Search found 1454 matches

by Daedalus66
Tue Jun 18, 2019 12:28 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

All making sense.
by Daedalus66
Mon Jun 17, 2019 3:08 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

Re: ERSKY9X Coding

As I understand it, subtrims are not subject to Flight Mode. So you could transfer any FM0 trims to subtrim. But then the other FM trims would need to be reset.

I’ll have to think a bit about the implications of the new Instant Trim setup.

Definitely something for the manual
by Daedalus66
Sun Jun 16, 2019 8:44 pm
Forum: General help (FrSky Taranis radio)
Topic: Question on switches
Replies: 4
Views: 130

Re: Question on switches

Exclamation mark before switch name means “not”. So “!SA(up)” means either SA- or SA(down).

It’s not up so it must be either of the other two positions.
by Daedalus66
Sat Jun 15, 2019 1:18 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

Thinking a bit more, it seems to me now that the main risk is indeed that the pilot might forget (or just not know) that Instant Trim is live.

On the other hand, I still can’t imagine a realistic scenario in which more than 25% correction (subtrim) would be needed via IT.
by Daedalus66
Fri Jun 14, 2019 7:36 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

As implemented now, pressing the switch again will not restore the original setting. If the sticks are centred, it will do nothing. The way Instant Trim works is for the pilot to hold the stick(s) off centre (so as to maintain level flight), press/flip the IT switch, and release the stick. This appl...
by Daedalus66
Fri Jun 14, 2019 2:54 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

So what do you think about the 100% subtrim capability of Instant trim? Is it OK? Should it be restricted to 25% like trim?

I’m starting to think don’t fix if it ain’t broke.
by Daedalus66
Thu Jun 13, 2019 11:47 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

Not sure how this got off track. I thought it was clear that what we talking about was how Instant Trim should be implemented. I don’t think either Mike or I could be seen as suggesting any change to Subtrim itself. Just to reiterate, I think the change to IT made by Mike in the latest version (appl...
by Daedalus66
Wed Jun 12, 2019 11:28 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

Re: ERSKY9X Coding

I had never thought of Instant Trim as being a way to give huge amounts of correction, just a quick way to apply relatively modest ones — certainly less than 25%. That’s the way I’ve always used it, and my concern was that having the ability to use up to 100% subtrim introduced the possibility of in...
by Daedalus66
Tue Jun 11, 2019 5:09 pm
Forum: General Information & Rules
Topic: Comeback
Replies: 40
Views: 1348

Re: Comeback

ERSky9x was developed specifically for the Sky board, as the name implies. Mike B was the developer and still supports it here.
by Daedalus66
Fri May 31, 2019 2:47 pm
Forum: openTx
Topic: irange irx4plus channel order
Replies: 7
Views: 296

irange irx4plus channel order

Thanks Daedalus. I fully agree to your Bottom line. But two last questions: 1) If I change the channel order in the "Radio Setup", "Rx channel order", this has no effect on mapping the sticks to the receiver inputs. With this experience I ask myself what this parameter finally works on (if changes ...
by Daedalus66
Thu May 30, 2019 11:59 pm
Forum: openTx
Topic: irange irx4plus channel order
Replies: 7
Views: 296

irange irx4plus channel order

The module’s automatic translation of channel order from AETR to the Spektrum order of TAER is a major simplification for anyone who uses other protocols, as it means all protocols can use a standard order of AETR and the transmitter firmware can have that as its default order. On the other hand, if...
by Daedalus66
Tue May 28, 2019 11:46 pm
Forum: openTx
Topic: Variable Speed on Motors
Replies: 1
Views: 133

Re: Variable Speed on Motors

I'm going to switch my electric float plane with 2 motors from my Futaba to my X10S. I have each motor set up on a seperate channel. I have a switch set up to couple the throttle on the motors to the rudder. This way on taxi out as I move the rudder to the right I will get more throttle on the left...
by Daedalus66
Mon May 27, 2019 7:29 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X on Taranis
Replies: 474
Views: 60990

ERSKY9X on Taranis

ERSkyTX on the new Taranis X9-Lite - first flights. Three flights on my Durafly Tundra with the new radio. I’m liking the feel of the radio - compact with very decent sticks. Lighter and more comfortable than the QX7. Using RX6R with ACCESS firmware. https://uploads.tapatalk-cdn.com/20190527/0b41004...
by Daedalus66
Wed May 22, 2019 11:37 am
Forum: The Pickled Gnu (The Pub)
Topic: IRangeX 4in1 Plus fw flashing.
Replies: 53
Views: 8513

IRangeX 4in1 Plus fw flashing.

