Search found 465 matches

by RCHH
Thu May 04, 2017 8:04 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

B5 flashed to Horus no problem. USB ... In Device Manager, it shows as HID > USB Input Device > running on port 00003. Also shows up in Windows Control Panel > Windows Devices, Bluetooth and other devices as: FrSky Horus Joystick. Also shows up in Game Controllers, but there are no inputs active and...
by RCHH
Thu May 04, 2017 4:20 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

I have had the 'device not migrated' bunkum several times. In fact only on Sunday on the new laptop. One fix is to turn off windows fast boot. Has worked for me with a win 10 beta upgrade and the genuine 'bought' win 10. As it goes, win 10 has to a great degree taken me away from Linux - and that is...
by RCHH
Thu May 04, 2017 11:23 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

jhsa wrote:
Thu May 04, 2017 11:15 am
You don't need a logical switch? Just use it in the mix switch field..
Ch7 100% HALF switch (PB1)

João

Sent from my thor using Tapatalk
I did - at 11:30hrs lol! Easy as falling off a log. Can use it to pop the brake chute and dab the wheel brakes on my Typhoon ...
by RCHH
Thu May 04, 2017 10:39 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Ideal.

I found the PB (meaning 'Push Button?) switches - I was looking at it wrong and totally misunderstood them. They are working fine.
by RCHH
Thu May 04, 2017 8:30 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

B4 flashed to Horus no problem.

Haptic is operational. Length of buzz can be adjusted, but not strength. 0 thru 5 makes no change.

PB1-4 are showing and working in switchdiag. But I am still not seeing them in the Mixes SOURCE menu.
by RCHH
Wed May 03, 2017 7:37 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

B3 flashed fine to Horus. DSMx telemetry issue fixed. Zero lockups. 6-Pos switch delay is good. One has to turn it VERY VERY slowly to cause drop to 6P0. It would not happen in normal use. Have not got any music files on as of yet. I am not able to figure out where the inner trims - T5 & T6 as label...
by RCHH
Wed May 03, 2017 3:02 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Agreed in principle. But not what I was getting at really. IF the internal module was selected, and then someone by (mis?)adventure set telemetry to DSMx, then the radio locked up. And it is easily done - particularly when using the rotary wheel. It scrolls FAST! LOL! I am pretty certain Mike has fi...
by RCHH
Wed May 03, 2017 1:59 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Pots are ordered from Banggood. Generally a week to ten days with them now.

And my apologies about module selection. It is as you say.

Am in the process of checking what happens if one powers the radio on whilst it is being charged. So far cannot see any difference in current draw from the charger.
by RCHH
Wed May 03, 2017 12:53 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Oh - forgot! How to enable both modules? Once the box for internal or external is ticked, the other box vanishes. lol!
by RCHH
Wed May 03, 2017 12:51 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Outstanding Mike. I am wondering if there is any truth in the 'assumed' not using the Horus whilst charging it? I never did see a definitive answer to that question. But if not, it really is a PITA the battery life, and mine is the same 7.2V 2000mAh pack. I will have to get a spare one. Not sure whe...
by RCHH
Wed May 03, 2017 12:17 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: RE: Re: ERSKY9x Questions

I looked into it further this morning. It happens when I go to MODEL SETUP > TELEMETRY > select type, but, ONLY if the internal module is active. Switch to the External module and it is fine. I obviously can't test that radio, but when you change to the external radio are you also changing the COM ...
by RCHH
Wed May 03, 2017 11:53 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

I looked into it further this morning. It happens when I go to MODEL SETUP > TELEMETRY > select type, but, ONLY if the internal module is active. Switch to the External module and it is fine. So, in reality it is unlikely to happen under .normal. procedure, but as shown, it can happen. And not every...
by RCHH
Tue May 02, 2017 11:55 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Radio turned off. Can replicate issue - as soon as I scroll to DSMx the radio instantly locks up.

Have also checked telemetry with the D16(X)/X8R and see RX and SWR readings of 97 and 9 respectively.
by RCHH
Tue May 02, 2017 11:40 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Oooooo problem. I just went to the TELEMETRY setup screen to see what was what, scrolled to DSMx and the radio has locked up solid and will not turn off. The screen is on and only the BLUE LED. The RED LED is NOT on. Will have to remove the rear case to pull the battery. Note to self: Stay out of th...
by RCHH
Tue May 02, 2017 11:17 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

I am indeed seeing telemetry! RSSI(?) with D8 RX reading 90. Will try later with the X8R. Have checked the diagana for the sliders and pots. Indeed none of them begin to change the values near their end travels. In fact, if I VERY carefully rotate the pots, I can feel a very fine 'step' at which poi...
by RCHH
Tue May 02, 2017 10:47 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

B2 flashed to Horus fine. iXJT .... Success! Tried with non-EU LBT X8R and also D8R-II XP. Working fine! Have not tried with any EU-LBT RX as of yet. Excellent Mike! One thing I have noticed is even when calibrated, pots S1 & S2 and sliders L1 & L2 have a lot of travel from their end positions befor...
by RCHH
Tue May 02, 2017 7:20 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

B1 flashed to Horus no problem.

Unfortunately still nothing from the iXJT in D8 or D16(X)
by RCHH
Tue May 02, 2017 6:08 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Will get the B1 on shortly.

