Search found 42 matches

by ddano007
Fri Jan 08, 2021 2:00 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

At least Galileo shows up in oXs_gps.cpp... Thanks for tip, I will check my configuration a will try to make some tests on weekend. EDIT 9.I. So short report from today`s testing: 1, I checked my OXS config and I have enabled Galileo in oXs_gps.cpp as it is above ( to be exact: in INAV I have BN-20...
by ddano007
Thu Jan 07, 2021 5:58 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Hi, guys. I bought Aggressor FPV plane and installed Matek`s F411WSE flight controller there. I`m going to learn something about setup & tuning of INAV, however I noticed an interesting thing: at today`s flying INAV was reporting up to 25 satellites. In INAV I have enabled also Galileo satellites. I...
by ddano007
Wed Nov 18, 2020 7:41 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

In oXs_out_frsky.cpp, you can find this code (from line 1612) ... Great thanks, however I was not successful ... Without DS1820 reading to SPORT sychro I had sometimes "peaks" on SatNums caused by SPORT communication problem. With sychro I have peaks on Alt cased by OXS timing influenced by DS1820....
by ddano007
Tue Nov 17, 2020 10:59 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Michel, is it possible to identify, when SPORT packed was sent?
I need to synchronize OneWire communication with SPORT communication and this seems to me the way: start OneWire communication just after SPORT data were sent.
Thanks, Daniel.
by ddano007
Thu May 07, 2020 4:43 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Kilrah wrote:
Wed May 06, 2020 8:32 pm
OpenTX expects to receive GPS speed in knots as that's what the FrSky protocol defines, so you shouldn't send in km/h.
OK, my fault, thanks :oops:
by ddano007
Wed May 06, 2020 7:58 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

It is not a big job but I did it in this way in order to save space in memory? Currently it is already probably not possible to activate all options because the AVR328p chip is short on memory. OK, so let it be. I`m at around 35% used memory including DS1820 one wire files :roll: I do not understan...
by ddano007
Wed May 06, 2020 4:11 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

OK, I will try it and will report the result...
When You will do next OXS upgrade, is it big job to modify the communication to use 16-bit array instead of 8-bit?
by ddano007
Wed May 06, 2020 10:09 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

All ID's from FrSky are defined in file oXs_out_frsky.h e.g. #define A3_FIRST_ID 0x0900 #define A3_LAST_ID 0x090f #define A4_FIRST_ID 0x0910 #define A4_LAST_ID 0x091f Still I fo not directly use those "define". Yes, I tried to modify those definition and nothing happened. I use an array in oXs_out_...
by ddano007
Tue May 05, 2020 6:21 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

@msterns:I made OXS with volt_1&2 send as A3 and A4 and it replaced A3&4 send by R8 RX. Where can I change A3& A4 ID in OXS, please?
by ddano007
Wed Jan 29, 2020 6:20 pm
Forum: erskyTx (was ersky9x)
Topic: Frsky updates
Replies: 198
Views: 38062

Re: Frsky updates

Oh really? Then what about other companies solution then? Futaba, Spektrum, Graupner, Hitec, Jeti, etc? Don't they do the same? :o :shock: Yes. But I `m flying nor of them, I`m flying FrSky. I`ve said You before: They can do, whatever they want, they are commercial company, that`s their business. B...
by ddano007
Wed Jan 29, 2020 2:35 pm
Forum: erskyTx (was ersky9x)
Topic: Frsky updates
Replies: 198
Views: 38062

Re: Frsky updates

... please all ask yourselves, whether you aren`t partly responsible to push FrSKy into the situation, where they are today. Who prepared the ground, that products can sprout up with un-competitive minimum investment and market price and cause unbalanced competitive situations? Many people - many o...
by ddano007
Wed Jan 29, 2020 1:27 pm
Forum: erskyTx (was ersky9x)
Topic: Frsky updates
Replies: 198
Views: 38062

Re: Frsky updates

In my opinion, they can do what the hell they want with their protocols, it is THEIR stuff. but what i see is people that don't even OWN their products bashing them because the protocols will not work with their multiprotocol module. Do you find that fair? I don't. And do You think it`s fair to do ...
by ddano007
Wed Jan 29, 2020 11:49 am
Forum: erskyTx (was ersky9x)
Topic: Frsky updates
Replies: 198
Views: 38062

