openrcforums

Here you go: http://fr.farnell.com/c-k-components/ts ... dp/1908271

Thanks mike. So no problem in having version 5 of the co-processor right?

Version 5 is the most recent version of the co-processor, released after Brrent issued the Version 3 board. Mike. Then its ok? Is everything as it should now? The value of three pins of the tiny's connector are returned with all the other data, Port B bits 1,3 and 7. These are programmed to be inpu...

Rob Thomson wrote:Well done Mike. You deserve it!

Me being slow to the party did not even see the rcgroups post!

Me too. I'm sad I could't contribute

Thanks Kaos. Saw that later. I think the problem is solved, at least I hope so. The copro field now shows number 5??? Or should be 4. And the clock seems to be working fine. It was the RTC battery that was causing the issue. Dont know why or if it's normal, but after removing the backup battery had ...

Thanks guys.
Kaos, sorry for this question, but I dont want to make any mistakes.
the fisrt thing in the document you posted says "you will need to update your SAM-BA, co-processor applet". Can you point me to the directory were to instal the file?

This link was dialog I had in August when I was walked through my coprocessor not being programmed. If I'm not off topic here. SM http://openrcforums.com/forum/viewtopic.php?p=27319#p27319 Sent from my iPod touch using Tapatalk. What was the problem and how did you solve it? Don't know if what I'm ...

sycons wrote:Do you close, Samba in between and disconnect the board? You should

Gesendet von meinem Galaxy Nexus mit Tapatalk 2

Yes I do.

ShowMaster wrote:If you throw it away you'll discover later that it really is part of the tx.
Always works for me.
SM


Sent from my iPod touch using Tapatalk.

Top one
Sorry guys, couldn't help it

I have tried to re-create the error you are getting. Even a blank Attiny , will accept the download , and not generate any error messages. Can you walk me through the steps you are doing to cause this... -Brent Thanks Brent. Did a full erase with the jumper, as you suggested. - Plug the usb and pow...

Thanks Rob, and maybe I'm misunderstanding something but all this is new to me. The guide you are referring has, indeed, some info on how to flash the co-processor, and that may be my problem, because I keep getting this error. What I would like to know is how to do this that Brent suggested: "...

Gone??? I can see them here: http://openrcforums.com/forum/viewtopic.php?f=26&t=8&start=30#p34621 and in your reply. What exactly do you need? Do you want a larger image? Some detail in particular? If you need anything just ask. Had to open the radio to do a full erase (see here ). Since it'...

Did a full erase with the jumper, and instaled everything again, but the problem remains. Still nothing in the copro field. I've been reading the topic Rob recommended but cant find a how to on the bootloader re-load. Can someone point me a walkthrough and what is neeed to get it done, like software...

Thanks SM, I like these life packs also. Fit nice in the battery compartment and has room to accommodate the adapter. And for the price, I don't think we could ask for more.

I'm thinking in buying this with 1 mm thick. I have to cut it then (don't know where yet), if I need to replace mine.
When I was doing mine I measured it with a digital caliper and the original lcd cover was 1.2 or 1.3 mm thick.

Can you point me to one?
I have this one, I use for my other 9x with the stock board. Will it do?

SkyNorth wrote:I have never seen this error ..maybe try a full ERASE with the jumper.. and start new
Other than that , maybe the ATtiny has lost its bootloader. , it would have to be re -programmed with a programmer.

I will try the erase and do fresh install, but if necessary how do I program it?

And how do I install it? Or it's not necessary?
I keep getting this script error in SamBa

Scott, can't you cut the vinyl label in the laser cutter?

This is how I did it on mine. Bought this 2 cell balance lead, and on the other end applied a futaba type servo connector. Removed the extra wire and it's done. This extension is always plugged in the radio. This way, I will never switch the polarity accidently and I dont have to always connect and ...

Here's mine. Now that is strange

Yes , I shipped the boards with the bootloader and Tiny code 04 loaded The field should have two sets of numbers 00 00 , would mean no- bootloader It should say 01 04 , to show It has a bootloader and code rev 04 -Brent Not on my board. With latest open9x the copro field is like this "---"

Rob Thomson wrote:What does it say on the system menu - the CoPro: field?

Long right click. (Maybe 1 or 2 windows along)

Brent... I assume the boards all shipped with the co-pro firmware installed?

Nothing. The copro fied is hempty on mine.

I wanna v3 board... :( :mrgreen: You can have mine. 95.00 (as I bought it) plus shipping back to canada. I have soldered every pin out there is and the backup battery tray to the board. I will throw in a 7 way wheel encoder soldered on the I/H board already. the spker came with the board and the wi...

another 1 here

zuadha wrote:nice one nfs !!! btw can u make sticker template for casing ring around the gimbal? it would be nice

I could try, but can you elaborate more. Don't understand what you mean by "around the gimbal". You want a sticker for the casing around the gimbal or one for the gimbal itself.

Nice labels. How durable those labels and the glue on the back are? I always have a problem withe the label right above the sticks, because that is where I finger holding the Tx rest. the stock protective film just wrinkles up then the printing get messed up after a while. I added a transparent vin...

i just inserted a CR2032 battery into the battery holder of the sky9x v3, but unfortunatly the date/time always starts again and again from the time I set on my 9x when I power on the Transmitter. I am using open9x for sky9x. Anyone else having this? is this an issue of open9x or the hardware? I'm ...

BTW, the only thing I can critique about the file is four of the labels are in CMYK black and the other three labels are in RGB black. It will cause inkjet printers to print the black a little different. Thanks again. Thanks Daryoon, don't know what happened, but missed that. Uploaded new files in ...

thomas9x wrote:

Sorry guys, for taking so long. Here they are...
If you need anything just say.

Awesome! Now I'm off to find something online that will convert the files to a format that I can edit.

- Thomas

What's the type of file you need?