Search found 266 matches

by Rad
Wed Feb 14, 2018 5:56 pm
Forum: Software
Topic: Realistic driving in land vehicles.
Replies: 42
Views: 5548

Re: Realistic driving ind land vehicles.

jhsa wrote:
Wed Feb 14, 2018 4:33 pm
All very possible.. what firmware and what radio are you using?

João
9xtreme and 9xr pro with ersky9xProvR221g2
by Rad
Wed Feb 14, 2018 3:47 pm
Forum: Software
Topic: Realistic driving in land vehicles.
Replies: 42
Views: 5548

Realistic driving in land vehicles.

Hi guys, today I need a little help in the software related area. My idea is to have the most realistic driving of land vehicles possible, so, I would like to have the throttle stick just for throttle and use the 3-pos ID switch for the gear selection. So, for example with the ID in center position,...
by Rad
Fri Jan 26, 2018 9:51 am
Forum: Hardware
Topic: Binding plug mod.
Replies: 1
Views: 566

Binding plug mod.

Hi everyone. First of all, thanks for all your knowledge sharing the software and hardware mods. I am doing almost every mod that I have seen in this forum to my Flysky 9x... And then I wanted to apport something new to you. I know I can not reinvent the wheel, but I just had an idea of a very easy ...
by Rad
Wed Jan 24, 2018 9:43 am
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 44633

Re: My 9Xtreme Installation

MikeB wrote:
Tue Jan 23, 2018 11:44 pm
You should be able to select EXT1 to EXT8 for switches and extra push buttons.

Mike
Thanks for confirming, Mike. I already ordered some push buttons. Ill update in a month or so when I receive them, lol.

It seems I cant stop adding things to the radio, and you, guys, are guilty. :lol:
by Rad
Tue Jan 23, 2018 3:23 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 44633

Re: My 9Xtreme Installation

jhsa wrote:
Tue Jan 23, 2018 3:09 pm
I have just checked my radio, I think I was wrong, and you might be able to use the other extra inputs. I use 5, 6, 1 and 2 for my switches, and i think 4 for my 3 position ELE switch..

João
Great news! Thanks :)

When I arrive home I will take a look to the software to see what I have to do.
by Rad
Tue Jan 23, 2018 2:36 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 44633

Re: My 9Xtreme Installation

I dont remember how many pins I used, I installed two 3-pos switches on each side of the radio... I think I should have enough free pins, because the shocket is quite big. The problem is that I believe that at the moment only EXT 1 to EXT 4 are implemented in the Ersky9x firmware to be used as extr...
by Rad
Tue Jan 23, 2018 1:50 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 44633

Re: My 9Xtreme Installation

Well, that depends on how many of the available digital pins have you used. :) I believe it is possible to do it also on the PRO radio. It is the only radio I still didn't mod with the pushbuttons. It is on my ans though. I did replace the 2 position ELE switch with a 3 position.. João Sent from my...
by Rad
Tue Jan 23, 2018 1:22 pm
Forum: 9Xtreme upgrade board
Topic: My 9Xtreme Installation
Replies: 212
Views: 44633

Re: My 9Xtreme Installation

Well, it seems I can not stop adding gadjets to the radio.

After replacing four 2-position switches with four 3-position ones, do you know if I can add some push buttons at the back of my 9xtreme? If yes, how many?

Is also possible to add them in the 9xpro?

Thanks!
by Rad
Tue Jan 23, 2018 1:02 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

About the flashing "Failed" error, I wish I could help you more. I tried and tried and tried until suddenly it worked. I have no idea why it did not work and then worked... Just in case be sure of connecting the wires correctly (check it three or four times if needed) and also when trying to flash c...
by Rad
Fri Jan 12, 2018 8:56 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Surprisingly after something like 40 atempts I managed to flash the module!!! I did the same again and again and again, but for some unknown reason it worked now. I flashed it with your compilation, Joao. Now in the BIND area it says 1.2.0.11 As always thanks your your priceless help! Now I know how...
by Rad
Fri Jan 12, 2018 8:48 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Ok, what version of Ersky9x? What COM port are you selecting when trying to flash the module from the radio? You should select COM2. João ersky9xProvR221g2 I selected both ports with exact results. I also tried with your compilation, with the new one that I did now, and with the old one I had from ...
by Rad
Fri Jan 12, 2018 8:28 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Well, now Im frustrated... After failing flashing your compilation, I followed step by step your video tutorials but with no success. I have been able to flash the bootloader (I keep the old files when I flashed it), but when trying to flash your compilation, the radio says it FAILED I did another c...
by Rad
Fri Jan 12, 2018 7:05 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

EDIT: im working on it
by Rad
Fri Jan 12, 2018 5:40 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

No, on COM 2 you want NOT INVERTED. make sure the "telemetry com port" in "Model Setup / Telemetry" is set to COM2. Wait, I will compile it for you.. and attach to this post shortly. I downloaded a version a couple days ago. See if you can flash it using the radio. João EDIT: Here it is the file. v...
by Rad
Fri Jan 12, 2018 11:55 am
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

