

Some questions around here.

Hi everyone. Sorry If I ask well answered questions around here. Im a bit lost and the forum has loads of info. So, I have a Flysky th9xb with the smartieparts board (2.4 rev) That runs er9x software. I also have a 9xr pro that runs ersky9x. The questions are: Does it worth to upgrade my Th9xb to th...

Go to advanced search