Search found 36 matches

by Galand
Fri Mar 13, 2020 1:28 pm
Forum: 9Xtreme upgrade board
Topic: 9Xtreme being released to the public domain (opensource)
Replies: 110
Views: 27676

Re: 9Xtreme being released to the public domain (opensource)

I would also be interested in an assembled board.
by Galand
Sat Nov 02, 2019 5:48 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

OK, this is possible. Run eepskye and load your EEPROM from your existing radio. Right click on each model and select "save model/settings". Confirm the file dialog (you might select a different directory). You may leave eepskye now. Now connect to the SD card on the T16, make sure there is a "MODE...
by Galand
Fri Nov 01, 2019 11:23 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

All good! The Drive E: is the SD card, the Drive F: is the actual firmware on the radio. The Drive F: should have a volume name, what is it please? As I mentioned a few posts back, the T16 doesn't have any EEPROM, so the Drive F: doesn't have an "EEPROM.bin" file on it. All the radio setup and mode...
by Galand
Fri Nov 01, 2019 12:46 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

Do you know what file the bootloader is in? Or is it the one that was on the radio when you first got it? When in the bootloader, and you plug in the USB cable, do you hear the "USB device connected" tones? If so, can you tell what device is now connected? If the bootloader presents hard drives, th...
by Galand
Wed Oct 30, 2019 9:31 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

Mike,
What condition inside of eepskye triggers the "Tx Not Mounted" message?
Maybe that would help me troubleshoot my problem.
Thanks
Dirk
by Galand
Tue Oct 29, 2019 12:45 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

Oops, I forgot you are using a T16. This doesn't have EEPROM, everything is on the SD card. I haven't got round to updating eepskye to handle that yet. Does the SD card show up as a drive in file explorer when using the openTx bootloader? Mike No, it doesn't and that is why I suspect a USB driver i...
by Galand
Mon Oct 28, 2019 10:27 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

On the erskyTx test version thread, there is an update to eepskye (actually several!). The most recent is dated 22-Feb-2019. Please try that, download the file, rename eepskye.exe in your eepe directory (so you may revert if needed), then copy eepskye.exe from the downloaded .zip file into your eep...
by Galand
Mon Oct 28, 2019 12:49 am
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

The bootloader declares the volume name of the (pseudo) drive that is the flash and EEPROM memory. It may be that the openTx bootloader is now using a different name. If you connect the USB to your computer, what is the volume name of that drive? What revision of eepskye are you using (revision and...
by Galand
Sun Oct 27, 2019 7:47 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

Download "ersky9xProvR222d5.zip" from the test version thread and extract "t16_rom.bin". If you don't have eepskye installed, please install that. First off, try starting the T16 in bootloader mode (trims held inwards), run eepskye and try the "Flash firmware to Tx" button, select the t16_rom.bin f...
by Galand
Sat Oct 19, 2019 8:10 pm
Forum: erskyTx (was ersky9x)
Topic: ERSKY9X Coding
Replies: 4521
Views: 504801

Re: ERSKY9X Coding

I've just posted a new test version. This includes support for MULTI_TELEMETRY. I've also included versions for the X9Lite and the T16. Support is also included for the multi module operating as a receiver for trainer purposes. Mike Hi Mike, I have now OpenTx on my T16. I would rather like to use E...
by Galand
Sun Sep 22, 2019 8:49 pm
Forum: erskyTx (was ersky9x)
Topic: ErskyTx Test Versions
Replies: 109
Views: 136528

Re: ErskyTx Test Versions

Hi Mike,
Any progress on the T16 front?
by Galand
Mon Mar 04, 2019 3:29 am
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Re: FRSKY R9M compatibility?

That would be nice because configuring a moderately complex model on the Tx is laborious. As I just found out :-)
by Galand
Sun Mar 03, 2019 11:15 pm
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Re: FRSKY R9M compatibility?

Sorry, I did not see your reply before I updated my post to indicate success when using the Tx to configure, not eepe or eepeV2, like you suggest.
Thanks
by Galand
Sun Mar 03, 2019 10:16 pm
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Re: FRSKY R9M compatibility?

Hi Mike, Sorry to keep bothering you. The Tx has SVN: er9xV2-pjr822 and MOD: FRSKY NT Using both eepeV2 version p423 and eepe version 422, in the model set-up screen I can only select protocol option PXX/XJT and then as Type D16 or D8 or LR12. R9M option does not show up. Update: Using the Tx to con...
by Galand
Sat Mar 02, 2019 8:09 pm
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Re: FRSKY R9M compatibility?

That worked. Thanks.
Shows version p423
What do I do next to activate the R9M?
Just plug the R9M module in the back?
Which HEX file should I flash to the 9X? mbtx-frskyi-sv.hex or mbtx-frsky.hex?
by Galand
Thu Feb 28, 2019 9:23 pm
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Re: Er9x R9M compatibility?

Does not seem to make a difference. The old Eepe version re-installs normally but not this eepeV2.exe The file size is much smaller, only 25% of the normal Eepe422. I have manually downloaded and installed the dll's it says are missing. All of them seem to relate to C++. It still can't find QtCore4....
by Galand
Thu Feb 28, 2019 12:27 am
Forum: er9x
Topic: FRSKY R9M compatibility?
Replies: 98
Views: 22081

Er9x R9M compatibility?

