openrcforums

nice! I don't use my T9x anymore ever since i got my taranis, but still good to know we have a work around for the issues, so the question is what "Shift Sel" does?

Sent from my SM-N9005 using Tapatalk

hi mike what i mean it this http://www.rcgroups.com/forums/showthread.php?t=1417350 I don't actually solder my modules directly to the board :), I didn't adjust the frame time as it was recommend or i think it was I will try that later, my spare TX decided to die on me, if possible I don't really wa...

I can confirm a few thing, - Yes it beeper from my TX not from the rangelink modules - I don't have voice mode and speaker mod - It from Stock beeper no add-on Are you powering something else from the 5V regulator that powers the buzzer? The only problems with glitches I know about is when using the...

jhsa wrote:Strange, it shouldn't do that.. what mods have you done?

João

only mod i done is lcd back light with bs170 and the ppm resistor fix

my model setup is

proto: ppm 12ch 300us

Are you using the trainer port as the output to the RF module? that would explain it.. If you are, try enabling PPMSIM on your radio by going to your model main cnfiguration screen, scroll down to "Protocol" or "Proto" and choose PPMSIM there.. João nope i'm not using trainer po...

hello all, i been having this buzzer glitch problem, everytime buzzer is active/sound my rx glitches here is video showing ot happen http://www.youtube.com/watch?v=aex9Y8OD0lw i think have posted before but i can't seem to find the post, test only done with er9x i haven't tested it with open9x yet

Kilrah wrote:No, but better than a defective 9x one

true hard to find stock replacement, if 9xr can fit i have 2 tx waiting for gimbal replacement

Sent from my GT-N7000 using Tapatalk 2

Hobbyking will start selling 9XR parts soon, so we gonna have an option for gimbal, does anyone have 9XR and T9x can compare? will the 9Xr gimbal fit w/o any hardwork?

pls made the system admin configure mod rewrite for the web server correctly so we can keep the old links

Sent from my GT-N7000 using Tapatalk 2

finally fixed this juat by cleaning the pot using contact cleaner spray, was a lucky shot as someone on youtube suggested me so so far been stable!

Sent from my GT-N7000 using Tapatalk 2

ah ok will try that, for now I did enable throttle trim which leave me a null throttle at 1-2% of my stick until i get throttle respond from my quad

Thanks!

Hi, recently (actually quick sometime now) I have my AQ50D Pro with TowerPro 18A ESC, one problem always hunting me is the throttle value that ESC got from the TX, if I do normal calibration for throttle range my FC will always see my throttle is not idle I have to enable throttle trim and trim my t...

hello there, dear ppl. please. let me know, here in this topic, if you find any other change made on turnigy 9x transmitter, like this plastic molding difference on the module pins. thank you very much. Marton. not much beside what I can see: 1. plastic mold at the pin 2. New 3 way switch :) 3. the...

sorry the 470ohm is use for protection when upgrading the DJT modules? I have none at the moment I can live w/o the 470ohm ?

that wont stop us soldering , I have 4 of those D4FR might end up soldering then rather than buying a new one just yet

You must have pushed pretty hard for it to break? Probably yes :P, I was like what the hell this thing don't want to go in pressed it then heard something broke, I taken out the DJT i heard crackling sound from inside and opened up to find the PPM pin was snap off from the PCB board, I even need to...

the new TX broke my DJT pin as I didnt notice the extra plastic I have to open up my DJT and re-solder the pin, then proceed with killing the extra plastic with a wire cutter, I wish have checked before plugging in my DJT

ah no luck then should just keep the old unit for part if no option to fix the pot

Sent from my GT-N7000 using Tapatalk 2

Till today no one could find replacement pots.. they are 90º pots, that means they have the 5K 45º to each side of the pot.. ugh that not good to hear, guess i will have a semi unused tx maybe i can sell it for part still i need a backup tx, but i saw on ersky9x web listed a pot replacement Sent fr...

new radio work perfect even with stock firmware so Definitely something wrong with the old tx, my first suspect is the pot, gonna try to replace the pot but what the value of the pot? and i dont have any idea how to remove the pot from tje gimbal

Sent from my GT-N7000 using Tapatalk 2

I've tested with my new radio after reading the posts here. Gently pushed the throttle forward and I get no movement on the rudder servo at all.. of course if I operate the throttle in the normal way the rudder will move because of me not the radio.. That means the pots are doing their job.. 8-) my...

ahh just noticed that then i guess using that wont happen then

alright I followed some of the recommendation, my TX was set to medium trim at first after a I saw it overshoot the trim I landed the quad and change it to ExFine, much better but still either overshoot or less trim, I have to live with that until my new backup TX arrive for now opening it up for Te...

great thanks

nice post i have been looking for this, making my own sensor but after I have my TX modded with telemetry

thank for the mod but I don't have smd resistor i guess i can still use normal resistor just a bit bulky

What is your trim increment set to? Can you try to change it to fine or extra fine? Maybe the incremental change is too great and it is overshooting each time you try. ah will try that, i have expo at 30% but that wont do much as it only for middle stick for rudder but will test the trim adjustment...

I'm using er9x my mods only those back light from hobbyking, my spare still on slow boat from china should be arriving anytime soon, i haven't try any other fw just yet so far i have tested with mt FrSky DJT and the original modules and fkysky modules results are the same i have try to trim it out b...

I manage to order one before it gone to backordered, this is my second tx9x will need to fix my first tx having yaw pot problem

Sent from my GT-N7000 using Tapatalk 2

here a video of my quad flying indoor, you will notice it will slowly turn to right (I'm flying nose out)

http://www.youtube.com/watch?v=SDYEj7af3Qw

same result when i fly outside, I swapped my TX with my friend futaba 8FG we can't re-produce the problem happen with my TX9x