That 6-pos switch issue I suspect will be a PITA. For most operations I don't think a small realtime delay would be critical, unless someone uses a position for a get out of the poop function or suchlike. Even when they should really be using a rapid to get to switch.
by RCHH
Tue May 02, 2017 3:44 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

A9 flashed to Horus fine. iXJT is not working in X or D modes. Will not bind. Display change noticed. Looks fine. As for the bar for the 6-pos. Personally I would like it to be the raw value, rather than equi-spaced indications. However, nice equal steps would appeal to others and would give a 'tidy...
by RCHH
Tue May 02, 2017 10:57 am
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Horus uses a NiMh, so I suppose it might just do it! Just the one cup. :D :P Mind you, that happens anyway - the one VERY poor design 'feature' of it. No changing TX battery at the field, not fitting a LiPo as there is some fangled circuitry to do with charging. Horus would not be able to complete a...
by RCHH
Mon May 01, 2017 11:24 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Toast making is already available, just short the Tx battery :mrgreen: Mike. Hhahaha! Somewhat akin to what I did to the girl's Haynes Internal Combustion Engine model we built over the last week. The controller box was not 'starting' the engine, so I whipped a 1S LiPo into it. Unfortunately, in re...
by RCHH
Mon May 01, 2017 10:56 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Well, I was hungry and thirsty, and there was the Russian F1 GP on the telly when I was out flying. Testing ErSky Horus (acceptable name for it? What ya think?) and risking life and limb ... Not much of an ask really is it? Or should I be banished forever to the salt mines in Siberia? :o :shock: :D ...
by RCHH
Mon May 01, 2017 10:27 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

A8 flashed to Horus fine. Mike, I can confirm that the external XJT module works perfectly. Binding can be done vIa the button on the back of the module, or via the Protocol menu in Horus. Tested with various respective receivers in D8, D16(X) in both EU LBT and FCC flavours. No issues with any of t...
by RCHH
Sun Apr 30, 2017 1:02 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Mike, So far in probably 6 hours plus of bench testing with all sorts of different receiver makes and servos etc., and probably an hour of TX time at the field, there have been zero 'glitches'. Very much looking forward to future developments. Will be good to test the iXJT, as for some reason with F...
by RCHH
Sun Apr 30, 2017 10:38 am
Forum: ersky9xr
Topic: RESOLVED: Template does not setup mixes using TAER order?
Replies: 70
Views: 9505

Re: RESOLVED: Template does not setup mixes using TAER order?

Excellent stuff! Enjoy your 600 ... before you know it you will go flybarless and 12S setup! Lol!!!

I think I may well retrieve the 600ESP kit I have in the loft and get that in the air! Lol!
by RCHH
Sun Apr 30, 2017 2:39 am
Forum: ersky9xr
Topic: RESOLVED: Template does not setup mixes using TAER order?
Replies: 70
Views: 9505

Re: Template does not setup mixes using TAER order?

Just a little note: CYC1 - Is the Ele, and it should control the rear servo CYC2 and CYC3 control the left and right servos. I changed CYC1 and CYC2 around in the radio and now all is correct except when I add throttle the pitch on the blades goes negative and vice versa when I reduce throttle. Wha...
by RCHH
Sat Apr 29, 2017 11:32 pm
Forum: ersky9xr
Topic: RESOLVED: Template does not setup mixes using TAER order?
Replies: 70
Views: 9505

Re: Template does not setup mixes using TAER order?

Not sure on that. That setup works with the Orange RX module with and the Redcon RX. No matter though, as technically either can be made to work. He has 4 servos working so a modicum of juggling connections/swash/chan reversals if need be will get it going. If it were on my bench less than ten mins ...
by RCHH
Sat Apr 29, 2017 9:51 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKYTx (was ersky9x) Questions
Replies: 1968
Views: 295744

Re: ERSKY9x Questions

Horus flies! Courtesy of ErSky9X and Mr. Blandford!

Flew my AXN for three flights earlier this afternoon, totalling 45 minutes only, due to child minding duties! lol!

Went without a hitch.
by RCHH
Sat Apr 29, 2017 9:21 pm
Forum: ersky9xr
Topic: RESOLVED: Template does not setup mixes using TAER order?
Replies: 70
Views: 9505

Re: Template does not setup mixes using TAER order?

Use the standard heli template and amend as follows: (Throt) CH1 = THR + All the ID mode mixes and the R-100 throttle cut. You can then use throttle failsafe on your Redcon 7 RX. (Ail) CH2 = CYC1 (Ele) CH3 = CYC2 (Rud) CH4 = RUD (Gear) CH5 = GEAR (Aux1) CH6 = CYC3 Those are is the basic connections....
by RCHH
Sat Apr 29, 2017 7:22 pm
Forum: ersky9xr
Topic: RESOLVED: Template does not setup mixes using TAER order?
Replies: 70
Views: 9505

Re: Template does not setup mixes using TAER order?

Oh the 600 will be soooo easy to fly compared to tje 450. It will hover hands off long enough to have a cup of coffee in comparison! Haha! If you do damage it and run out of head repair parts, or decide to go FBL, get a DFC conversion by Align (not at all costly really probably $75?) and a mini-kbar...

Go to advanced search