openrcforums

SD-Card logging?
Best regards
Christoph

You have to use a logical switch to create a trigger and a special function to create the sound. Regards
Christoph

Hello, I have set up an openXsensor with 2x GY63. The 2nd sensor contains a connection for a TEK nozzle. My target is to use sensor one for altitude, sensor 2 with TEK nozzle for vertical speed. When I configure the sensor to use both MS5611, I have regular outliers in the values of Vspd and Vspd2 (...

Sure you used the right firmware version?
You wrote X8R and Pro. These are different receiver.
Also look for version V1.x or V2.1

Regards
Christoph

Sure you used the right firmware version?
You wrote X8R and Pro. These are different receiver.
Also look for version V1.x or V2.1

Regards
Christoph

Test complete, it runs. The test in the air is open, because of weather.
But in most of my sailplanes (F3B, F3F) i'm using a 6 chanal rx, so there is no PWM port free.
Do you see a possibility to use S-Port for input?

Best regards
Christoph

Great, i will test next weekend. But two questions : The PWM signal needs a additional input on arduino or is it used from SPORT? How "fast" should the triangled wave on PWM change? I am already using a sensor for link quality with a separate arduino via SBus and i'm happy to combine it wi...

I have uncommented KMH in OXS and selected KMH in Horus Tx Telemetry

Leave mph in OXS and select kmh in TX. The TX will convert from miles to kilometer

Regards
Christoph

Thanks mstrens. Now i understand the value "1.000.000" --> it's from microsecond. and the difference is also in microsecond's. I presume that the original Frsky sensor sent the number of pulses per second and it is openTx that converts it into rotations per minute taking care of the number...

Hi, i've installed a oxs in my heli an tryed to get correct values from a rpm-sensor (hall-sensor TLE4905, two magnets on maingear). Actual i have some problems to understand the code inside oXs_general.cpp ISR( TIMER1_CAPT_vect, ISR_NOBLOCK ) { uint16_t elapsed ; uint32_t eventTime ; uint32_t diffe...