Re: Frsky updates

... I have nothing to do with Frsky, as I said ... João, I don`t believe You, all the time You are talking like the FrSky`s advocate :lol: I was flying FrSky since autumn 2010, when they released DJT module + first generation od D8R. And `till 2019 I was buying only original D8Rs, no clones. When X...
by ddano007
Sun Oct 27, 2019 9:05 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

It should be possible but it is not reliable. No... :( Not working with only #define T1_SOURCE MS5611 in oXs_config_basic.h I tried to add #elif defined(T1_SOURCE) && ( T1_SOURCE == MS5611) p_measurements[16] = &oXs_MS5611.varioData.temperature ; idToReply |= 0x10 ; to oXs_out_frsky.cpp, but no res...
by ddano007
Fri Oct 25, 2019 8:34 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Guys, is it possible to use MS5611 as temperature source ...

#define T1_SOURCE MS5611

... in FrSky HUB/ SPORT protocol? It is an option in Jeti...

//#define TEMPERATURE_SOURCE NTC // select between MS5611 and NTC

..., will it work in FrSky too? Thanks.
by ddano007
Tue Oct 22, 2019 7:55 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

I just put a new version of oXs on github. I added 2 options in oXs_config_advanced.h in order to fill TEST1 with number of sat and TEST2 with hdop. As asked, number of sat is increased by 100 when there is a GPS 3D fix (or higher). ... Good job, Your project has one big problem, has no donation li...
by ddano007
Tue Oct 22, 2019 8:26 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Carbo thanks. Do You use any keywords at Your changes to be found? One more question: Is there any flag of GPS 3D fix? It can be included in satnum: if 3D fix == 0 => satnum = satnum if 3D fix == 1 => satnum = 100 + satnum EDIT: OK, I found test1.value = GPS_numSat ; test1.available = true ; test2.v...
by ddano007
Mon Oct 21, 2019 7:57 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

I don`t know, whether it was here, but just briefly tested this GPS: https://www.banggood.com/BN-200-Small-Size-M8030-Chipset-GPS-Module-Antenna-GPS-GLONASS-Dual-GNSS-Module-p-1281187.html?rmmds=myorder&cur_warehouse=CN It works, can run on 10Hz, first fix after received from BG < 3min, hot fix < 5s...
by ddano007
Sun Sep 22, 2019 9:28 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

I am not sure it should be possible to support this protocol with oXs. This protocol uses 115200 baud rate which is quite fast for oXs because oXs does not use the hardware UART to communicate with the Rx. It uses a sofware serial UART because some protocol like FRSKY uses an inverted signal (not s...
by ddano007
Fri Sep 20, 2019 5:59 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Not exactly... Some basic wiring: https://github.com/betaflight/betaflight/wiki/Single-wire-FlySky-(IBus)-telemetry Here is type definitions https://github.com/qba667/FlySkyI6/blob/master/source/source/ibustelemetry.h from this project: https://github.com/qba667/MAVLinkToIbus/tree/master/MAVLinkToIB...
by ddano007
Fri Sep 20, 2019 12:19 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Maybe naive question ( to mstrens): isn`t it possible to add FlySky iBus protocol to OXS project? I found some small projects for DIY sensor for FlySky ia6B/ ia10B receivers, but nothing so complex as OXS...
by ddano007
Sun Dec 31, 2017 5:33 pm
Forum: companion9x
Topic: Companion and colors in telemetry log chart
Replies: 0
Views: 4205

Companion and colors in telemetry log chart

Hello, gyus, does somebody know, how to change default colors in Companion`s telemetry log charts? The third color ( yellow) is not very suitable for old man`s eyes, so I want to change it. But nor Mr. Google helps me. Thanks. :roll:
by ddano007
Fri Dec 15, 2017 11:58 am
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New to openXsensor - GPS and smartport question
Replies: 74
Views: 19503