I want to install the R9M module on one of my TH9X radios with the Smartieparts board. I have ER9x-r820 on the radio and Eep 422 on the PC. I downloaded and tried to install mltx5a.zip with eepeV2.exe. With double click it gives a System Error saying "cannot proceed because Qtcore4.dll, QtNetwork4.d...
by Galand
Mon Jun 11, 2018 4:14 pm
Forum: erskyTx (was ersky9x)
Topic: ErSky9x Manual
Replies: 4
Views: 1586

Re: ErSky9x Manual

Thanks Joao. I am feeling my way through it. When copying my model set-ups from Er9x, many channels has a Switch (LD) inserted. The LD switch itself is blank. No idea where this comes from, nor what it means. I deleted all the LD switch inserts (about 100 lines for 30 models). The models all now wor...
by Galand
Sun Jun 03, 2018 8:53 pm
Forum: erskyTx (was ersky9x)
Topic: ErSky9x Manual
Replies: 4
Views: 1586

ErSky9x Manual

I am fairly familiar with Er9x and just upgraded with an AR9x board.
I see all sorts of goodies in the menus, but is there a manual to study?
by Galand
Sun Sep 16, 2012 4:49 pm
Forum: er9x
Topic: 3 rapid beeps. Meaning?
Replies: 5
Views: 1230

3 rapid beeps. Meaning?

One of my Er9x Tx's with r767 after being ON for a while starts giving three rapid beeps follwed by a 2 sec pause and then again 3 beeps etc... After another 4-5 minute it stops doing that. My other Tx's do not do that. They are all supposed to have the same settings. I checked things like timer, in...
by Galand
Tue Mar 06, 2012 11:25 pm
Forum: er9x
Topic: How to use er9X with/as a buddy box trainer
Replies: 57
Views: 16581

Re: How to use er9X with/as a buddy box trainer

I solved my problem by discovering that in the settings the throttles cannel was showing ADD instead of SUBSTITUTE. How stupid can you be! As to diodes and resistors, we should find a way to separate that sort of discussion from the programming and mixing issues. Not that diodes etc... are not inter...
by Galand
Sat Mar 03, 2012 1:51 am
Forum: er9x
Topic: How to use er9X with/as a buddy box trainer
Replies: 57
Views: 16581

Re: How to use er9X with/as a buddy box trainer

cre8tiveleo wrote:settings for trainer 'on' on master - trainer 'off' on student box?
Yes to both. If not the control surfaces should not work either. Correct?
Edit:
I suspect that playing with the calibration settings could fix it.
by Galand
Sat Mar 03, 2012 1:20 am
Forum: er9x
Topic: How to use er9X with/as a buddy box trainer
Replies: 57
Views: 16581

Re: Throttle range synch problem

I set up a buddy box link between two Er9x Tx's using the simple cable and disconnecting the module on the student Tx. Works fine for all the control surfaces but not for throttle. As soon as I flick the Trainer switch, the motor spins up even with the student throttle all the way down. When I set t...
by Galand
Mon Jan 23, 2012 1:46 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Controlling a strobe light
Replies: 10
Views: 3136

Re: Controlling a strobe light

Wheelspinner, I'll be [email protected]#&****d It was set at 6 channels. Changed it to 8 channels and BINGO!!!! Nothing wrong with the Rx's. Simple mix 100% MAX AIL It works. Thanks a million! I never noticed that option. Why does it exists? Occam's razor? At least, I would suggest that, if it is set to 6Ch, then ...
by Galand
Mon Jan 23, 2012 12:33 am
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Controlling a strobe light
Replies: 10
Views: 3136

Re: Controlling a strobe light

Interesting! Per your recommendation, tested with servos and found something rather strange. Neither Ch7 nor Ch8 move the servo's and that on two different 8/9Ch receivers. One is a Turnigy and the other is a Flysky. Both are 8/9 channel V2's The test: 1)Copied the working +100%AIL line from Ch1 int...
by Galand
Sun Jan 22, 2012 9:29 pm
Forum: er9x / gruvin9x / th9 based firmwares
Topic: Controlling a strobe light
Replies: 10
Views: 3136

Controlling a strobe light

I ordered and received from Flytron a white Strobon flashing LED. http://www.flytron.com/rc-light-systems/99-strobon-navigation-strobe-light.html It flashes very brightly and it runs fine off a battery or when plugged into the Batt Channel, however when plugged into a normal receiver channel I canno...
by Galand
Thu Jan 19, 2012 12:11 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: Good Customer Service from Steven (SmartieParts)
Replies: 0
Views: 1253

Good Customer Service from Steven (SmartieParts)

I had an early Rev 2 board from Dec 2010 that created intermittent reboots.
I did not realize what was going on until recently and that it was a known issue and was fixed in Rev 2.1 boards.
Steven, very correctly, shipped me a new board which just arrived.
Thanks
by Galand
Wed Jan 18, 2012 11:59 pm
Forum: er9x
Topic: Intermittent reboots
Replies: 9
Views: 2421

Re: Intermittent reboots

The free replacement SmartieParts board arrived today.
Steven stands behind his product!
Thanks and congratulations on that.
by Galand
Sat Jan 07, 2012 1:13 am
Forum: SMARTIEPARTS PROGRAMMER
Topic: Basic Installation
Replies: 43
Views: 19154

Re: Basic Installation

Boy, that sucks!!!
by Galand
Fri Jan 06, 2012 10:27 pm
Forum: SMARTIEPARTS PROGRAMMER
Topic: Basic Installation
Replies: 43
Views: 19154

Re: Basic Installation

RCplanehobby.com, where did you get the radio?? was it recently?? Just wondering if it was from Hobbypartz? no got it from leadershobby... http://www.leaderhobby.com/product.asp?ID=9394001220239 RC Plane, do I understand this correctly that you got a Tx with a V1 board from Leaders? I thought that ...

Go to advanced search