I have successfully constructed a Blade 230S v2 model for the Taranis X9D and flight tested it. I intend to write it up, but for now feel free to contact me via PM if you need information.
by Daedalus66
Wed May 22, 2019 1:08 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

ERSKY9X Coding

Thank you Mike and Joao for getting me back on track. The X9-Lite appears to be unscathed by its encounter with reverse voltage. Here’s the story. I’ve explained how I managed to misinterpret the polarity markings and connect a 6 cell NiMH battery (for the QX7) to the wrong battery springs. When tur...
by Daedalus66
Tue May 21, 2019 1:52 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

Re: ERSKY9X Coding

Thanks Mike. Totally my fault. I misinterpreted the polarity (despite checking three times!) and applied reverse voltage. Now with correct polarity, I see the “OpenTX” screen but then it blanks out and shuts down. Slight noises while this is happening. No obvious signs of burnt components. I have an...
by Daedalus66
Tue May 21, 2019 12:42 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4453
Views: 360619

Re: ERSKY9X Coding

Hi Mike Just received an FrSky X9 Lite. It looks and feels fine but does nothing when the button is pushed to turn it on (powered with six NiMH while I wait for 18650). Presumably, it's necessary to load ERSkyTX before anything works. I put the xlite file into a FIRMWARE folder om the SD card and tr...
by Daedalus66
Wed Mar 27, 2019 6:38 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: IDLE switch for winches
Replies: 6
Views: 814

Re: IDLE switch for winches

Just for information. The switch you are talking about has nothing to do with idle. It’s usually simply referred to as the “three-position switch”. The three positions are called ID0, ID1, ID2. Or when the switch is used to control Flight Mode they are called N, 1, 2. Sent from my iPad using Tapatalk
by Daedalus66
Tue Mar 05, 2019 4:53 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 3973

Re: Onboard Glow Igniter With ATtiny85

Just one more thing, those glow starters with battery never worked well with my engines.. After I built the power panel for my flight box, never had a single problem, apart from the engines being stubborn once in a while of course :) João The problem is that the glow starter batteries are often too...
by Daedalus66
Tue Mar 05, 2019 4:43 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 3973

Re: Onboard Glow Igniter With ATtiny85

Will rather use switching voltage regulator, as you do, just focus on 1.5V on its output with no manual calibration or adjusting to any particular plugs. It should work with all glow plugs currently on the market. :). All the modern plugs I know of are designed for 1.2v. I’m not saying they won’t t...
by Daedalus66
Tue Mar 05, 2019 1:01 am
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 3973

Re: Onboard Glow Igniter With ATtiny85

Plugs certainly were made for 2v, but we’re talking quite a few years ago.


Sent from my iPad using Tapatalk
by Daedalus66
Mon Mar 04, 2019 2:27 pm
Forum: General RC Electronic Projects and Discussion
Topic: Onboard Glow Igniter With ATtiny85
Replies: 52
Views: 3973

Onboard Glow Igniter With ATtiny85

Plugs are (or were) made specifically for 2.0v lead acid cells, 1.5v carbon-zinc cells (such as the big old #6 cells), and 1.2v NiCd (not in those days NiMH) cells. Most of the ones available today are designed for 1.2v. I would expect that running them on 1.5v constantly would shorten their life. B...
by Daedalus66
Sat Feb 02, 2019 3:59 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2350

Re: Lemon Telemetry with ErSky9x

Mike

Send me your postal address and I’ll send you a Lemon receiver with vario/altitude.

Nigel


Sent from my iPad using Tapatalk
by Daedalus66
Fri Dec 28, 2018 10:55 pm
Forum: ersky9xr
Topic: Model saved when flashing?
Replies: 1
Views: 142

Re: Model saved when flashing?

No, but it’s a really good idea to make a backup in case something goes wrong. I’ve never lost a model when upgrading.

Note that you will need to check each model if the update is from an old version.


Sent from my iPad using Tapatalk
by Daedalus66
Mon Dec 17, 2018 1:16 am
Forum: The Pickled Gnu (The Pub)
Topic: RcGroups in trouble??
Replies: 11
Views: 2162

Re: RcGroups in trouble??

No problems with RCGroups using Safari on my iPad. But of course it may have been down when I wasn’t trying.


Sent from my iPad using Tapatalk
by Daedalus66
Sun Dec 16, 2018 5:51 pm
Forum: The Pickled Gnu (The Pub)
Topic: RcGroups in trouble??
Replies: 11
Views: 2162

Re: RcGroups in trouble??

Yes, I’ve had to go to a regular browser to access RCGroups for a week or two. Tapatalk does work with it (though it’s OK here).


Sent from my iPad using Tapatalk
by Daedalus66
Thu Nov 29, 2018 1:38 am
Forum: erskyTx (was ersky9x)
Topic: Lemon Telemetry with ErSky9x
Replies: 41
Views: 2350

Re: Lemon Telemetry with ErSky9x

You’re quite right. The LM0030 provides only altitude telemetry, not vario. The LM0052 provides both.
by Daedalus66
Tue Oct 16, 2018 6:24 pm
Forum: openTx
Topic: I have searched and read and tried for 2 days to get the 9xr pro to work
Replies: 10
Views: 790

Re: I have searched and read and tried for 2 days to get the 9xr pro to work

The 9XR Pro was designed to use ErSky9x. It could at one time use OpenTX as well, but I believe the newer versions of OpenTX are no longer compatible.

ErSky9x will do the job.

Go to advanced search