It is always the best to compile it yourself. Then you make sure you have set all the options correctly. If you have the 9xttreme board and the module is connected on the module bay (external), then you need to compile the module's firmware with "TELEMETRY INVERTED". This could explain why the vers...
by Rad
Fri Jan 12, 2018 8:47 am
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

You don't annoy me at all. when you say the module does not work, what does it do? Check the link. https://github.com/pascallanger/DIY-Multiprotocol-TX-Module Scroll down, there is all the documentation. Don't flash pre compiled files. :( They might not be the right ones for your radio / module. Yo...
by Rad
Thu Jan 11, 2018 10:02 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Testing is the best.. But I think it will be ok for ground models João After having everything working, I had to screw something again, lol. I updated the bootloader (from 1.7 to 2.6) And I tried to update the multiprotocol module with the radio. I went to your link to download the latest version (...
by Rad
Thu Jan 11, 2018 7:16 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

jhsa wrote:
Thu Jan 11, 2018 7:06 pm
Much better..

João
Thanks mate. Then I will leave it like that. :)
by Rad
Thu Jan 11, 2018 6:50 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

IMG_20180111_195228.jpg
what do you think about this?
by Rad
Thu Jan 11, 2018 12:42 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Damn, I thought it was Ok like that. I use the radio for tanks, so all the stuff will be maximum 20 meters away from me... Is there any way of locating the antenna inside? The way Bob sugests is the most logic way, but due to my sons use my RC stuff, I preffer to have the antenna inside. It is more ...
by Rad
Thu Jan 11, 2018 7:35 am
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Uops, I wrote another post but vanished...

Anyway, I found the mistake, I had one wire conected wrong. Now everything works perfectly. Thank you very much.


This is how I fitted the module in the radio.
IMG_20180111_083153.jpg
by Rad
Wed Jan 10, 2018 10:06 pm
Forum: Hardware Mods
Topic: Another two modules thread. 2.0
Replies: 83
Views: 9410

Re: Another two modules thread. 2.0

Hi guys, some necroposting here. Finally I have my radio fully working and with all the mods done, the only thing left is I am still fighting with the multiprotocol module. So, 9xtreme, with ersky9xProvR221g2 flashed Multiprotocol module flashed following Mr Joao video tutorials. Im triying to bind ...
by Rad
Fri Dec 08, 2017 4:49 pm
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

Hey, I tried following your diagram, Bob, and it WORKS! At the beginning I even did not trie because I saw no track from the connector to anywere, but yeah, the track was at the other side of the board, lol. So thanks to you, guys, I managed to save one radio from destruction. Change the title from ...
by Rad
Fri Dec 08, 2017 11:16 am
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

First stick fixed! Works perfect! :D Im very happy, guys.

Now I only need some info regarding the other stick layout. I thought it was going to be the same.
by Rad
Fri Dec 08, 2017 10:56 am
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

Im startint to solder the wires to the PCB. I will update when I finish. Meanwhile I noticed the two pcb are different. How should I wire the other one?
100_3690.JPG
by Rad
Thu Dec 07, 2017 7:55 pm
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

MikeB wrote:
Thu Dec 07, 2017 6:31 pm
I've marked where the tracks go:
100_3696.jpg

Mike.
That is exactly what I needed! Tomorrow I'll try to do it following your diagram. There is still hope for the radio! :)

THANKS with big letters.
by Rad
Thu Dec 07, 2017 7:26 am
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

bob195558 wrote:
Wed Dec 06, 2017 10:18 pm
Is this helpful ? (viewtopic.php?f=95&t=2974)
Hi Bob, thanks for the help but it is not exactly what I need. Please see the picture attached.

100_3696.JPG
by Rad
Wed Dec 06, 2017 7:27 pm
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

Ok, now I have everything working except the gimbals. When installing the taranis gimbals I tried to do it as nice and clean as possible, so I tried to desolder the wires and solder the gimbal ones straight to the board... Well, its pretty obvious that it went wrong in one of the gimbals. After sold...
by Rad
Wed Dec 06, 2017 5:12 pm
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

MikeB wrote:
Wed Dec 06, 2017 5:05 pm
Did you flash er9x.hex or er9x-128.hex?
With a '128 processor you want er9x-128.

Mike.
I flashed er9x, but after reading you I flashed the er9x 128.
Vers V1 784 Mike, 16.01.2017 Er9x pr822 Mod FRSKY 128.

Is this the latest version and that I should flash, right?
by Rad
Wed Dec 06, 2017 4:52 pm
Forum: Software
Topic: Flashing er9x over ersky9x
Replies: 18
Views: 2142

Re: Flashing er9x over ersky9x

The error I get now, is this: ================================================================================= Arrancando AVRDUDE C:/Program Files (x86)/eePe/avrdude.exe -c usbasp -p m64 -U eeprom:r:C:/Users/rad_d/AppData/Local/Temp/eebackup.hex:i ===================================================...

Go to advanced search