Re: New to openXsensor - GPS and smartport question

1) The GPS has two leds. One for power one for satellite fix. When GPS has a good fix, the green LED starts to blink. oXs does not send data via Smartport before GPS has a good fix OK, you have another type... 2) I would strongly advice NOT to buy the GPS I have. I realy think it's counterfeit/fake...
by ddano007
Thu Dec 14, 2017 7:28 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New to openXsensor - GPS and smartport question
Replies: 74
Views: 19503

Re: New to openXsensor - GPS and smartport question

Questions to twincam1449: 1, How do you know, that your GPS fix position? I have two LEDs on GPS, green ( blue) blink when GPS send data to OXS ( 10x per second ), red blink when GPS fix position 1x per second. Until GPS has no fix, OXS doesn`t send data do RX. 2, can you give some photos of your ox...
by ddano007
Wed Dec 13, 2017 9:27 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor V8.0 16bit ADC and analog Airspeedsensor
Replies: 27
Views: 9988

Re: openXsensor V8.0 16bit ADC and analog Airspeedsensor

OK, thanks.
I read oxs_config_description.h, but it`s not clear from it, whether A0 and A1 can be swapped. It`s better for wiring. Some photos from my yesterday`s build:
05_OXS.jpg
Input resistors 56k 0603 size + baro.
04_OXS.jpg
100nF caps and 4k7 resistor 0805 size on bottom. Above 4k7 resistor there is also 100nF cap.
03_OXS.jpg
OXS + connector board.
02_OXS.jpg
In box.
01_OXS.jpg
Complete :-)
by ddano007
Tue Dec 12, 2017 4:57 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor V8.0 16bit ADC and analog Airspeedsensor
Replies: 27
Views: 9988

Re: openXsensor V8.0 16bit ADC and analog Airspeedsensor

Guys, is it possible to use on A0 reference mid- supply 4k7 + 4k7 and on A1 input from MPXV7002DP with
#define ADS_MEASURE A0_TO_A1 , ADS_OFF , ADS_OFF , ADS_OFF
configuration?
by ddano007
Thu Dec 07, 2017 12:54 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor V8.0 16bit ADC and analog Airspeedsensor
Replies: 27
Views: 9988

Re: openXsensor V8.0 16bit ADC and analog Airspeedsensor

OK, thanks a lot for Your response , I will try it. So as I understand it: 1, in Taranis I must setup precision & range for AxxY ( I was wrong before, on AccX I have Model_QID) so that I get 200km/h at 2V from ADS1115? 2, special handling of Acc values I noticed before :mrgreen: 3, oXs_ads1115.adsAi...
by ddano007
Wed Dec 06, 2017 9:01 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor V8.0 16bit ADC and analog Airspeedsensor
Replies: 27
Views: 9988

Re: openXsensor V8.0 16bit ADC and analog Airspeedsensor

Yes, of course I have #define AIRSPEED_SENSOR_USE MPXV7002 // select between NO_AIRSPEED , MS4525 , MPXV7002 I forgot it to write it here :-( Well, if I will comment AccX, speed will be send as what variable... ? In FrSky Hub protocol I see nothing for airspeed :-( And once more: the measurement ran...
by ddano007
Wed Dec 06, 2017 8:14 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: openXsensor V8.0 16bit ADC and analog Airspeedsensor
Replies: 27
Views: 9988

Re: openXsensor V8.0 16bit ADC and analog Airspeedsensor

Guys, can you help me, please, with MPXV7002DP? This is my config: oXs_config_basic.h: // ***** 2.1 - Frsky data ***** ... #define ACCY_SOURCE ADS_VOLT_1 // select between TEST_1, TEST_2, TEST_3, GLIDER_RATIO , SECONDS_SINCE_T0 ,AVERAGE_VSPEED_SINCE_TO , VOLT_1, VOLT_2, VOLT_3, VOLT_4, VOLT_5, VOLT_...
by ddano007
Mon Nov 06, 2017 8:06 pm
Forum: OpenXVario - an open source vario supported by the open source firmwares!!
Topic: New beta version of openXsensor (=openXvario)
Replies: 536
Views: 133522

Re: New beta version of openXsensor (=openXvario)

Thanks a lot for your response, by the time I found, how to download it. Yes, I know, that XOS support NTC sensors, but digital is digital :roll:
DS18B20 is not so expensive, I`m going to try it. Great thanks for all your work at OXS.

Go to advanced search