Search found 12 matches

by cu19x
Wed Jun 12, 2019 7:55 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR PRO protocol with XJT and R-XSR (S-BUS)
Replies: 9
Views: 891

Re: 9XR PRO protocol with XJT and R-XSR (S-BUS)

Ahaa. Actually I have connected my receiver with FC through F.Port. So from what I've understood, the Sbus fast communication (compared with PPM) is not for TX-RX communication, but RX-FC communication. Is that so? If this is correct, it wouldn't play any role, the choice of the protocol on my TX, a...
by cu19x
Tue Jun 11, 2019 11:07 am
Forum: Turnigy 9XR PRO radio
Topic: 9XR PRO protocol with XJT and R-XSR (S-BUS)
Replies: 9
Views: 891

Re: 9XR PRO protocol with XJT and R-XSR (S-BUS)

No mater which protocol I choose, the binding process is done correctly (the lights on the receiver and on the module are correct). When I am activating PPM protocol, I can see real inputs in betaflight (in real time). When I activate PXX protocol, the lights on the receiver and on the module are st...
by cu19x
Mon Jun 10, 2019 8:54 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR PRO protocol with XJT and R-XSR (S-BUS)
Replies: 9
Views: 891

Re: 9XR PRO protocol with XJT and R-XSR (S-BUS)

I believe that both of them are EU. How can I confirm?

Sent from my SM-N950F using Tapatalk

by cu19x
Mon Jun 10, 2019 4:08 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR PRO protocol with XJT and R-XSR (S-BUS)
Replies: 9
Views: 891

Re: 9XR PRO protocol with XJT and R-XSR (S-BUS)

The internal on QX7. I was expecting the module to arrive at that time

Sent from my SM-N950F using Tapatalk

by cu19x
Mon Jun 10, 2019 12:55 pm
Forum: Turnigy 9XR PRO radio
Topic: 9XR PRO protocol with XJT and R-XSR (S-BUS)
Replies: 9
Views: 891

9XR PRO protocol with XJT and R-XSR (S-BUS)

Dear all, I am using 9XR PRO in several of my models. Recently I made a new quad with a R-XSR receiver and a XJT module (as my old DJT couldn't be paired). In the time that I waited the module to arrive, I borrowed a Taranis QX7 from a friend, where I successfully bind it in D16 mode. The bind and t...
by cu19x
Thu Nov 20, 2014 2:27 pm
Forum: ersky9xr
Topic: 9XR Pro and Futaba GY401
Replies: 7
Views: 1717

Re: 9XR Pro and Futaba GY401

Hehe, it works (seems you know some things :D )...
Just to clear everything, your 2 last suggestions are just to simplify my 3 mix lines for the same job. But please could you confirm that my 3 mix lines suggestion is correct and works?
by cu19x
Thu Nov 20, 2014 1:33 pm
Forum: ersky9xr
Topic: 9XR Pro and Futaba GY401
Replies: 7
Views: 1717

Re: 9XR Pro and Futaba GY401

Ahhh, thanks again Mike. Unfortunately, I don't have the option of SWCH(IDx) but I have 3POS instead (seams to work like you say in eePskye simulation). My question here is that this way seems to work only if the case uses 3 values with the same "distance". If I wanted to put ID0 +45, ID1 +75, ID2 +...
by cu19x
Thu Nov 20, 2014 8:59 am
Forum: ersky9xr
Topic: 9XR Pro and Futaba GY401
Replies: 7
Views: 1717

Re: 9XR Pro and Futaba GY401

Returning to my previous post, because seems to be big and complicated , I am wondering if its possible to explain-verify the followings: 1) [+80%HALF switch(!GEA) and -60%HALF switch(GEA)]. Is this programming correct for 80% HH and 60% RM as a true result? 2) [+80%HALF switch(!GEA) ]. Is this prog...
by cu19x
Wed Nov 19, 2014 8:13 pm
Forum: ersky9xr
Topic: 9XR Pro and Futaba GY401
Replies: 7
Views: 1717

9XR Pro and Futaba GY401

Dear all, I have bought a Turnigy 9XR Pro (lot more complicate than my Futaba 7CP) running on stock, with the combination of RC long time (3 years) absence, I need some guidance in some issues. Here, I want to configure correctly the Futaba GY401 gyro, and as the TX hasn't any gyro menu, I figure th...
by cu19x
Wed Nov 19, 2014 7:34 pm
Forum: Turnigy 9XR PRO radio
Topic: Castle ICE 50 Throttle calibration and curves with Turnigy 9
Replies: 5
Views: 1126

Re: Castle ICE 50 Throttle calibration and curves with Turni

Thanks again Mike. Hopefully I can proceed further more securely
by cu19x
Wed Nov 19, 2014 6:15 pm
Forum: Turnigy 9XR PRO radio
Topic: Castle ICE 50 Throttle calibration and curves with Turnigy 9
Replies: 5
Views: 1126

Re: Castle ICE 50 Throttle calibration and curves with Turni

Thanks Mike for the info. But what about the values of limits? Am I doing correctly the calibration (I mean by going to positive values for upper stick position and negative values for lower stick position as limits range are from -100 to +100 and not from 0 to 100)? Also about the curves, if I must...
by cu19x
Wed Nov 19, 2014 1:23 pm
Forum: Turnigy 9XR PRO radio
Topic: Castle ICE 50 Throttle calibration and curves with Turnigy 9
Replies: 5
Views: 1126

Castle ICE 50 Throttle calibration and curves with Turnigy 9

Hello to all, Guys I have just received Turnigy 9XR PRO but still confuses me to several points. 1) I want to make the throttle calibration to my CC Phoenix ICE 50. This TX doesn't have endpoint menu so I think I should do through limits menu (please correct me if I am wrong). To all videos for CC t...

Go to advanced search